# Copyright 2016 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import json
import logging
import os
import time

import common
from autotest_lib.client.common_lib import error
from autotest_lib.client.common_lib import global_config
from autotest_lib.client.common_lib import hosts
from autotest_lib.client.common_lib.cros import dev_server
from autotest_lib.client.common_lib.cros import retry
from autotest_lib.server import afe_utils
from autotest_lib.server import crashcollect
from autotest_lib.server.cros import autoupdater
from autotest_lib.server.cros.dynamic_suite import tools
from autotest_lib.server.hosts import cros_firmware
from autotest_lib.server.hosts import repair_utils

# _DEV_MODE_ALLOW_POOLS - The set of pools that are allowed to be
# in dev mode (usually, those should be unmanaged devices)
#
_DEV_MODE_ALLOWED_POOLS = set(
    global_config.global_config.get_config_value(
            'CROS',
            'pools_dev_mode_allowed',
            type=str,
            default='',
            allow_blank=True).split(','))

# Setting to suppress dev mode check; primarily used for moblab where all
# DUT's are in dev mode.
_DEV_MODE_ALWAYS_ALLOWED = global_config.global_config.get_config_value(
            'CROS',
            'dev_mode_allowed',
            type=bool,
            default=False)

# Triggers for the 'au', 'powerwash', and 'usb' repair actions.
# These are also used as dependencies in the `CrosHost` repair
# sequence, as follows:
#
# au:
#   - triggers: _CROS_AU_TRIGGERS
#   - depends on: _CROS_USB_TRIGGERS + _CROS_POWERWASH_TRIGGERS
#
# powerwash:
#   - triggers: _CROS_POWERWASH_TRIGGERS + _CROS_AU_TRIGGERS
#   - depends on: _CROS_USB_TRIGGERS
#
# usb:
#   - triggers: _CROS_USB_TRIGGERS + _CROS_POWERWASH_TRIGGERS +
#               _CROS_AU_TRIGGERS
#   - no dependencies
#
# N.B. AC power detection depends on software on the DUT, and there
# have been bugs where detection failed even though the DUT really
# did have power.  So, we make the 'power' verifier a trigger for
# reinstall repair actions, too.
#
# TODO(jrbarnette):  AU repair can't fix all problems reported by
# the 'cros' verifier; it's listed as an AU trigger as a
# simplification.  The ultimate fix is to split the 'cros' verifier
# into smaller individual verifiers.
_CROS_AU_TRIGGERS = ('power', 'rwfw', 'python', 'cros',)
_CROS_POWERWASH_TRIGGERS = ('tpm', 'good_au', 'ext4',)
_CROS_USB_TRIGGERS = ('ssh', 'writable',)


class ACPowerVerifier(hosts.Verifier):
    """Check for AC power and a reasonable battery charge."""

    def verify(self, host):
        # pylint: disable=missing-docstring
        try:
            info = host.get_power_supply_info()
        except error.AutoservRunError:
            raise hosts.AutoservVerifyError(
                    'Failed to get power supply info')

        try:
            if info['Line Power']['online'] != 'yes':
                raise hosts.AutoservVerifyError(
                        'AC power is not plugged in')
        except KeyError:
            raise hosts.AutoservVerifyError(
                    'Cannot determine AC power status')

        try:
            if float(info['Battery']['percentage']) < 50.0:
                raise hosts.AutoservVerifyError(
                        'Battery is less than 50%')
        except KeyError:
            logging.info('Cannot determine battery status - '
                         'skipping check.')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The DUT is plugged in to AC power'


class WritableVerifier(hosts.Verifier):
    """
    Confirm the stateful file systems are writable.

    The standard linux response to certain unexpected file system errors
    (including hardware errors in block devices) is to change the file
    system status to read-only.  This checks that that hasn't happened.

    The test covers the two file systems that need to be writable for
    critical operations like AU:
      * The (unencrypted) stateful system which includes
        /mnt/stateful_partition.
      * The encrypted stateful partition, which includes /var.

