blob: 444dc38fb15f4b407c6b5bab4159aa23dd2b4473 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Google, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied wacbmem_entryanty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _BAYTRAIL_IOSF_H_
#define _BAYTRAIL_IOSF_H_
#include <stdint.h>
#include <baytrail/pci_devs.h>
/*
* The Bay Trail SoC has a message network called IOSF Sideband. The access
* routines are through 3 registers in PCI config space of 00:00.0:
* MCR - control register
* MDR - data register
* MCRX - control register extension
* The extension regist is only used for addresses that don't fit into the
* 8 bit register address.
*/
#ifndef PCI_DEV
#define PCI_DEV(SEGBUS, DEV, FN) ( \
(((SEGBUS) & 0xFFF) << 20) | \
(((DEV) & 0x1F) << 15) | \
(((FN) & 0x07) << 12))
#endif
#define IOSF_PCI_DEV PCI_DEV(0,SOC_DEV,SOC_FUNC)
#define MCR_REG 0xd0
#define IOSF_OPCODE(x) ((x) << 24)
#define IOSF_PORT(x) ((0xff & (x)) << 16)
#define IOSF_REG(x) ((0xff & (x)) << 8)
#define IOSF_BYTE_EN 0xf0
#define MDR_REG 0xd4
#define MCRX_REG 0xd8
uint32_t iosf_bunit_read(int reg);
void iosf_bunit_write(int reg, uint32_t val);
uint32_t iosf_dunit_read(int reg);
void iosf_dunit_write(int reg, uint32_t val);
/* IOSF ports. */
#define IOSF_PORT_AUNIT 0x00 /* IO Arbiter unit */
#define IOSF_PORT_SYSMEMC 0x01 /* System Memory Controller */
#define IOSF_PORT_CPU_BUS 0x02 /* CPU Bus Interface Controller */
#define IOSF_PORT_BUNIT 0x03 /* System Memroy Arbiter/Bunit */
#define IOSF_PORT_PMC 0x04 /* Power Management Controller */
#define IOSF_PORT_GFX 0x06 /* Graphics Adapter */
#define IOSF_PORT_SYSMEMIO 0x0c /* System Memory IO */
#define IOSF_PORT_USBPHY 0x43 /* USB PHY */
#define IOSF_PORT_SATAPHY 0xa3 /* SATA PHY */
#define IOSF_PORT_PCIEPHY 0xa3 /* PCIE PHY */
/* Read and write opcodes differ per port. */
#define IOSF_OP_READ_AUNIT 0x10
#define IOSF_OP_WRITE_AUNIT (IOSF_OP_READ_AUNIT | 1)
#define IOSF_OP_READ_SYSMEMC 0x10
#define IOSF_OP_WRITE_SYSMEMC (IOSF_OP_READ_SYSMEMC | 1)
#define IOSF_OP_READ_CPU_BUS 0x10
#define IOSF_OP_WRITE_CPU_BUS (IOSF_OP_READ_CPU_BUS | 1)
#define IOSF_OP_READ_BUNIT 0x10
#define IOSF_OP_WRITE_BUNIT (IOSF_OP_READ_BUNIT | 1)
#define IOSF_OP_READ_PMC 0x06
#define IOSF_OP_WRITE_PMC (IOSF_OP_READ_PMC | 1)
#define IOSF_OP_READ_GFX 0x00
#define IOSF_OP_WRITE_GFX (IOSF_OP_READ_GFX | 1)
#define IOSF_OP_READ_SYSMEMIO 0x06
#define IOSF_OP_WRITE_SYSMEMIO (IOSF_OP_READ_SYSMEMIO | 1)
#define IOSF_OP_READ_USBPHY 0x06
#define IOSF_OP_WRITE_USBPHY (IOSF_OP_READ_USBPHY | 1)
#define IOSF_OP_READ_SATAPHY 0x00
#define IOSF_OP_WRITE_SATAPHY (IOSF_OP_READ_SATAPHY | 1)
#define IOSF_OP_READ_PCIEPHY 0x00
#define IOSF_OP_WRITE_PCIEPHY (IOSF_OP_READ_PCIEPHY | 1)
/*
* BUNIT Registers.
*/
#define BNOCACHE 0x23
/* BMBOUND has a 128MiB granularity. Highest address is 0xf8000000. */
#define BUNIT_BMBOUND 0x25
/* BMBOUND_HI describes the available ram above 4GiB. It has a
* 256MiB granularity. Physical address bits 35:28 are compared with 31:24
* bits in the BMBOUND_HI register. Also note that since BMBOUND has 128MiB
* granularity care needs to be taken with the e820 map to account for a hole
* in the ram. */
#define BUNIT_BMBOUND_HI 0x26
#define BUNIT_MMCONF_REG 0x27
/* The SMMRR registers define the SMM region in MiB granularity. */
#define BUNIT_SMRRL 0x2e
#define BUNIT_SMRRH 0x2f
# define BUNIT_SMRR_ENABLE (1 << 31)
/*
* DUNIT Registers.
*/
#define DRP 0x00
# define DRP_CH0_RANK0_EN (0x01 << 0)
# define DRP_CH0_RANK1_EN (0x01 << 1)
# define DRP_CH1_RANK0_EN (0x01 << 2)
# define DRP_CH1_RANK1_EN (0x01 << 3)
#define DTR0 0x01
# define DTR0_SPEED_MASK 0x03
# define DTR0_SPEED_800 0x00
# define DTR0_SPEED_1066 0x01
# define DTR0_SPEED_1333 0x02
# define DTR0_SPEED_1600 0x03
#endif /* _BAYTRAIL_IOSF_H_ */