# Config for iei/kino-780am2-fam10
chip northbridge/amd/amdfam10/root_complex
	device cpu_cluster 0 on
		chip cpu/amd/socket_AM2r2  #L1 and DDR2
			 device lapic 0 on end
		end
	end
	device domain 0 on
		chip northbridge/amd/amdfam10
			device pci 18.0 on #  northbridge
				chip southbridge/amd/rs780
					device pci 0.0 on end # HT  	0x9600
					device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
					device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603
					device pci 3.0 on end # PCIE P2P bridge	0x960b
					device pci 4.0 on end # PCIE P2P bridge 0x9604
					device pci 5.0 on end # PCIE P2P bridge 0x9605
					device pci 6.0 off end # PCIE P2P bridge 0x9606
					device pci 7.0 off end # PCIE P2P bridge 0x9607
					device pci 8.0 off end # NB/SB Link P2P bridge
					device pci 9.0 on end #
					device pci a.0 on end #
					register "gppsb_configuration" = "1"   # Configuration B
					register "gpp_configuration" = "3"   # Configuration D default
					register "port_enable" = "0x6fc"
					register "gfx_dev2_dev3" = "1"
					register "gfx_dual_slot" = "1"
					register "gfx_lane_reversal" = "0"
					register "gfx_tmds" = "0"
					register "gfx_compliance" = "0"
					register "gfx_reconfiguration" = "1"
					register "gfx_link_width" = "0"
				end
				chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
					device pci 11.0 on end # SATA
					device pci 12.0 on end # USB
					device pci 12.1 on end # USB
					device pci 12.2 on end # USB
					device pci 13.0 on end # USB
					device pci 13.1 on end # USB
					device pci 13.2 on end # USB
	 				device pci 14.0 on # SM
						chip drivers/generic/generic #dimm 0-0-0
							device i2c 50 on end
						end
						chip drivers/generic/generic #dimm 0-0-1
							device i2c 51 on end
						end
					end # SM
					device pci 14.1 on end # IDE    0x439c
					device pci 14.2 on end # HDA    0x4383
					device pci 14.3 on # LPC	0x439d
						chip superio/fintek/f71859
							device pnp 2e.3 on #  Com1
								io 0x60 = 0x3f8
								irq 0x70 = 4
							end
						end		#SIO
					end		#LPC
					device pci 14.4 on end # PCI 0x4384
					device pci 14.5 on end # USB 2
					register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
				end	#southbridge/amd/sb700
			end #  device pci 18.0
			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
		end
	end #domain
end #root_complex