| bootblock-y += spi.c alternate_cbfs.c |
| bootblock-y += bootblock.c |
| bootblock-y += pinmux.c mct.c power.c |
| # Clock is required for UART |
| bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock_init.c |
| bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock.c |
| bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += monotonic_timer.c |
| ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) |
| bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c |
| endif |
| bootblock-y += wakeup.c |
| bootblock-y += gpio.c |
| bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += timer.c |
| |
| romstage-y += spi.c alternate_cbfs.c |
| romstage-y += clock.c |
| romstage-y += clock_init.c |
| romstage-y += pinmux.c # required by s3c24x0_i2c and uart. |
| romstage-y += dmc_common.c |
| romstage-y += dmc_init_ddr3.c |
| romstage-y += power.c |
| romstage-y += mct.c |
| romstage-y += monotonic_timer.c |
| ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y) |
| romstage-$(CONFIG_EARLY_CONSOLE) += uart.c |
| endif |
| romstage-y += wakeup.c |
| romstage-y += gpio.c |
| romstage-y += timer.c |
| romstage-y += trustzone.c |
| romstage-y += i2c.c |
| #romstage-y += wdt.c |
| romstage-y += cbmem.c |
| |
| ramstage-y += spi.c alternate_cbfs.c |
| ramstage-y += clock.c |
| ramstage-y += clock_init.c |
| ramstage-y += pinmux.c |
| ramstage-y += power.c |
| ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c |
| ramstage-y += cpu.c |
| ramstage-y += tmu.c |
| ramstage-y += mct.c |
| ramstage-y += monotonic_timer.c |
| ramstage-y += timer.c |
| ramstage-y += gpio.c |
| ramstage-y += i2c.c |
| ramstage-y += dp-reg.c |
| ramstage-y += fb.c |
| ramstage-y += usb.c |
| ramstage-y += cbmem.c |
| |
| # Run an intermediate step when producing coreboot.rom |
| # that adds additional components to the final firmware |
| # image outside of CBFS |
| .PHONY: exynos5250_add_bl1 |
| $(obj)/coreboot.rom: exynos5250_add_bl1 |
| exynos5250_add_bl1: $(obj)/coreboot.pre |
| printf " DD Adding Samsung Exynos5250 BL1\n" |
| # TODO(hungte) Change this 'cpu' to soc when build scripts are changed. |
| dd if=3rdparty/cpu/samsung/exynos5250/bl1.bin \ |
| of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 |