# Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# This test run is designed to check that the connection manager
# re-scans a few times before quiescing after losing a connection.
# We simulate this by shutting off an AP in full sight of the
# DUT, waiting for a bit, and then re-instating the AP.  We choose
# a hidden AP since this requires the connection manager to do the
# scans (since only the connection manager knows to scan for them,
# as opposed to wpa_supplicant).
{ "name": "RetryConnectHidden",
  "steps":[
    [ "create",         { "type": "hostap" } ],

    # Create a hidden-ssid AP.
    [ "config",         { "channel": "2412", "mode": "11g",
                          "hidessid": None } ],

    # Connect with the intent of retaining this information in the profile
    # so we should auto-connect to it later.
    [ "connect",        { "security": "none", "hidden":True } ],

    # Shut down the AP in full view of the DUT.
    [ "deconfig" ],

    # Wait for the connection manager to acknowledge the connection loss.
    [ "wait_service",   { "run_timeout":40,   # Timeout is 40 seconds
                          "debug":True,       # Print state transitions
                          "states":[
                            (None, 'idle')  # Wait for transition to a
                          ] } ],              # 'idle' state.

    # Allow the client to settle down, so all of the immediate reactions
    # to the disconnection by wpa_supplicant and the connection manager
    # have completed.
    [ "sleep",          { "time":"20" } ],

    # Start the AP up again, at a different frequency.  We start it up
    # after a delay in order to simulate the situation where the initial
    # connection-manager-initiated scan fails to detect the AP.  Scanning
    # isn't perfect, so we want to simulate that case.
    [ "config",         { "channel": "2462", "mode": "11g",
                          "hidessid": None } ],

    # Wait for the connection manager to bring the connection back up after
    # scanning.
    [ "wait_service",   { "run_timeout":40,   # Timeout is 40 seconds
                          "debug":True,       # Print state transitions
                          "states":[
                            (None, 'ready')   # Wait for the default
                          ] } ],              # service to become 'ready'.

    [ "destroy" ],
  ],
}