/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "agesawrapper.h"
#include "amdlib.h"
#include "BiosCallOuts.h"
#include "Ids.h"
#include "OptionsIds.h"
#include "heapManager.h"
#include <northbridge/amd/agesa/family15/dimmSpd.h>
#include <arch/io.h>

#ifdef __PRE_RAM__
/* These defines are used to select the appropriate socket for the SPD read
 * because this is a multi-socket design.
 */
#define PCI_REG_GPIO_48_47_46_37_CNTRL   (0xA6)
#define PCI_REG_GPIO_52_to_49_CNTRL      (0x50)
#define GPIO_OUT_BIT_GPIO48              (BIT3)
#define GPIO_OUT_BIT_GPIO49              (BIT0)
#define GPIO_OUT_ENABLE_BIT_GPIO48       (BIT7)
#define GPIO_OUT_ENABLE_BIT_GPIO49       (BIT4)

static UINT8 select_socket(UINT8 socket_id)
{
	device_t sm_dev       = PCI_DEV(0, 0x14, 0); //SMBUS
	UINT8    value        = 0;
	UINT8    gpio52_to_49 = 0;

	/* Configure GPIO49,48 to select the desired socket
	 * GPIO49,48 control the IDTQS3253 S1,S0
	 *  S1 S0 true table
	 *   0  0   channel 0
	 *   0  1   channel 1
	 *   1  0   channel 2   -  Socket 0
	 *   1  1   channel 3   -  Socket 1
	 * Note: Above is abstracted from Schematic. But actually it seems to be other way.
	 *   1  0   channel 2   -  Socket 1
	 *   1  1   channel 3   -  Socket 0
	 * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
	 */
	gpio52_to_49 = pci_read_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL);
	value  = gpio52_to_49 | GPIO_OUT_BIT_GPIO49; // Output of GPIO49 is always forced to "1"
	value &= ~(GPIO_OUT_ENABLE_BIT_GPIO49); // 0=Output Enabled, 1=Tristate
	pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, value);

	value  = pci_read_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL);
	value &= ~(GPIO_OUT_BIT_GPIO48);
	value |= (~(socket_id & 1)) << 3;  // Output of GPIO48 is inverse of SocketId
	value &= ~(GPIO_OUT_ENABLE_BIT_GPIO48); // 0=Output Enabled, 1=Tristate
	pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, value);

	return gpio52_to_49;
}

static void restore_socket(UINT8 original_value)
{
	device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
	pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, original_value);

	// TODO: Restore previous GPIO48 configurations?
	//pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, gpio48_47_46_37_save);
}
#endif

STATIC BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
	{
		AGESA_ALLOCATE_BUFFER,
		BiosAllocateBuffer
	},

	{
		AGESA_DEALLOCATE_BUFFER,
		BiosDeallocateBuffer
	},

	{
		AGESA_DO_RESET,
		BiosReset
	},

	{
		AGESA_LOCATE_BUFFER,
		BiosLocateBuffer
	},

	{
		AGESA_READ_SPD,
		BiosReadSpd
	},

	{
		AGESA_READ_SPD_RECOVERY,
		BiosDefaultRet
	},

	{
		AGESA_RUNFUNC_ONAP,
		BiosRunFuncOnAp
	},

	{
		AGESA_GET_IDS_INIT_DATA,
		BiosGetIdsInitData
	},

	{
		AGESA_HOOKBEFORE_DQS_TRAINING,
		BiosHookBeforeDQSTraining
	},

	{
		AGESA_HOOKBEFORE_DRAM_INIT,
		BiosHookBeforeDramInit
	},
	{
		AGESA_HOOKBEFORE_EXIT_SELF_REF,
		BiosHookBeforeExitSelfRefresh
	},
};

AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	UINTN i;
	AGESA_STATUS CalloutStatus;
	UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);

	for (i = 0; i < CallOutCount; i++) {
		if (BiosCallouts[i].CalloutName == Func) {
			break;
		}
	}

	if(i >= CallOutCount) {
		return AGESA_UNSUPPORTED;
	}

	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);

	return CalloutStatus;
}


CONST IDS_NV_ITEM IdsData[] =
{
	/*{
	  AGESA_IDS_NV_MAIN_PLL_CON,
	  0x1
	  },
	  {
	  AGESA_IDS_NV_MAIN_PLL_FID_EN,
	  0x1
	  },
	  {
	  AGESA_IDS_NV_MAIN_PLL_FID,
	  0x8
	  },

	  {
	  AGESA_IDS_NV_CUSTOM_NB_PSTATE,
	  },
	  {
	  AGESA_IDS_NV_CUSTOM_NB_P0_DIV_CTRL,
	  },
	  {
	  AGESA_IDS_NV_CUSTOM_NB_P1_DIV_CTRL,
	  },
	  {
	  AGESA_IDS_NV_FORCE_NB_PSTATE,
	  },
	 */
	{
		0xFFFF,
		0xFFFF
	}
};

