| #!/usr/bin/python |
| # Copyright (c) 2012 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| |
| import logging |
| import numpy |
| import os |
| import pipes |
| import re |
| import shlex |
| import tempfile |
| import threading |
| import time |
| |
| from glob import glob |
| from autotest_lib.client.bin import test, utils |
| from autotest_lib.client.bin.input.input_device import * |
| from autotest_lib.client.common_lib import error |
| from autotest_lib.client.cros.audio import alsa_utils |
| from autotest_lib.client.cros.audio import audio_data |
| from autotest_lib.client.cros.audio import cmd_utils |
| from autotest_lib.client.cros.audio import cras_utils |
| from autotest_lib.client.cros.audio import sox_utils |
| |
| LD_LIBRARY_PATH = 'LD_LIBRARY_PATH' |
| |
| _AUDIO_DIAGNOSTICS_PATH = '/usr/bin/audio_diagnostics' |
| |
| _DEFAULT_NUM_CHANNELS = 2 |
| _DEFAULT_REC_COMMAND = 'arecord -D hw:0,0 -d 10 -f dat' |
| _DEFAULT_SOX_FORMAT = '-t raw -b 16 -e signed -r 48000 -L' |
| _DEFAULT_PLAYBACK_VOLUME = 100 |
| _DEFAULT_CAPTURE_GAIN = 2500 |
| |
| # Minimum RMS value to pass when checking recorded file. |
| _DEFAULT_SOX_RMS_THRESHOLD = 0.08 |
| |
| _JACK_VALUE_ON_RE = re.compile('.*values=on') |
| _HP_JACK_CONTROL_RE = re.compile('numid=(\d+).*Headphone\sJack') |
| _MIC_JACK_CONTROL_RE = re.compile('numid=(\d+).*Mic\sJack') |
| |
| _SOX_RMS_AMPLITUDE_RE = re.compile('RMS\s+amplitude:\s+(.+)') |
| _SOX_ROUGH_FREQ_RE = re.compile('Rough\s+frequency:\s+(.+)') |
| |
| _AUDIO_NOT_FOUND_RE = r'Audio\snot\sdetected' |
| _MEASURED_LATENCY_RE = r'Measured\sLatency:\s(\d+)\suS' |
| _REPORTED_LATENCY_RE = r'Reported\sLatency:\s(\d+)\suS' |
| |
| # Tools from platform/audiotest |
| AUDIOFUNTEST_PATH = 'audiofuntest' |
| AUDIOLOOP_PATH = 'looptest' |
| LOOPBACK_LATENCY_PATH = 'loopback_latency' |
| SOX_PATH = 'sox' |
| TEST_TONES_PATH = 'test_tones' |
| |
| _MINIMUM_NORM = 0.001 |
| _CORRELATION_INDEX_THRESHOLD = 0.999 |
| # The minimum difference of estimated frequencies between two sine waves. |
| _FREQUENCY_DIFF_THRESHOLD = 10 |
| # The minimum RMS value of meaningful audio data. |
| _MEANINGFUL_RMS_THRESHOLD = 0.001 |
| |
| def set_mixer_controls(mixer_settings={}, card='0'): |
| ''' |
| Sets all mixer controls listed in the mixer settings on card. |
| |
| @param mixer_settings: Mixer settings to set. |
| @param card: Index of audio card to set mixer settings for. |
| ''' |
| logging.info('Setting mixer control values on %s', card) |
| for item in mixer_settings: |
| logging.info('Setting %s to %s on card %s', |
| item['name'], item['value'], card) |
| cmd = 'amixer -c %s cset name=%s %s' |
| cmd = cmd % (card, item['name'], item['value']) |
| try: |
| utils.system(cmd) |
| except error.CmdError: |
| # A card is allowed not to support all the controls, so don't |
| # fail the test here if we get an error. |
| logging.info('amixer command failed: %s', cmd) |
| |
| def set_volume_levels(volume, capture): |
| ''' |
| Sets the volume and capture gain through cras_test_client |
| |
| @param volume: The playback volume to set. |
| @param capture: The capture gain to set. |
| ''' |
| logging.info('Setting volume level to %d', volume) |
| utils.system('/usr/bin/cras_test_client --volume %d' % volume) |
| logging.info('Setting capture gain to %d', capture) |
| utils.system('/usr/bin/cras_test_client --capture_gain %d' % capture) |
| utils.system('/usr/bin/cras_test_client --dump_server_info') |
| utils.system('/usr/bin/cras_test_client --mute 0') |
| utils.system('amixer -c 0 contents') |
| |
| def loopback_latency_check(**args): |
| ''' |
| Checks loopback latency. |
| |
| @param args: additional arguments for loopback_latency. |
| |
| @return A tuple containing measured and reported latency in uS. |
| Return None if no audio detected. |
| ''' |
| noise_threshold = str(args['n']) if args.has_key('n') else '400' |
| |
| cmd = '%s -n %s' % (LOOPBACK_LATENCY_PATH, noise_threshold) |
| |
| output = utils.system_output(cmd, retain_output=True) |
| |
| # Sleep for a short while to make sure device is not busy anymore |
| # after called loopback_latency. |
| time.sleep(.1) |
| |
| measured_latency = None |
| reported_latency = None |
| for line in output.split('\n'): |
| match = re.search(_MEASURED_LATENCY_RE, line, re.I) |
| if match: |
| measured_latency = int(match.group(1)) |
