/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Advanced Micro Devices, Inc.
 * Copyright (C) 2012 Ricardo Martins <rasmartins@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include <stdint.h>
#include <stdlib.h>
#include <spd.h>
#include <arch/io.h>
#include <arch/hlt.h>
#include <arch/llshell.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <console/console.h>
#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/lxdef.h>
#include <southbridge/amd/cs5536/cs5536.h>
#include <southbridge/amd/cs5536/early_smbus.c>
#include <southbridge/amd/cs5536/early_setup.c>
#include <superio/smsc/smscsuperio/early_serial.c>

#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1)

static inline int spd_read_byte(unsigned int device, unsigned int address)
{
	/* Only DIMM0 is available. */
	if (device != DIMM0)
		return 0xFF;

	return smbus_read_byte(device, address);
}

#include <northbridge/amd/lx/raminit.h>
#include <northbridge/amd/lx/pll_reset.c>
#include <northbridge/amd/lx/raminit.c>
#include <lib/generic_sdram.c>
#include <cpu/amd/geode_lx/cpureginit.c>
#include <cpu/amd/geode_lx/syspreinit.c>
#include <cpu/amd/geode_lx/msrinit.c>

void main(unsigned long bist)
{
	static const struct mem_controller memctrl[] = {
		{.channel0 = {DIMM0, DIMM1}}
	};

	SystemPreInit();
	msr_init();

	cs5536_early_setup();

	smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
	console_init();

	/* Enable COM3. */
	device_t dev = 	PNP_DEV(0x2e, 0x0b);
	u16 port = dev >> 8;
	outb(0x55, port);
	pnp_set_logical_device(dev);
	pnp_set_enable(dev, 0);
	pnp_set_iobase(dev, PNP_IDX_IO0, 0x3e8);
	pnp_set_irq(dev, PNP_IDX_IRQ0, 4);
	pnp_set_enable(dev, 1);
	outb(0xaa, port);

	report_bist_failure(bist);

	pll_reset();

	cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);

	sdram_initialize(1, memctrl);
}