#define   NUM_IDS_ENTRIES    (sizeof (IdsData) / sizeof (IDS_NV_ITEM))

AGESA_STATUS BiosGetIdsInitData (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	UINTN   i;
	IDS_NV_ITEM *IdsPtr;

	IdsPtr = ((IDS_CALLOUT_STRUCT *) ConfigPtr)->IdsNvPtr;

	if (Data == IDS_CALLOUT_INIT) {
		for (i = 0; i < NUM_IDS_ENTRIES; i++) {
			IdsPtr[i].IdsNvValue = IdsData[i].IdsNvValue;
			IdsPtr[i].IdsNvId = IdsData[i].IdsNvId;
		}
	}
	return AGESA_SUCCESS;
}


AGESA_STATUS BiosAllocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	UINT32              AvailableHeapSize;
	UINT8               *BiosHeapBaseAddr;
	UINT32              CurrNodeOffset;
	UINT32              PrevNodeOffset;
	UINT32              FreedNodeOffset;
	UINT32              BestFitNodeOffset;
	UINT32              BestFitPrevNodeOffset;
	UINT32              NextFreeOffset;
	BIOS_BUFFER_NODE   *CurrNodePtr;
	BIOS_BUFFER_NODE   *FreedNodePtr;
	BIOS_BUFFER_NODE   *BestFitNodePtr;
	BIOS_BUFFER_NODE   *BestFitPrevNodePtr;
	BIOS_BUFFER_NODE   *NextFreePtr;
	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
	AGESA_BUFFER_PARAMS *AllocParams;

	AllocParams = ((AGESA_BUFFER_PARAMS *) ConfigPtr);
	AllocParams->BufferPointer = NULL;

	AvailableHeapSize = BIOS_HEAP_SIZE - sizeof (BIOS_HEAP_MANAGER);
	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;

	if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) {
		/* First allocation */
		CurrNodeOffset = sizeof (BIOS_HEAP_MANAGER);
		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
		CurrNodePtr->BufferHandle = AllocParams->BufferHandle;
		CurrNodePtr->BufferSize = AllocParams->BufferLength;
		CurrNodePtr->NextNodeOffset = 0;
		AllocParams->BufferPointer = (UINT8 *) CurrNodePtr + sizeof (BIOS_BUFFER_NODE);

		/* Update the remaining free space */
		FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize + sizeof (BIOS_BUFFER_NODE);
		FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
		FreedNodePtr->BufferSize = AvailableHeapSize - sizeof (BIOS_BUFFER_NODE) - CurrNodePtr->BufferSize;
		FreedNodePtr->NextNodeOffset = 0;

		/* Update the offsets for Allocated and Freed nodes */
		BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset;
		BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset;
	} else {
		/* Find out whether BufferHandle has been allocated on the heap. */
		/* If it has, return AGESA_BOUNDS_CHK */
		CurrNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
		CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);

		while (CurrNodeOffset != 0) {
			CurrNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + CurrNodeOffset);
			if (CurrNodePtr->BufferHandle == AllocParams->BufferHandle) {
				return AGESA_BOUNDS_CHK;
			}
			CurrNodeOffset = CurrNodePtr->NextNodeOffset;
			/* If BufferHandle has not been allocated on the heap, CurrNodePtr here points
			   to the end of the allocated nodes list.
			 */

		}
		/* Find the node that best fits the requested buffer size */
		FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
		PrevNodeOffset = FreedNodeOffset;
		BestFitNodeOffset = 0;
		BestFitPrevNodeOffset = 0;
		while (FreedNodeOffset != 0) {
			FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);
			if (FreedNodePtr->BufferSize >= (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
				if (BestFitNodeOffset == 0) {
					/* First node that fits the requested buffer size */
					BestFitNodeOffset = FreedNodeOffset;
					BestFitPrevNodeOffset = PrevNodeOffset;
				} else {
					/* Find out whether current node is a better fit than the previous nodes */
					BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
					if (BestFitNodePtr->BufferSize > FreedNodePtr->BufferSize) {
						BestFitNodeOffset = FreedNodeOffset;
						BestFitPrevNodeOffset = PrevNodeOffset;
					}
				}
			}
			PrevNodeOffset = FreedNodeOffset;
			FreedNodeOffset = FreedNodePtr->NextNodeOffset;
		} /* end of while loop */


		if (BestFitNodeOffset == 0) {
			/* If we could not find a node that fits the requested buffer */
			/* size, return AGESA_BOUNDS_CHK */
			return AGESA_BOUNDS_CHK;
		} else {
			BestFitNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitNodeOffset);
			BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + BestFitPrevNodeOffset);