| continue |
| match = re.search(_REPORTED_LATENCY_RE, line, re.I) |
| if match: |
| reported_latency = int(match.group(1)) |
| continue |
| if re.search(_AUDIO_NOT_FOUND_RE, line, re.I): |
| return None |
| if measured_latency and reported_latency: |
| return (measured_latency, reported_latency) |
| else: |
| # Should not reach here, just in case. |
| return None |
| |
| def get_mixer_jack_status(jack_reg_exp): |
| ''' |
| Gets the mixer jack status. |
| |
| @param jack_reg_exp: The regular expression to match jack control name. |
| |
| @return None if the control does not exist, return True if jack control |
| is detected plugged, return False otherwise. |
| ''' |
| output = utils.system_output('amixer -c0 controls', retain_output=True) |
| numid = None |
| for line in output.split('\n'): |
| m = jack_reg_exp.match(line) |
| if m: |
| numid = m.group(1) |
| break |
| |
| # Proceed only when matched numid is not empty. |
| if numid: |
| output = utils.system_output('amixer -c0 cget numid=%s' % numid) |
| for line in output.split('\n'): |
| if _JACK_VALUE_ON_RE.match(line): |
| return True |
| return False |
| else: |
| return None |
| |
| def get_hp_jack_status(): |
| '''Gets the status of headphone jack''' |
| status = get_mixer_jack_status(_HP_JACK_CONTROL_RE) |
| if status is not None: |
| return status |
| |
| # When headphone jack is not found in amixer, lookup input devices |
| # instead. |
| # |
| # TODO(hychao): Check hp/mic jack status dynamically from evdev. And |
| # possibly replace the existing check using amixer. |
| for evdev in glob('/dev/input/event*'): |
| device = InputDevice(evdev) |
| if device.is_hp_jack(): |
| return device.get_headphone_insert() |
| else: |
| return None |
| |
| def get_mic_jack_status(): |
| '''Gets the status of mic jack''' |
| status = get_mixer_jack_status(_MIC_JACK_CONTROL_RE) |
| if status is not None: |
| return status |
| |
| # When mic jack is not found in amixer, lookup input devices instead. |
| for evdev in glob('/dev/input/event*'): |
| device = InputDevice(evdev) |
| if device.is_mic_jack(): |
| return device.get_microphone_insert() |
| else: |
| return None |
| |
| def log_loopback_dongle_status(): |
| ''' |
| Log the status of the loopback dongle to make sure it is equipped correctly. |
| ''' |
| dongle_status_ok = True |
| |
| # Check Mic Jack |
| mic_jack_status = get_mic_jack_status() |
| logging.info('Mic jack status: %s', mic_jack_status) |
| dongle_status_ok &= bool(mic_jack_status) |
| |
| # Check Headphone Jack |
| hp_jack_status = get_hp_jack_status() |
| logging.info('Headphone jack status: %s', hp_jack_status) |
| dongle_status_ok &= bool(hp_jack_status) |
| |
| # Use latency check to test if audio can be captured through dongle. |
| # We only want to know the basic function of dongle, so no need to |
| # assert the latency accuracy here. |
| latency = loopback_latency_check(n=4000) |
| if latency: |
| logging.info('Got latency measured %d, reported %d', |
| latency[0], latency[1]) |
| else: |
| logging.info('Latency check fail.') |
| dongle_status_ok = False |
| |
| logging.info('audio loopback dongle test: %s', |
| 'PASS' if dongle_status_ok else 'FAIL') |
| |
| # Functions to test audio palyback. |
| def play_sound(duration_seconds=None, audio_file_path=None): |
| ''' |
| Plays a sound file found at |audio_file_path| for |duration_seconds|. |
| |
| If |audio_file_path|=None, plays a default audio file. |
| If |duration_seconds|=None, plays audio file in its entirety. |
| |
| @param duration_seconds: Duration to play sound. |
| @param audio_file_path: Path to the audio file. |
| ''' |
| if not audio_file_path: |
| audio_file_path = '/usr/local/autotest/cros/audio/sine440.wav' |
| duration_arg = ('-d %d' % duration_seconds) if duration_seconds else '' |
| utils.system('aplay %s %s' % (duration_arg, audio_file_path)) |
| |
| def get_play_sine_args(channel, odev='default', freq=1000, duration=10, |
| sample_size=16): |
| '''Gets the command args to generate a sine wav to play to odev. |
| |
| @param channel: 0 for left, 1 for right; otherwize, mono. |
| @param odev: alsa output device. |
| @param freq: frequency of the generated sine tone. |
| @param duration: duration of the generated sine tone. |
| @param sample_size: output audio sample size. Default to 16. |
| ''' |
