menu "Console"
# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete.
config CONSOLE_SERIAL8250
	bool "Serial port console output"
	depends on HAVE_UART_IO_MAPPED
	default y
	help
	  Send coreboot debug output to an I/O mapped serial port console.

config CONSOLE_SERIAL8250MEM
	bool "Serial port console output (memory mapped)"
	depends on HAVE_UART_MEMORY_MAPPED
	help
	  Send coreboot debug output to a memory mapped serial port console.

choice
	prompt "Serial port"
	default CONSOLE_SERIAL_COM1
	depends on CONSOLE_SERIAL8250

config CONSOLE_SERIAL_COM1
	bool "COM1/ttyS0, I/O port 0x3f8"
	help
	  Serial console on COM1/ttyS0 at I/O port 0x3f8.
config CONSOLE_SERIAL_COM2
	bool "COM2/ttyS1, I/O port 0x2f8"
	help
	  Serial console on COM2/ttyS1 at I/O port 0x2f8.
config CONSOLE_SERIAL_COM3
	bool "COM3/ttyS2, I/O port 0x3e8"
	help
	  Serial console on COM3/ttyS2 at I/O port 0x3e8.
config CONSOLE_SERIAL_COM4
	bool "COM4/ttyS3, I/O port 0x2e8"
	help
	  Serial console on COM4/ttyS3 at I/O port 0x2e8.

endchoice

config TTYS0_BASE
	hex
	depends on CONSOLE_SERIAL8250
	default 0x3f8 if CONSOLE_SERIAL_COM1
	default 0x2f8 if CONSOLE_SERIAL_COM2
	default 0x3e8 if CONSOLE_SERIAL_COM3
	default 0x2e8 if CONSOLE_SERIAL_COM4
	help
	  Map the COM port names to the respective I/O port.

choice
	prompt "Baud rate"
	default CONSOLE_SERIAL_115200
	depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM

config CONSOLE_SERIAL_115200
	bool "115200"
	help
	  Set serial port Baud rate to 115200.
config CONSOLE_SERIAL_57600
	bool "57600"
	help
	  Set serial port Baud rate to 57600.
config CONSOLE_SERIAL_38400
	bool "38400"
	help
	  Set serial port Baud rate to 38400.
config CONSOLE_SERIAL_19200
	bool "19200"
	help
	  Set serial port Baud rate to 19200.
config CONSOLE_SERIAL_9600
	bool "9600"
	help
	  Set serial port Baud rate to 9600.

endchoice

config TTYS0_BAUD
	int
	default 115200 if CONSOLE_SERIAL_115200
	default 57600 if CONSOLE_SERIAL_57600
	default 38400 if CONSOLE_SERIAL_38400
	default 19200 if CONSOLE_SERIAL_19200
	default 9600 if CONSOLE_SERIAL_9600
	help
	  Map the Baud rates to an integer.

# TODO: Allow user-friendly selection of settings other than 8n1.
config TTYS0_LCS
	int
	default 3
	depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM

# Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code.
config HAVE_USBDEBUG
	def_bool n

config USBDEBUG
	def_bool n

config USBDEBUG
	bool "USB 2.0 EHCI debug dongle support"
	default n
	depends on HAVE_USBDEBUG
	help
	  This option allows you to use a so-called USB EHCI Debug device
	  (such as the Ajays NET20DC, AMIDebug RX, or a system using the
	  Linux "EHCI Debug Device gadget" driver found in recent kernel)
	  to retrieve the coreboot debug messages (instead, or in addition
	  to, a serial port).

	  This feature is NOT supported on all chipsets in coreboot!

	  It also requires a USB2 controller which supports the EHCI
	  Debug Port capability.

	  See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list
	  of supported controllers.

	  If unsure, say N.

# Note: This option doesn't make sense on Intel ICH / AMD SB600 southbridges
# as those hardcode the physical USB port to be used as Debug Port to 1.
# It cannot be changed by coreboot.
config USBDEBUG_DEFAULT_PORT
	int "Default USB port to use as Debug Port"
	default 1
	depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX && !SOUTHBRIDGE_AMD_SB600
	help
	  This option selects which physical USB port coreboot will try to
	  use as EHCI Debug Port first (valid values are: 1-15).

	  If coreboot doesn't detect an EHCI Debug Port dongle on this port,
	  it will try all the other ports one after the other. This will take
	  a few seconds of time though, and thus slow down the booting process.