			/* If BestFitNode is larger than the requested buffer, fragment the node further */
			if (BestFitNodePtr->BufferSize > (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE))) {
				NextFreeOffset = BestFitNodeOffset + AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE);

				NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextFreeOffset);
				NextFreePtr->BufferSize = BestFitNodePtr->BufferSize - (AllocParams->BufferLength + sizeof (BIOS_BUFFER_NODE));
				NextFreePtr->NextNodeOffset = BestFitNodePtr->NextNodeOffset;
			} else {
				/* Otherwise, next free node is NextNodeOffset of BestFitNode */
				NextFreeOffset = BestFitNodePtr->NextNodeOffset;
			}

			/* If BestFitNode is the first buffer in the list, then update
			   StartOfFreedNodes to reflect the new free node
			 */
			if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) {
				BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset;
			} else {
				BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset;
			}

			/* Add BestFitNode to the list of Allocated nodes */
			CurrNodePtr->NextNodeOffset = BestFitNodeOffset;
			BestFitNodePtr->BufferSize = AllocParams->BufferLength;
			BestFitNodePtr->BufferHandle = AllocParams->BufferHandle;
			BestFitNodePtr->NextNodeOffset = 0;

			/* Remove BestFitNode from list of Freed nodes */
			AllocParams->BufferPointer = (UINT8 *) BestFitNodePtr + sizeof (BIOS_BUFFER_NODE);
		}
	}

	return AGESA_SUCCESS;
}

AGESA_STATUS BiosDeallocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{

	UINT8               *BiosHeapBaseAddr;
	UINT32              AllocNodeOffset;
	UINT32              PrevNodeOffset;
	UINT32              NextNodeOffset;
	UINT32              FreedNodeOffset;
	UINT32              EndNodeOffset;
	BIOS_BUFFER_NODE   *AllocNodePtr;
	BIOS_BUFFER_NODE   *PrevNodePtr;
	BIOS_BUFFER_NODE   *FreedNodePtr;
	BIOS_BUFFER_NODE   *NextNodePtr;
	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
	AGESA_BUFFER_PARAMS *AllocParams;

	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;

	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;

	/* Find target node to deallocate in list of allocated nodes.
	   Return AGESA_BOUNDS_CHK if the BufferHandle is not found
	 */
	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
	PrevNodeOffset = AllocNodeOffset;

	while (AllocNodePtr->BufferHandle !=  AllocParams->BufferHandle) {
		if (AllocNodePtr->NextNodeOffset == 0) {
			return AGESA_BOUNDS_CHK;
		}
		PrevNodeOffset = AllocNodeOffset;
		AllocNodeOffset = AllocNodePtr->NextNodeOffset;
		AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
	}

	/* Remove target node from list of allocated nodes */
	PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
	PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;

	/* Zero out the buffer, and clear the BufferHandle */
	LibAmdMemFill ((UINT8 *)AllocNodePtr + sizeof (BIOS_BUFFER_NODE), 0, AllocNodePtr->BufferSize, &(AllocParams->StdHeader));
	AllocNodePtr->BufferHandle = 0;
	AllocNodePtr->BufferSize += sizeof (BIOS_BUFFER_NODE);

	/* Add deallocated node in order to the list of freed nodes */
	FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes;
	FreedNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + FreedNodeOffset);

	EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize;

	if (AllocNodeOffset < FreedNodeOffset) {
		/* Add to the start of the freed list */
		if (EndNodeOffset == FreedNodeOffset) {
			/* If the freed node is adjacent to the first node in the list, concatenate both nodes */
			AllocNodePtr->BufferSize += FreedNodePtr->BufferSize;
			AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset;

			/* Clear the BufferSize and NextNodeOffset of the previous first node */
			FreedNodePtr->BufferSize = 0;
			FreedNodePtr->NextNodeOffset = 0;

		} else {
			/* Otherwise, add freed node to the start of the list
			   Update NextNodeOffset and BufferSize to include the
			   size of BIOS_BUFFER_NODE
			 */
			AllocNodePtr->NextNodeOffset = FreedNodeOffset;
		}
		/* Update StartOfFreedNodes to the new first node */
		BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset;
	} else {
		/* Traverse list of freed nodes to find where the deallocated node
		   should be place
		 */
		NextNodeOffset = FreedNodeOffset;
		NextNodePtr = FreedNodePtr;
		while (AllocNodeOffset > NextNodeOffset) {
			PrevNodeOffset = NextNodeOffset;
			if (NextNodePtr->NextNodeOffset == 0) {
				break;
			}
			NextNodeOffset = NextNodePtr->NextNodeOffset;
			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
		}