| cmdargs = [SOX_PATH, '-b', str(sample_size), '-n', '-t', 'alsa', |
| odev, 'synth', str(duration)] |
| if channel == 0: |
| cmdargs += ['sine', str(freq), 'sine', '0'] |
| elif channel == 1: |
| cmdargs += ['sine', '0', 'sine', str(freq)] |
| else: |
| cmdargs += ['sine', str(freq)] |
| |
| return cmdargs |
| |
| def play_sine(channel, odev='default', freq=1000, duration=10, |
| sample_size=16): |
| '''Generates a sine wave and plays to odev. |
| |
| @param channel: 0 for left, 1 for right; otherwize, mono. |
| @param odev: alsa output device. |
| @param freq: frequency of the generated sine tone. |
| @param duration: duration of the generated sine tone. |
| @param sample_size: output audio sample size. Default to 16. |
| ''' |
| cmdargs = get_play_sine_args(channel, odev, freq, duration, sample_size) |
| utils.system(' '.join(cmdargs)) |
| |
| # Functions to compose customized sox command, execute it and process the |
| # output of sox command. |
| def get_sox_mixer_cmd(infile, channel, |
| num_channels=_DEFAULT_NUM_CHANNELS, |
| sox_format=_DEFAULT_SOX_FORMAT): |
| '''Gets sox mixer command to reduce channel. |
| |
| @param infile: Input file name. |
| @param channel: The selected channel to take effect. |
| @param num_channels: The number of total channels to test. |
| @param sox_format: Format to generate sox command. |
| ''' |
| # Build up a pan value string for the sox command. |
| if channel == 0: |
| pan_values = '1' |
| else: |
| pan_values = '0' |
| for pan_index in range(1, num_channels): |
| if channel == pan_index: |
| pan_values = '%s%s' % (pan_values, ',1') |
| else: |
| pan_values = '%s%s' % (pan_values, ',0') |
| |
| return '%s -c 2 %s %s -c 1 %s - mixer %s' % (SOX_PATH, |
| sox_format, infile, sox_format, pan_values) |
| |
| def sox_stat_output(infile, channel, |
| num_channels=_DEFAULT_NUM_CHANNELS, |
| sox_format=_DEFAULT_SOX_FORMAT): |
| '''Executes sox stat command. |
| |
| @param infile: Input file name. |
| @param channel: The selected channel. |
| @param num_channels: The number of total channels to test. |
| @param sox_format: Format to generate sox command. |
| |
| @return The output of sox stat command |
| ''' |
| sox_mixer_cmd = get_sox_mixer_cmd(infile, channel, |
| num_channels, sox_format) |
| stat_cmd = '%s -c 1 %s - -n stat 2>&1' % (SOX_PATH, sox_format) |
| sox_cmd = '%s | %s' % (sox_mixer_cmd, stat_cmd) |
| return utils.system_output(sox_cmd, retain_output=True) |
| |
| def get_audio_rms(sox_output): |
| '''Gets the audio RMS value from sox stat output |
| |
| @param sox_output: Output of sox stat command. |
| |
| @return The RMS value parsed from sox stat output. |
| ''' |
| for rms_line in sox_output.split('\n'): |
| m = _SOX_RMS_AMPLITUDE_RE.match(rms_line) |
| if m is not None: |
| return float(m.group(1)) |
| |
| def get_rough_freq(sox_output): |
| '''Gets the rough audio frequency from sox stat output |
| |
| @param sox_output: Output of sox stat command. |
| |
| @return The rough frequency value parsed from sox stat output. |
| ''' |
| for rms_line in sox_output.split('\n'): |
| m = _SOX_ROUGH_FREQ_RE.match(rms_line) |
| if m is not None: |
| return int(m.group(1)) |
| |
| def check_audio_rms(sox_output, sox_threshold=_DEFAULT_SOX_RMS_THRESHOLD): |
| """Checks if the calculated RMS value is expected. |
| |
| @param sox_output: The output from sox stat command. |
| @param sox_threshold: The threshold to test RMS value against. |
| |
| @raises error.TestError if RMS amplitude can't be parsed. |
| @raises error.TestFail if the RMS amplitude of the recording isn't above |
| the threshold. |
| """ |
| rms_val = get_audio_rms(sox_output) |
| |
| # In case we don't get a valid RMS value. |
| if rms_val is None: |
| raise error.TestError( |
| 'Failed to generate an audio RMS value from playback.') |
| |
| logging.info('Got audio RMS value of %f. Minimum pass is %f.', |
| rms_val, sox_threshold) |
| if rms_val < sox_threshold: |
| raise error.TestFail( |
| 'Audio RMS value %f too low. Minimum pass is %f.' % |
| (rms_val, sox_threshold)) |
| |
| def noise_reduce_file(in_file, noise_file, out_file, |
| sox_format=_DEFAULT_SOX_FORMAT): |
| '''Runs the sox command to noise-reduce in_file using |
| the noise profile from noise_file. |
| |
| @param in_file: The file to noise reduce. |
| @param noise_file: The file containing the noise profile. |