	  Hence, if you select the correct port here, you can speed up
	  your boot time. Which USB port number (1-15) refers to which
	  actual port on your mainboard (potentially also USB pin headers
	  on your mainboard) is highly board-specific, and you'll likely
	  have to find out by trial-and-error.

# TODO: Deps?
# TODO: Improve description.
config ONBOARD_VGA_IS_PRIMARY
	bool "Use onboard VGA as primary video device"
	default n
	help
	  If not selected, the last adapter found will be used.

config CONSOLE_NE2K
	bool "Network console over NE2000 compatible Ethernet adapter"
	default n
	help
	  Send coreboot debug output to a Ethernet console, it works
	  same way as Linux netconsole, packets are received to UDP
	  port 6666 on IP/MAC specified with options bellow.
	  Use following netcat command: nc -u -l -p 6666

config CONSOLE_NE2K_DST_MAC
	depends on CONSOLE_NE2K
	string "Destination MAC address of remote system"
	default "00:13:d4:76:a2:ac"
	help
	  Type in either MAC address of logging system or MAC address
	  of the router.

config CONSOLE_NE2K_DST_IP
	depends on CONSOLE_NE2K
	string "Destination IP of logging system"
	default "10.0.1.27"
	help
	  This is IP adress of the system running for example
	  netcat command to dump the packets.

config CONSOLE_NE2K_SRC_IP
	depends on CONSOLE_NE2K
	string "IP address of coreboot system"
	default "10.0.1.253"
	help
	  This is the IP of the coreboot system

config CONSOLE_NE2K_IO_PORT
	depends on CONSOLE_NE2K
	hex "NE2000 adapter fixed IO port address"
	default 0xe00
	help
	  This is the IO port address for the IO port
	  on the card, please select some non-conflicting region,
	  32 bytes of IO spaces will be used (and align on 32 bytes
	  boundary, qemu needs broader align)

config CONSOLE_CBMEM
	depends on EARLY_CBMEM_INIT
	bool "Send console output to a CBMEM buffer"
	default n
	help
	  Enable this to save the console output in a CBMEM buffer. This would
	  allow to see coreboot console output from Linux space.

config CONSOLE_CBMEM_BUFFER_SIZE
	depends on CONSOLE_CBMEM
	hex "Room allocated for console output in CBMEM"
	default 0x10000
	help
	  Space allocated for console output storage in CBMEM. The default
	  value (64K or 0x10000 bytes) is large enough to accommodate
	  even the BIOS_SPEW level.

config CONSOLE_CAR_BUFFER_SIZE
	depends on CONSOLE_CBMEM
	hex "Room allocated for console output in Cache as RAM"
	default 0xc00
	help
	  Console is used before RAM is initialized. This is the room reserved
	  in the DCACHE based RAM to keep console output before it can be
	  saved in a CBMEM buffer. 3K bytes should be enough even for the
	  BIOS_SPEW level.


choice
	prompt "Maximum console log level"
	default MAXIMUM_CONSOLE_LOGLEVEL_8

config MAXIMUM_CONSOLE_LOGLEVEL_8
	bool "8: SPEW"
	help
	  Way too many details.
config MAXIMUM_CONSOLE_LOGLEVEL_7
	bool "7: DEBUG"
	help
	  Debug-level messages.
config MAXIMUM_CONSOLE_LOGLEVEL_6
	bool "6: INFO"
	help
	  Informational messages.
config MAXIMUM_CONSOLE_LOGLEVEL_5
	bool "5: NOTICE"
	help
	  Normal but significant conditions.
config MAXIMUM_CONSOLE_LOGLEVEL_4
	bool "4: WARNING"
	help
	  Warning conditions.
config MAXIMUM_CONSOLE_LOGLEVEL_3
	bool "3: ERR"
	help
	  Error conditions.
config MAXIMUM_CONSOLE_LOGLEVEL_2
	bool "2: CRIT"
	help
	  Critical conditions.
config MAXIMUM_CONSOLE_LOGLEVEL_1
	bool "1: ALERT"
	help
	  Action must be taken immediately.
config MAXIMUM_CONSOLE_LOGLEVEL_0
	bool "0: EMERG"
	help
	  System is unusable.