    The test doesn't check various bind mounts; those are expected to
    fail the same way as their underlying main mounts.  Whether the
    Linux kernel can guarantee that is untested...
    """

    # N.B. Order matters here:  Encrypted stateful is loop-mounted from
    # a file in unencrypted stateful, so we don't test for errors in
    # encrypted stateful if unencrypted fails.
    _TEST_DIRECTORIES = ['/mnt/stateful_partition', '/var/tmp']

    def verify(self, host):
        # pylint: disable=missing-docstring
        # This deliberately stops looking after the first error.
        # See above for the details.
        for testdir in self._TEST_DIRECTORIES:
            filename = os.path.join(testdir, 'writable_test')
            command = 'touch %s && rm %s' % (filename, filename)
            rv = host.run(command=command, ignore_status=True)
            if rv.exit_status != 0:
                msg = 'Can\'t create a file in %s' % testdir
                raise hosts.AutoservVerifyError(msg)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The stateful filesystems are writable'


class EXT4fsErrorVerifier(hosts.Verifier):
    """
    Confirm we have not seen critical file system kernel errors.
    """
    def verify(self, host):
        # pylint: disable=missing-docstring
        # grep for stateful FS errors of the type "EXT4-fs error (device sda1):"
        command = ("dmesg | grep -E \"EXT4-fs error \(device "
                   "$(cut -d ' ' -f 5,9 /proc/$$/mountinfo | "
                   "grep -e '^/mnt/stateful_partition ' | "
                   "cut -d ' ' -f 2 | cut -d '/' -f 3)\):\"")
        output = host.run(command=command, ignore_status=True).stdout
        if output:
            sample = output.splitlines()[0]
            message = 'Saw file system error: %s' % sample
            raise hosts.AutoservVerifyError(message)
        # Check for other critical FS errors.
        command = 'dmesg | grep "This should not happen!!  Data will be lost"'
        output = host.run(command=command, ignore_status=True).stdout
        if output:
            message = 'Saw file system error: Data will be lost'
            raise hosts.AutoservVerifyError(message)
        else:
            logging.error('Could not determine stateful mount.')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Did not find critical file system errors'


class UpdateSuccessVerifier(hosts.Verifier):
    """
    Checks that the DUT successfully finished its last provision job.

    At the start of any update (e.g. for a Provision job), the code
    creates a marker file named `PROVISION_FAILED`.  The file is located
    in a part of the stateful partition that will be removed if an
    update finishes successfully.  Thus, the presence of the file
    indicates that a prior update failed.

    The verifier tests for the existence of the marker file and fails if
    it still exists.
    """
    def verify(self, host):
        # pylint: disable=missing-docstring
        result = host.run('test -f %s' % autoupdater.PROVISION_FAILED,
                          ignore_status=True)
        if result.exit_status == 0:
            raise hosts.AutoservVerifyError(
                    'Last AU on this DUT failed')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The most recent AU attempt on this DUT succeeded'


class TPMStatusVerifier(hosts.Verifier):
    """Verify that the host's TPM is in a good state."""

    def verify(self, host):
        # pylint: disable=missing-docstring
        if _is_virtual_machine(host):
            # We do not forward host TPM / emulated TPM to qemu VMs, so skip
            # this verification step.
            logging.debug('Skipped verification %s on VM', self)
            return

        try:
            status = CryptohomeStatus(host)
        except hosts.AutoservVerifyError:
            logging.info('Cannot determine the Cryptohome valid status - '
                         'skipping check.')
            return
        try:
            tpm = status['tpm']
            if not tpm['enabled']:
                raise hosts.AutoservVerifyError(
                        'TPM is not enabled -- Hardware is not working.')
            if not tpm['can_connect']:
                raise hosts.AutoservVerifyError(
                        ('TPM connect failed -- '
                         'last_error=%d.' % tpm['last_error']))
            if tpm['owned'] and not tpm['can_load_srk']:
                raise hosts.AutoservVerifyError(
                        'Cannot load the TPM SRK')
            if tpm['can_load_srk'] and not tpm['can_load_srk_pubkey']:
                raise hosts.AutoservVerifyError(
                        'Cannot load the TPM SRK public key')
        except KeyError:
            logging.info('Cannot determine the Crytohome valid status - '
                         'skipping check.')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The host\'s TPM is available and working'


class PythonVerifier(hosts.Verifier):
    """Confirm the presence of a working Python interpreter."""

    def verify(self, host):
        # pylint: disable=missing-docstring
        result = host.run('python -c "import cPickle"',
                          ignore_status=True)
        if result.exit_status != 0:
            message = 'The python interpreter is broken'
            if result.exit_status == 127:
                search = host.run('which python', ignore_status=True)
                if search.exit_status != 0 or not search.stdout:
                    message = ('Python is missing; may be caused by '
                               'powerwash')
            raise hosts.AutoservVerifyError(message)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Python on the host is installed and working'


class DevModeVerifier(hosts.Verifier):
    """Verify that the host is not in dev mode."""