| This can be created by recording silence. |
| @param out_file: The file contains the noise reduced sound. |
| @param sox_format: The sox format to generate sox command. |
| ''' |
| prof_cmd = '%s -c 2 %s %s -n noiseprof' % (SOX_PATH, |
| sox_format, noise_file) |
| reduce_cmd = ('%s -c 2 %s %s -c 2 %s %s noisered' % |
| (SOX_PATH, sox_format, in_file, sox_format, out_file)) |
| utils.system('%s | %s' % (prof_cmd, reduce_cmd)) |
| |
| def record_sample(tmpfile, record_command=_DEFAULT_REC_COMMAND): |
| '''Records a sample from the default input device. |
| |
| @param tmpfile: The file to record to. |
| @param record_command: The command to record audio. |
| ''' |
| utils.system('%s %s' % (record_command, tmpfile)) |
| |
| def create_wav_file(wav_dir, prefix=""): |
| '''Creates a unique name for wav file. |
| |
| The created file name will be preserved in autotest result directory |
| for future analysis. |
| |
| @param prefix: specified file name prefix. |
| ''' |
| filename = "%s-%s.wav" % (prefix, time.time()) |
| return os.path.join(wav_dir, filename) |
| |
| def run_in_parallel(*funs): |
| threads = [] |
| for f in funs: |
| t = threading.Thread(target=f) |
| t.start() |
| threads.append(t) |
| |
| for t in threads: |
| t.join() |
| |
| def loopback_test_channels(noise_file_name, wav_dir, |
| playback_callback=None, |
| check_recorded_callback=check_audio_rms, |
| preserve_test_file=True, |
| num_channels = _DEFAULT_NUM_CHANNELS, |
| record_callback=record_sample, |
| mix_callback=None): |
| '''Tests loopback on all channels. |
| |
| @param noise_file_name: Name of the file contains pre-recorded noise. |
| @param playback_callback: The callback to do the playback for |
| one channel. |
| @param record_callback: The callback to do the recording. |
| @param check_recorded_callback: The callback to check recorded file. |
| @param preserve_test_file: Retain the recorded files for future debugging. |
| ''' |
| for channel in xrange(num_channels): |
| record_file_name = create_wav_file(wav_dir, |
| "record-%d" % channel) |
| functions = [lambda: record_callback(record_file_name)] |
| |
| if playback_callback: |
| functions.append(lambda: playback_callback(channel)) |
| |
| if mix_callback: |
| mix_file_name = create_wav_file(wav_dir, "mix-%d" % channel) |
| functions.append(lambda: mix_callback(mix_file_name)) |
| |
| run_in_parallel(*functions) |
| |
| if mix_callback: |
| sox_output_mix = sox_stat_output(mix_file_name, channel) |
| rms_val_mix = get_audio_rms(sox_output_mix) |
| logging.info('Got mixed audio RMS value of %f.', rms_val_mix) |
| |
| sox_output_record = sox_stat_output(record_file_name, channel) |
| rms_val_record = get_audio_rms(sox_output_record) |
| logging.info('Got recorded audio RMS value of %f.', rms_val_record) |
| |
| reduced_file_name = create_wav_file(wav_dir, |
| "reduced-%d" % channel) |
| noise_reduce_file(record_file_name, noise_file_name, |
| reduced_file_name) |
| |
| sox_output_reduced = sox_stat_output(reduced_file_name, channel) |
| |
| if not preserve_test_file: |
| os.unlink(reduced_file_name) |
| os.unlink(record_file_name) |
| if mix_callback: |
| os.unlink(mix_file_name) |
| |
| check_recorded_callback(sox_output_reduced) |
| |
| |
| def get_channel_sox_stat( |
| input_audio, channel_index, channels=2, bits=16, rate=48000): |
| """Gets the sox stat info of the selected channel in the input audio file. |
| |
| @param input_audio: The input audio file to be analyzed. |
| @param channel_index: The index of the channel to be analyzed. |
| (1 for the first channel). |
| @param channels: The number of channels in the input audio. |
| @param bits: The number of bits of each audio sample. |
| @param rate: The sampling rate. |
| """ |
| if channel_index <= 0 or channel_index > channels: |
| raise ValueError('incorrect channel_indexi: %d' % channel_index) |
| |
| if channels == 1: |
| return sox_utils.get_stat( |
| input_audio, channels=channels, bits=bits, rate=rate) |
| |
| p1 = cmd_utils.popen( |
| sox_utils.extract_channel_cmd( |
| input_audio, '-', channel_index, |
| channels=channels, bits=bits, rate=rate), |
| stdout=cmd_utils.PIPE) |
| p2 = cmd_utils.popen( |
| sox_utils.stat_cmd('-', channels=1, bits=bits, rate=rate), |
| stdin=p1.stdout, stderr=cmd_utils.PIPE) |
| stat_output = p2.stderr.read() |
| cmd_utils.wait_and_check_returncode(p1, p2) |