endchoice

config MAXIMUM_CONSOLE_LOGLEVEL
	int
	default 0 if MAXIMUM_CONSOLE_LOGLEVEL_0
	default 1 if MAXIMUM_CONSOLE_LOGLEVEL_1
	default 2 if MAXIMUM_CONSOLE_LOGLEVEL_2
	default 3 if MAXIMUM_CONSOLE_LOGLEVEL_3
	default 4 if MAXIMUM_CONSOLE_LOGLEVEL_4
	default 5 if MAXIMUM_CONSOLE_LOGLEVEL_5
	default 6 if MAXIMUM_CONSOLE_LOGLEVEL_6
	default 7 if MAXIMUM_CONSOLE_LOGLEVEL_7
	default 8 if MAXIMUM_CONSOLE_LOGLEVEL_8
	help
	  Map the log level config names to an integer.

choice
	prompt "Default console log level"
	default DEFAULT_CONSOLE_LOGLEVEL_8

config DEFAULT_CONSOLE_LOGLEVEL_8
	bool "8: SPEW"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8)
	help
	  Way too many details.
config DEFAULT_CONSOLE_LOGLEVEL_7
	bool "7: DEBUG"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7)
	help
	  Debug-level messages.
config DEFAULT_CONSOLE_LOGLEVEL_6
	bool "6: INFO"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6)
	help
	  Informational messages.
config DEFAULT_CONSOLE_LOGLEVEL_5
	bool "5: NOTICE"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5)
	help
	  Normal but significant conditions.
config DEFAULT_CONSOLE_LOGLEVEL_4
	bool "4: WARNING"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_4)
	help
	  Warning conditions.
config DEFAULT_CONSOLE_LOGLEVEL_3
	bool "3: ERR"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3)
	help
	  Error conditions.
config DEFAULT_CONSOLE_LOGLEVEL_2
	bool "2: CRIT"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_2)
	help
	  Critical conditions.
config DEFAULT_CONSOLE_LOGLEVEL_1
	bool "1: ALERT"
	depends on (MAXIMUM_CONSOLE_LOGLEVEL_8 || MAXIMUM_CONSOLE_LOGLEVEL_7 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_6 || MAXIMUM_CONSOLE_LOGLEVEL_5 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_4 || MAXIMUM_CONSOLE_LOGLEVEL_3 ||\
		    MAXIMUM_CONSOLE_LOGLEVEL_2 || MAXIMUM_CONSOLE_LOGLEVEL_1)
	help
	  Action must be taken immediately.
config DEFAULT_CONSOLE_LOGLEVEL_0
	bool "0: EMERG"
	help
	  System is unusable.

endchoice

config DEFAULT_CONSOLE_LOGLEVEL
	int
	default 0 if DEFAULT_CONSOLE_LOGLEVEL_0
	default 1 if DEFAULT_CONSOLE_LOGLEVEL_1
	default 2 if DEFAULT_CONSOLE_LOGLEVEL_2
	default 3 if DEFAULT_CONSOLE_LOGLEVEL_3
	default 4 if DEFAULT_CONSOLE_LOGLEVEL_4
	default 5 if DEFAULT_CONSOLE_LOGLEVEL_5
	default 6 if DEFAULT_CONSOLE_LOGLEVEL_6
	default 7 if DEFAULT_CONSOLE_LOGLEVEL_7
	default 8 if DEFAULT_CONSOLE_LOGLEVEL_8
	help
	  Map the log level config names to an integer.

config CONSOLE_LOGBUF
	bool
	default n

config NO_POST
	bool "Don't show any POST codes"
	default n

config POST_PORT
	hex
	default 0x80

config CONSOLE_POST
	bool "Show POST codes on the debug console"
	depends on !NO_POST
	default n
	help
	  If enabled, coreboot will additionally print POST codes (which are
	  usually displayed using a so-called "POST card" ISA/PCI/PCI-E
	  device) on the debug console.

config CMOS_POST
	bool "Store post codes in CMOS for debugging"
	depends on !NO_POST
	default n
	help
	  If enabled, coreboot will store post codes in CMOS and switch between
	  two offsets on each boot so the last post code in the previous boot
	  can be retrieved.  This uses 3 bytes of CMOS.

config CMOS_POST_OFFSET
	hex "Offset into CMOS to store POST codes"
	depends on CMOS_POST
	default 0
	help
	  If CMOS_POST is enabled then an offset into CMOS must be provided.
	  If CONFIG_HAVE_OPTION_TABLE is enabled then it will use the value
	  defined in the mainboard option table.

endmenu