| /* This file was generated by getpir.c, do not modify! |
| (but if you do, please run checkpir on it to verify) |
| * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up |
| * |
| * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM |
| */ |
| |
| #include <arch/pirq_routing.h> |
| |
| static const struct irq_routing_table intel_irq_routing_table = { |
| PIRQ_SIGNATURE, /* u32 signature */ |
| PIRQ_VERSION, /* u16 version */ |
| 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ |
| 0x00, /* Where the interrupt router lies (bus) */ |
| (0x01<<3)|0x0, /* Where the interrupt router lies (dev) */ |
| 0, /* IRQs devoted exclusively to PCI usage */ |
| 0x8086, /* Vendor */ |
| 0x7000, /* Device */ |
| 0, /* Miniport data */ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ |
| 0x7, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ |
| { |
| /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ |
| {0x00,(0x01<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x0, 0x0}, |
| {0x00,(0x02<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x1, 0x0}, |
| {0x00,(0x03<<3)|0x0, {{0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0x0def8}}, 0x2, 0x0}, |
| {0x00,(0x04<<3)|0x0, {{0x63, 0xdef8}, {0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0x0def8}}, 0x3, 0x0}, |
| {0x00,(0x05<<3)|0x0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0x0def8}}, 0x4, 0x0}, |
| {0x00,(0x06<<3)|0x0, {{0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}, {0x60, 0x0def8}}, 0x5, 0x0}, |
| } |
| }; |
| unsigned long write_pirq_routing_table(unsigned long addr) |
| { |
| return copy_pirq_routing_table(addr, &intel_irq_routing_table); |
| } |