| return sox_utils.parse_stat_output(stat_output) |
| |
| |
| def get_rms(input_audio, channels=1, bits=16, rate=48000): |
| """Gets the RMS values of all channels of the input audio. |
| |
| @param input_audio: The input audio file to be checked. |
| @param channels: The number of channels in the input audio. |
| @param bits: The number of bits of each audio sample. |
| @param rate: The sampling rate. |
| """ |
| stats = [get_channel_sox_stat( |
| input_audio, i + 1, channels=channels, bits=bits, |
| rate=rate) for i in xrange(channels)] |
| |
| logging.info('sox stat: %s', [str(s) for s in stats]) |
| return [s.rms for s in stats] |
| |
| |
| def reduce_noise_and_get_rms( |
| input_audio, noise_file, channels=1, bits=16, rate=48000): |
| """Reduces noise in the input audio by the given noise file and then gets |
| the RMS values of all channels of the input audio. |
| |
| @param input_audio: The input audio file to be analyzed. |
| @param noise_file: The noise file used to reduce noise in the input audio. |
| @param channels: The number of channels in the input audio. |
| @param bits: The number of bits of each audio sample. |
| @param rate: The sampling rate. |
| """ |
| with tempfile.NamedTemporaryFile() as reduced_file: |
| p1 = cmd_utils.popen( |
| sox_utils.noise_profile_cmd( |
| noise_file, '-', channels=channels, bits=bits, |
| rate=rate), |
| stdout=cmd_utils.PIPE) |
| p2 = cmd_utils.popen( |
| sox_utils.noise_reduce_cmd( |
| input_audio, reduced_file.name, '-', |
| channels=channels, bits=bits, rate=rate), |
| stdin=p1.stdout) |
| cmd_utils.wait_and_check_returncode(p1, p2) |
| return get_rms(reduced_file.name, channels, bits, rate) |
| |
| |
| def skip_devices_to_test(*boards): |
| """Devices to skip due to hardware or test compatibility issues.""" |
| # TODO(scottz): Remove this when crbug.com/220147 is fixed. |
| dut_board = utils.get_current_board() |
| if dut_board in boards: |
| raise error.TestNAError('This test is not available on %s' % dut_board) |
| |
| |
| def cras_rms_test_setup(): |
| """ Setups for the cras_rms_tests. |
| |
| To make sure the line_out-to-mic_in path is all green. |
| """ |
| # TODO(owenlin): Now, the nodes are choosed by chrome. |
| # We should do it here. |
| output_node, _ = cras_utils.get_selected_nodes() |
| |
| cras_utils.set_system_volume(_DEFAULT_PLAYBACK_VOLUME) |
| cras_utils.set_node_volume(output_node, _DEFAULT_PLAYBACK_VOLUME) |
| |
| cras_utils.set_capture_gain(_DEFAULT_CAPTURE_GAIN) |
| |
| cras_utils.set_system_mute(False) |
| cras_utils.set_capture_mute(False) |
| |
| |
| def generate_rms_postmortem(): |
| try: |
| logging.info('audio postmortem report') |
| log_loopback_dongle_status() |
| logging.info(cmd_utils.execute( |
| [_AUDIO_DIAGNOSTICS_PATH], stdout=cmd_utils.PIPE)) |
| except Exception: |
| logging.exception('Error while generating postmortem report') |
| |
| |
| def get_max_cross_correlation(signal_a, signal_b): |
| """Gets max cross-correlation and best time delay of two signals. |
| |
| Computes cross-correlation function between two |
| signals and gets the maximum value and time delay. |
| The steps includes: |
| 1. Compute cross-correlation function of X and Y and get Cxy. |
| The correlation function Cxy is an array where Cxy[k] is the |
| cross product of X and Y when Y is delayed by k. |
| Refer to manual of numpy.correlate for detail of correlation. |
| 2. Find the maximum value C_max and index C_index in Cxy. |
| 3. Compute L2 norm of X and Y to get norm(X) and norm(Y). |
| 4. Divide C_max by norm(X)*norm(Y) to get max cross-correlation. |
| |
| Max cross-correlation indicates the similarity of X and Y. The value |
| is 1 if X equals Y multiplied by a positive scalar. |
| The value is -1 if X equals Y multiplied by a negative scaler. |
| Any constant level shift will be regarded as distortion and will make |
| max cross-correlation value deviated from 1. |
| C_index is the best time delay of Y that make Y looks similar to X. |
| Refer to http://en.wikipedia.org/wiki/Cross-correlation. |
| |
| @param signal_a: A list of numbers which contains the first signal. |
| @param signal_b: A list of numbers which contains the second signal. |
| |
| @raises: ValueError if any number in signal_a or signal_b is not a float. |
| ValueError if norm of any array is less than _MINIMUM_NORM. |