    def verify(self, host):
        # pylint: disable=missing-docstring
        # Some pools are allowed to be in dev mode
        info = host.host_info_store.get()
        if (_DEV_MODE_ALWAYS_ALLOWED or
                bool(info.pools & _DEV_MODE_ALLOWED_POOLS)):
            return

        result = host.run('crossystem devsw_boot', ignore_status=True).stdout
        if result != '0':
            raise hosts.AutoservVerifyError('The host is in dev mode')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The host should not be in dev mode'


class HWIDVerifier(hosts.Verifier):
    """Verify that the host has HWID & serial number."""

    def verify(self, host):
        # pylint: disable=missing-docstring
        try:
            info = host.host_info_store.get()

            hwid = host.run('crossystem hwid', ignore_status=True).stdout
            if hwid:
                info.attributes['HWID'] = hwid

            serial_number = host.run('vpd -g serial_number',
                                     ignore_status=True).stdout
            if serial_number:
                info.attributes['serial_number'] = serial_number

            if info != host.host_info_store.get():
                host.host_info_store.commit(info)
        except Exception as e:
            logging.exception('Failed to get HWID & Serial Number for host ',
                              '%s: %s', host.hostname, str(e))

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'The host should have valid HWID and Serial Number'


class JetstreamTpmVerifier(hosts.Verifier):
    """Verify that Jetstream TPM is in a good state."""

    @retry.retry(error.AutoservError, timeout_min=2, delay_sec=10)
    def verify(self, host):
        # pylint: disable=missing-docstring
        try:
            status = CryptohomeStatus(host)
            if not status.tpm_enabled:
                raise hosts.AutoservVerifyError('TPM is not enabled')
            if not status.tpm_owned:
                raise hosts.AutoservVerifyError('TPM is not owned')
            if not status.tpm_can_load_srk:
                raise hosts.AutoservVerifyError('TPM cannot load SRK')
            if not status.tpm_can_load_srk_pubkey:
                raise hosts.AutoservVerifyError('TPM cannot load SRK pubkey')

            # Check that the TPM is fully initialized. The output of this
            # command is line-oriented property/value pairs.
            result = host.run('cryptohome --action=tpm_status')
            if 'TPM Ready: true' not in result.stdout:
                raise hosts.AutoservVerifyError('TPM is not ready')
        except error.AutoservRunError:
            raise hosts.AutoservVerifyError(
                    'Could not determine TPM status')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Jetstream TPM state check'


class JetstreamAttestationVerifier(hosts.Verifier):
    """Verify that Jetstream attestation client has a certificate."""

    @retry.retry(error.AutoservError, timeout_min=2, delay_sec=10)
    def verify(self, host):
        # pylint: disable=missing-docstring
        try:
            # This output is in text protobuf format.
            result = host.run('cryptohome --action=tpm_more_status')
            if 'attestation_prepared: true' not in result.stdout:
                raise hosts.AutoservVerifyError(
                        'Attestation has not been prepared')

            # This output is in text protobuf format.
            result = host.run('ap-attestation-client '
                              '--endpoint=get-endorsement-information')
            if 'ek_certificate' not in result.stdout:
                raise hosts.AutoservVerifyError(
                        'Endorsement certificate not found')
        except error.AutoservRunError:
            raise hosts.AutoservVerifyError(
                    'Unable to fetch endorsement certificate')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Jetstream attestation endorsement check'


class JetstreamServicesVerifier(hosts.Verifier):
    """Verify that Jetstream services are running."""

    # Retry for b/62576902
    @retry.retry(error.AutoservError, timeout_min=1, delay_sec=10)
    def verify(self, host):
        # pylint: disable=missing-docstring
        try:
            if not host.upstart_status('ap-controller'):
                raise hosts.AutoservVerifyError(
                    'ap-controller service is not running')
        except error.AutoservRunError:
            raise hosts.AutoservVerifyError(
                'ap-controller service not found')

        try:
            host.run('pgrep ap-controller')
        except error.AutoservRunError:
            raise hosts.AutoservVerifyError(
                'ap-controller process is not running')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Jetstream services must be running'


class KvmExistsVerifier(hosts.Verifier):
    """Verify that /dev/kvm exists if it should be there"""

    def verify(self, host):
        # pylint: disable=missing-docstring
        result = host.run('[ ! -e /dev/kvm -a -f /usr/bin/vm_concierge ]',
                          ignore_status=True)
        if result.exit_status == 0:
            raise hosts.AutoservVerifyError('/dev/kvm is missing')

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return '/dev/kvm should exist if device supports Linux VMs'


class _ResetRepairAction(hosts.RepairAction):
    """Common handling for repair actions that reset a DUT."""