		/* If deallocated node is adjacent to the next node,
		   concatenate both nodes
		 */
		if (NextNodeOffset == EndNodeOffset) {
			NextNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + NextNodeOffset);
			AllocNodePtr->BufferSize += NextNodePtr->BufferSize;
			AllocNodePtr->NextNodeOffset = NextNodePtr->NextNodeOffset;

			NextNodePtr->BufferSize = 0;
			NextNodePtr->NextNodeOffset = 0;
		} else {
			/*AllocNodePtr->NextNodeOffset = FreedNodePtr->NextNodeOffset; */
			AllocNodePtr->NextNodeOffset = NextNodeOffset;
		}
		/* If deallocated node is adjacent to the previous node,
		   concatenate both nodes
		 */
		PrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + PrevNodeOffset);
		EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize;
		if (AllocNodeOffset == EndNodeOffset) {
			PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset;
			PrevNodePtr->BufferSize += AllocNodePtr->BufferSize;

			AllocNodePtr->BufferSize = 0;
			AllocNodePtr->NextNodeOffset = 0;
		} else {
			PrevNodePtr->NextNodeOffset = AllocNodeOffset;
		}
	}
	return AGESA_SUCCESS;
}

AGESA_STATUS BiosLocateBuffer (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	UINT32              AllocNodeOffset;
	UINT8               *BiosHeapBaseAddr;
	BIOS_BUFFER_NODE   *AllocNodePtr;
	BIOS_HEAP_MANAGER  *BiosHeapBasePtr;
	AGESA_BUFFER_PARAMS *AllocParams;

	AllocParams = (AGESA_BUFFER_PARAMS *) ConfigPtr;

	BiosHeapBaseAddr = (UINT8 *) BIOS_HEAP_START_ADDRESS;
	BiosHeapBasePtr = (BIOS_HEAP_MANAGER *) BIOS_HEAP_START_ADDRESS;

	AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes;
	AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);

	while (AllocParams->BufferHandle != AllocNodePtr->BufferHandle) {
		if (AllocNodePtr->NextNodeOffset == 0) {
			AllocParams->BufferPointer = NULL;
			AllocParams->BufferLength = 0;
			return AGESA_BOUNDS_CHK;
		} else {
			AllocNodeOffset = AllocNodePtr->NextNodeOffset;
			AllocNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + AllocNodeOffset);
		}
	}

	AllocParams->BufferPointer = (UINT8 *) ((UINT8 *) AllocNodePtr + sizeof (BIOS_BUFFER_NODE));
	AllocParams->BufferLength = AllocNodePtr->BufferSize;

	return AGESA_SUCCESS;

}

AGESA_STATUS BiosRunFuncOnAp (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	AGESA_STATUS        Status;

	Status = agesawrapper_amdlaterunaptask (Data, ConfigPtr);
	return Status;
}

AGESA_STATUS BiosReset (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	AGESA_STATUS        Status;
	UINT8                 Value;
	UINTN               ResetType;
	AMD_CONFIG_PARAMS   *StdHeader;

	ResetType = Data;
	StdHeader = ConfigPtr;

	//
	// Perform the RESET based upon the ResetType. In case of
	// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to
	// AmdResetManager. During the critical condition, where reset is required
	// immediately, the reset will be invoked directly by writing 0x04 to port
	// 0xCF9 (Reset Port).
	//
	switch (ResetType) {
		case WARM_RESET_WHENEVER:
		case COLD_RESET_WHENEVER:
			break;

		case WARM_RESET_IMMEDIATELY:
		case COLD_RESET_IMMEDIATELY:
			Value = 0x06;
			LibAmdIoWrite (AccessWidth8, 0xCf9, &Value, StdHeader);
			break;

		default:
			break;
	}

	Status = 0;
	return Status;
}

AGESA_STATUS BiosReadSpd (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	AGESA_STATUS Status;
#ifdef __PRE_RAM__
	UINT8 original_value = 0;

	if (ConfigPtr == NULL)
		return AGESA_ERROR;

	original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId);

	Status = agesa_ReadSPD (Func, Data, ConfigPtr);

	restore_socket(original_value);
#else
	Status = AGESA_UNSUPPORTED;
#endif

	return Status;
}

AGESA_STATUS BiosDefaultRet (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	return AGESA_UNSUPPORTED;
}

/*  Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDQSTraining (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	return AGESA_SUCCESS;
}

/*  Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	return AGESA_SUCCESS;
}

/*  Call the host environment interface to provide a user hook opportunity. */
AGESA_STATUS BiosHookBeforeExitSelfRefresh (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
	return AGESA_SUCCESS;
}