| |
| @returns: A tuple (correlation index, best delay). If there are more than |
| one best delay, just return the first one. |
| """ |
| def check_list_contains_float(numbers): |
| """Checks the elements in a list are all float. |
| |
| @param numbers: A list of numbers. |
| |
| @raises: ValueError if there is any element which is not a float |
| in the list. |
| """ |
| if any(not isinstance(x, float) for x in numbers): |
| raise ValueError('List contains number which is not a float') |
| |
| check_list_contains_float(signal_a) |
| check_list_contains_float(signal_b) |
| |
| norm_a = numpy.linalg.norm(signal_a) |
| norm_b = numpy.linalg.norm(signal_b) |
| logging.debug('norm_a: %f', norm_a) |
| logging.debug('norm_b: %f', norm_b) |
| if norm_a <= _MINIMUM_NORM or norm_b <= _MINIMUM_NORM: |
| raise ValueError('No meaningful data as norm is too small.') |
| |
| correlation = numpy.correlate(signal_a, signal_b, 'full') |
| max_correlation = max(correlation) |
| best_delays = [i for i, j in enumerate(correlation) if j == max_correlation] |
| if len(best_delays) > 1: |
| logging.warning('There are more than one best delay: %r', best_delays) |
| return max_correlation / (norm_a * norm_b), best_delays[0] |
| |
| |
| def trim_data(data, threshold=0): |
| """Trims a data by removing value that is too small in head and tail. |
| |
| Removes elements in head and tail whose absolute value is smaller than |
| or equal to threshold. |
| E.g. trim_data([0.0, 0.1, 0.2, 0.3, 0.2, 0.1, 0.0], 0.2) = |
| ([0.2, 0.3, 0.2], 2) |
| |
| @param data: A list of numbers. |
| @param threshold: The threshold to compare against. |
| |
| @returns: A tuple (trimmed_data, valid_index), where valid_index is the |
| original index of the starting element in trimmed_data. |
| Returns ([], None) if there is no valid data. |
| """ |
| indice_valid = [ |
| i for i, j in enumerate(data) if abs(j) > threshold] |
| if not indice_valid: |
| logging.warning( |
| 'There is no element with absolute value greater ' |
| 'than threshold %f', threshold) |
| return [], None |
| logging.debug('Start and end of indice_valid: %d, %d', |
| indice_valid[0], indice_valid[-1]) |
| return data[indice_valid[0] : indice_valid[-1] + 1], indice_valid[0] |
| |
| |
| def get_one_channel_correlation(test_data, golden_data): |
| """Gets max cross-correlation of test_data and golden_data. |
| |
| Trims test data and compute the max cross-correlation against golden_data. |
| Signal can be trimmed because those zero values in the head and tail of |
| a signal will not affect correlation computation. |
| |
| @param test_data: A list containing the data to compare against golden data. |
| @param golden_data: A list containing the golden data. |
| |
| @returns: A tuple (max cross-correlation, best_delay) if data is valid. |
| Otherwise returns (None, None). Refer to docstring of |
| get_max_cross_correlation. |
| """ |
| trimmed_test_data, start_trimmed_length = trim_data(test_data) |
| |
| def to_float(samples): |
| """Casts elements in the list to float. |
| |
| @param samples: A list of numbers. |
| |
| @returns: A list of original numbers casted to float. |
| """ |
| samples_float = [float(x) for x in samples] |
| return samples_float |
| |
| max_cross_correlation, best_delay = get_max_cross_correlation( |
| to_float(golden_data), |
| to_float(trimmed_test_data)) |
| |
| # Adds back the trimmed length in the head. |
| if max_cross_correlation: |
| return max_cross_correlation, best_delay + start_trimmed_length |
| else: |
| return None, None |
| |
| |
| def compare_one_channel_correlation(test_data, golden_data): |
| """Compares two one-channel data by correlation. |
| |
| @param test_data: A list containing the data to compare against golden data. |
| @param golden_data: A list containing the golden data. |
| |
| @returns: A dict containing: |
| index: The index of similarity where 1 means they are different |
| only by a positive scale. |
| best_delay: The best delay of test data in relative to golden |
| data. |
| equal: A bool containing comparing result. |
| """ |
| result_dict = dict() |
| max_cross_correlation, best_delay = get_one_channel_correlation( |
| test_data, golden_data) |
| result_dict['index'] = max_cross_correlation |
| result_dict['best_delay'] = best_delay |
| result_dict['equal'] = True if ( |