    def _collect_logs(self, host):
        """Collect logs from a successfully repaired DUT."""
        dirname = 'after_%s' % self.tag
        local_log_dir = crashcollect.get_crashinfo_dir(host, dirname)
        host.collect_logs('/var/log', local_log_dir, ignore_errors=True)
        # Collect crash info.
        crashcollect.get_crashinfo(host, None)

    def _check_reset_success(self, host):
        """Check whether reset succeeded, and gather logs if possible."""
        if host.wait_up(host.BOOT_TIMEOUT):
            try:
                # Collect logs once we regain ssh access before
                # clobbering them.
                self._collect_logs(host)
            except Exception:
                # If the DUT is up, we want to declare success, even if
                # log gathering fails for some reason.  So, if there's
                # a failure, just log it and move on.
                logging.exception('Non-critical failure in log '
                                  'collection during %s.',
                                  self.tag)
            return
        raise hosts.AutoservRepairError(
                'Host %s is still offline after %s.' %
                (host.hostname, self.tag))


class ServoSysRqRepair(_ResetRepairAction):
    """
    Repair a Chrome device by sending a system request to the kernel.

    Sending 3 times the Alt+VolUp+x key combination (aka sysrq-x)
    will ask the kernel to panic itself and reboot while conserving
    the kernel logs in console ramoops.
    """

    def repair(self, host):
        # pylint: disable=missing-docstring
        repair_utils.require_servo(host)
        # Press 3 times Alt+VolUp+X
        # no checking DUT health between each press as
        # killing Chrome is not really likely to fix the DUT SSH.
        for _ in range(3):
            try:
                host.servo.sysrq_x()
            except error.TestFail, ex:
                raise hosts.AutoservRepairError(
                      'cannot press sysrq-x: %s.' % str(ex))
            # less than 5 seconds between presses.
            time.sleep(2.0)
        self._check_reset_success(host)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reset the DUT via keyboard sysrq-x'


class ServoResetRepair(_ResetRepairAction):
    """Repair a Chrome device by resetting it with servo."""

    def repair(self, host):
        # pylint: disable=missing-docstring
        repair_utils.require_servo(host)
        host.servo.get_power_state_controller().reset()
        self._check_reset_success(host)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reset the DUT via servo'


class CrosRebootRepair(repair_utils.RebootRepair):
    """Repair a CrOS target by clearing dev mode and rebooting it."""

    def repair(self, host):
        # pylint: disable=missing-docstring
        # N.B. We need to reboot regardless of whether clearing
        # dev_mode succeeds or fails.
        host.run('/usr/share/vboot/bin/set_gbb_flags.sh 0',
                 ignore_status=True)
        host.run('crossystem disable_dev_request=1',
                 ignore_status=True)
        super(CrosRebootRepair, self).repair(host)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reset GBB flags and Reboot the host'


class AutoUpdateRepair(hosts.RepairAction):
    """
    Repair by re-installing a test image using autoupdate.

    Try to install the DUT's designated "stable test image" using the
    standard procedure for installing a new test image via autoupdate.
    """

    def repair(self, host):
        # pylint: disable=missing-docstring
        image_name = host.get_cros_repair_image_name()
        logging.info('Staging build for AU: %s', image_name)
        devserver = dev_server.ImageServer.resolve(image_name, host.hostname)
        devserver.trigger_download(image_name, synchronous=False)
        update_url = tools.image_url_pattern() % (
                devserver.url(), image_name)
        afe_utils.machine_install_and_update_labels(host, update_url)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Re-install the stable build via AU'


class PowerWashRepair(AutoUpdateRepair):
    """
    Powerwash the DUT, then re-install using autoupdate.

    Powerwash the DUT, then attempt to re-install a stable test image as
    for `AutoUpdateRepair`.
    """

    def repair(self, host):
        # pylint: disable=missing-docstring
        host.run('echo "fast safe" > '
                 '/mnt/stateful_partition/factory_install_reset')
        host.reboot(timeout=host.POWERWASH_BOOT_TIMEOUT, wait=True)
        super(PowerWashRepair, self).repair(host)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Powerwash and then re-install the stable build via AU'


class ServoInstallRepair(hosts.RepairAction):
    """
    Reinstall a test image from USB using servo.

    Use servo to re-install the DUT's designated "stable test image"
    from servo-attached USB storage.
    """

    def repair(self, host):
        # pylint: disable=missing-docstring
        repair_utils.require_servo(host)
        host.servo_install(host.stage_image_for_servo())

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reinstall from USB using servo'


class ColdRebootRepair(_ResetRepairAction):
    """
    Repair a Chrome device by performing a cold reboot that resets the EC.

