| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Nils Jacobs |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <device/pci_def.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <arch/hlt.h> |
| #include <console/console.h> |
| #include <lib.h> |
| #include "cpu/x86/bist.h" |
| #include "cpu/x86/msr.h" |
| #include <cpu/amd/gx2def.h> |
| #include <spd.h> |
| #include "southbridge/amd/cs5536/early_smbus.c" |
| #include "southbridge/amd/cs5536/early_setup.c" |
| |
| static inline int spd_read_byte(unsigned int device, unsigned int address) |
| { |
| if (device != DIMM0) |
| return 0xFF; /* No DIMM1, don't even try. */ |
| |
| return smbus_read_byte(device, address); |
| } |
| |
| #include "northbridge/amd/gx2/raminit.h" |
| #include "northbridge/amd/gx2/pll_reset.c" |
| #include "northbridge/amd/gx2/raminit.c" |
| #include "lib/generic_sdram.c" |
| #include "cpu/amd/geode_gx2/cpureginit.c" |
| #include "cpu/amd/geode_gx2/syspreinit.c" |
| #include "cpu/amd/geode_lx/msrinit.c" |
| |
| void main(unsigned long bist) |
| { |
| static const struct mem_controller memctrl [] = { |
| {.channel0 = {DIMM0, DIMM1}} |
| }; |
| |
| SystemPreInit(); |
| |
| cs5536_early_setup(); |
| |
| /* cs5536_disable_internal_uart disable them. Set them up now... */ |
| cs5536_setup_onchipuart(1); |
| |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| pll_reset(); |
| |
| cpuRegInit(); |
| print_err("done cpuRegInit\n"); |
| |
| sdram_initialize(1, memctrl); |
| print_err("ram setup done\n"); |
| |
| msr_init(); |
| } |