| max_cross_correlation and |
| max_cross_correlation > _CORRELATION_INDEX_THRESHOLD) else False |
| logging.debug('result_dict: %r', result_dict) |
| return result_dict |
| |
| |
| def get_one_channel_stat(data, data_format): |
| """Gets statistic information of data. |
| |
| @param data: A list containing one channel data. |
| @param data_format: A dict containing data format of data. |
| |
| @return: The sox stat parsed result. An object containing |
| sameple_count: An int. Samples read. |
| length: A float. Length in seconds. |
| rms: A float. RMS amplitude. |
| rough_frequency: A float. Rough frequency. |
| """ |
| if not data: |
| raise ValueError('Data is empty. Can not get stat') |
| raw_data = audio_data.AudioRawData( |
| binary=None, channel=1, |
| sample_format=data_format['sample_format']) |
| raw_data.copy_channel_data([data]) |
| raw_data_path = '/tmp/one_channel.raw' |
| raw_data.write_to_file(raw_data_path) |
| |
| bits = 8 * (audio_data.SAMPLE_FORMATS[ |
| data_format['sample_format']]['size_bytes']) |
| stat = sox_utils.get_stat(raw_data_path, channels=1, bits=bits, |
| rate=data_format['rate']) |
| os.unlink(raw_data_path) |
| return stat |
| |
| |
| def compare_one_channel_frequency(test_data, test_data_format, |
| golden_data, golden_data_format): |
| """Compares two one-channel data by frequency. |
| |
| @param test_data: A list containing the data to compare against golden data. |
| @param test_data_format: A dict containing data format of test data. |
| @param golden_data: A list containing the golden data. |
| @param golden_data_format: A dict containing data format of golden data. |
| |
| @returns: A dict containing: |
| test_data_frequency: test data frequency. |
| golden_data_frequency: golden data frequency. |
| equal: A bool containing comparing result. |
| |
| """ |
| result_dict = dict() |
| golden_data_stat = get_one_channel_stat(golden_data, golden_data_format) |
| logging.info('Get golden data one channel stat: %s', golden_data_stat) |
| test_data_stat = get_one_channel_stat(test_data, test_data_format) |
| logging.info('Get test data one channel stat: %s', test_data_stat) |
| |
| result_dict['golden_data_frequency'] = golden_data_stat.rough_frequency |
| result_dict['test_data_frequency'] = test_data_stat.rough_frequency |
| result_dict['equal'] = True if ( |
| abs(result_dict['test_data_frequency'] - |
| result_dict['golden_data_frequency']) < _FREQUENCY_DIFF_THRESHOLD |
| ) else False |
| if test_data_stat.rms < _MEANINGFUL_RMS_THRESHOLD: |
| logging.error('Recorded RMS %f is too small to be meaningful.', |
| test_data_stat.rms) |
| result_dict['equal'] = False |
| logging.debug('result_dict: %r', result_dict) |
| return result_dict |
| |
| |
| def compare_one_channel_data(test_data, test_data_format, |
| golden_data, golden_data_format, method): |
| """Compares two one-channel data. |
| |
| @param test_data: A list containing the data to compare against golden data. |
| @param test_data_format: The data format of test data. |
| @param golden_data: A list containing the golden data. |
| @param golden_data_format: The data format of golden data. |
| @param method: The comparing method. Currently only 'correlation' is |
| supported. |
| |
| @returns: A dict containing: |
| index: The index of similarity where 1 means they are different |
| only by a positive scale. |
| best_delay: The best delay of test data in relative to golden |
| data. |
| equal: A bool containing comparing result. |
| |
| @raises: NotImplementedError if method is not supported. |
| """ |
| if method == 'correlation': |
| return compare_one_channel_correlation(test_data, golden_data) |
| if method == 'frequency': |
| return compare_one_channel_frequency( |
| test_data, test_data_format, golden_data, golden_data_format) |
| raise NotImplementedError('method %s is not implemented' % method) |
| |
| |
| def compare_data(golden_data_binary, golden_data_format, |
| test_data_binary, test_data_format, |
| channel_map, method): |
| """Compares two raw data. |
| |
| @param golden_data_binary: The binary containing golden data. |
| @param golden_data_format: The data format of golden data. |
| @param test_data_binary: The binary containing test data. |
| @param test_data_format: The data format of test data. |
| @param channel_map: A list containing channel mapping. |
| E.g. [1, 0, None, None, None, None, None, None] means |
| channel 0 of test data should map to channel 1 of |
| golden data. Channel 1 of test data should map to |
| channel 0 of golden data. Channel 2 to 7 of test data |
| should be skipped. |
| @param method: The method to compare data. Use 'correlation' to compare |
| general data. Use 'frequency' to compare data containing |
| sine wave. |
| |
| @returns: A boolean for compare result. |
| |
| @raises: NotImplementedError if file type is not raw. |
| NotImplementedError if sampling rates of two data are not the same. |
| """ |
| if (golden_data_format['file_type'] != 'raw' or |
| test_data_format['file_type'] != 'raw'): |
| raise NotImplementedError('Only support raw data in compare_data.') |
| if (golden_data_format['rate'] != test_data_format['rate']): |
| raise NotImplementedError( |
| 'Only support comparing data with the same sampling rate') |
| golden_data = audio_data.AudioRawData( |
| binary=golden_data_binary, |
| channel=golden_data_format['channel'], |
| sample_format=golden_data_format['sample_format']) |
| test_data = audio_data.AudioRawData( |
| binary=test_data_binary, |
| channel=test_data_format['channel'], |
| sample_format=test_data_format['sample_format']) |
| compare_results = [] |
| for test_channel, golden_channel in enumerate(channel_map): |
| if golden_channel is None: |
| logging.info('Skipped channel %d', test_channel) |
| continue |
| test_data_one_channel = test_data.channel_data[test_channel] |
| golden_data_one_channel = golden_data.channel_data[golden_channel] |
| result_dict = dict(test_channel=test_channel, |
| golden_channel=golden_channel) |
| result_dict.update( |
| compare_one_channel_data( |
| test_data_one_channel, test_data_format, |
| golden_data_one_channel, golden_data_format, method)) |
| compare_results.append(result_dict) |
| logging.info('compare_results: %r', compare_results) |
| return_value = False if not compare_results else True |
| for result in compare_results: |
| if not result['equal']: |
| logging.error( |
| 'Failed on test channel %d and golden channel %d', |
| result['test_channel'], result['golden_channel']) |
| return_value = False |
| # Also checks best delay are exactly the same. |
| if method == 'correlation': |
| best_delays = set([result['best_delay'] for result in compare_results]) |
| if len(best_delays) > 1: |
| logging.error('There are more than one best delay.') |
| return_value = False |
| return return_value |
| |
| |
| class _base_rms_test(test.test): |
| """ Base class for all rms_test """ |
| |
| def postprocess(self): |
| super(_base_rms_test, self).postprocess() |
| |
| # Sum up the number of failed constraints in each iteration |
| if sum(len(x) for x in self.failed_constraints): |
| generate_rms_postmortem() |
| |
| |
| class chrome_rms_test(_base_rms_test): |
| """ Base test class for audio RMS test with Chrome. |
| |
| The chrome instance can be accessed by self.chrome. |
| """ |
| def warmup(self): |
| skip_devices_to_test('x86-mario') |
| super(chrome_rms_test, self).warmup() |
| |
| # Not all client of this file using telemetry. |
| # Just do the import here for those who really need it. |
| from autotest_lib.client.common_lib.cros import chrome |
| |
| self.chrome = chrome.Chrome() |
| |
| # The audio configuration could be changed when we |
| # restart chrome. |
| try: |
| cras_rms_test_setup() |
| except Exception: |
| self.chrome.browser.Close() |
| raise |
| |
| |
| def cleanup(self, *args): |
| try: |
| self.chrome.browser.Close() |
| finally: |
| super(chrome_rms_test, self).cleanup() |
| |
| class cras_rms_test(_base_rms_test): |
| """ Base test class for CRAS audio RMS test.""" |
| |
| def warmup(self): |
| skip_devices_to_test('x86-mario') |
| super(cras_rms_test, self).warmup() |
| cras_rms_test_setup() |
| |
| |
| class alsa_rms_test(_base_rms_test): |
| """ Base test class for ALSA audio RMS test.""" |
| |
| def warmup(self): |
| skip_devices_to_test('x86-mario') |
| super(alsa_rms_test, self).warmup() |
| |
| # TODO(owenlin): Don't use CRAS for setup. |
| cras_rms_test_setup() |
| |
| # CRAS does not apply the volume and capture gain to ALSA util |
| # streams are added. Do that to ensure the values have been set. |
| cras_utils.playback('/dev/zero', duration=0.1) |
| cras_utils.capture('/dev/null', duration=0.1) |