    Use ectool to perform a cold reboot which will reset the EC.
    """

    def repair(self, host):
        # pylint: disable=missing-docstring
        host.reboot(reboot_cmd='ectool reboot_ec cold')
        self._check_reset_success(host)

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reset the DUT via cold reboot with ectool'


class JetstreamTpmRepair(hosts.RepairAction):
    """Repair by resetting TPM and rebooting."""

    def repair(self, host):
        # pylint: disable=missing-docstring
        host.run('rm -f /var/cache/ap/setup-network', ignore_status=True)
        host.run('rm -f /home/chronos/.oobe_completed', ignore_status=True)
        host.run('rm -f /home/.shadow/.can_attempt_ownership',
                 ignore_status=True)
        host.run('crossystem clear_tpm_owner_request=1', ignore_status=True)
        host.reboot()

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Reset TPM and reboot'


class JetstreamServiceRepair(hosts.RepairAction):
    """Repair by restarting Jetstream services."""

    def repair(self, host):
        # pylint: disable=missing-docstring
        host.cleanup_services()

    @property
    def description(self):
        # pylint: disable=missing-docstring
        return 'Restart Jetstream services'


def _cros_verify_dag():
    """Return the verification DAG for a `CrosHost`."""
    FirmwareStatusVerifier = cros_firmware.FirmwareStatusVerifier
    FirmwareVersionVerifier = cros_firmware.FirmwareVersionVerifier
    verify_dag = (
        (repair_utils.SshVerifier,        'ssh',      ()),
        (DevModeVerifier,                 'devmode',  ('ssh',)),
        (HWIDVerifier,                    'hwid',     ('ssh',)),
        (ACPowerVerifier,                 'power',    ('ssh',)),
        (EXT4fsErrorVerifier,             'ext4',     ('ssh',)),
        (WritableVerifier,                'writable', ('ssh',)),
        (TPMStatusVerifier,               'tpm',      ('ssh',)),
        (UpdateSuccessVerifier,           'good_au',  ('ssh',)),
        (FirmwareStatusVerifier,          'fwstatus', ('ssh',)),
        (FirmwareVersionVerifier,         'rwfw',     ('ssh',)),
        (PythonVerifier,                  'python',   ('ssh',)),
        (repair_utils.LegacyHostVerifier, 'cros',     ('ssh',)),
        (KvmExistsVerifier,               'ec_reset', ('ssh',)),
    )
    return verify_dag


def _cros_basic_repair_actions():
    """Return the basic repair actions for a `CrosHost`"""
    FirmwareRepair = cros_firmware.FirmwareRepair
    repair_actions = (
        # RPM cycling must precede Servo reset:  if the DUT has a dead
        # battery, we need to reattach AC power before we reset via servo.
        (repair_utils.RPMCycleRepair, 'rpm', (), ('ssh', 'power',)),
        (ServoSysRqRepair, 'sysrq', (), ('ssh',)),
        (ServoResetRepair, 'servoreset', (), ('ssh',)),

        # N.B. FirmwareRepair can't fix a 'good_au' failure directly,
        # because it doesn't remove the flag file that triggers the
        # failure.  We include it as a repair trigger because it's
        # possible the the last update failed because of the firmware,
        # and we want the repair steps below to be able to trust the
        # firmware.
        (FirmwareRepair, 'firmware', (), ('ssh', 'fwstatus', 'good_au',)),

        (CrosRebootRepair, 'reboot', ('ssh',), ('devmode', 'writable',)),

        (ColdRebootRepair, 'coldboot', ('ssh',), ('ec_reset',)),
    )
    return repair_actions


def _cros_extended_repair_actions(au_triggers=_CROS_AU_TRIGGERS,
                                  powerwash_triggers=_CROS_POWERWASH_TRIGGERS,
                                  usb_triggers=_CROS_USB_TRIGGERS):
    """Return the extended repair actions for a `CrosHost`"""

    # The dependencies and triggers for the 'au', 'powerwash', and 'usb'
    # repair actions stack up:  Each one is able to repair progressively
    # more verifiers than the one before.  The 'triggers' lists specify
    # the progression.

    repair_actions = (
        (AutoUpdateRepair, 'au',
                usb_triggers + powerwash_triggers, au_triggers),
        (PowerWashRepair, 'powerwash',
                usb_triggers, powerwash_triggers + au_triggers),
        (ServoInstallRepair, 'usb',
                (), usb_triggers + powerwash_triggers + au_triggers),
    )
    return repair_actions


def _cros_repair_actions():
    """Return the repair actions for a `CrosHost`."""
    repair_actions = (_cros_basic_repair_actions() +
                      _cros_extended_repair_actions())
    return repair_actions


def create_cros_repair_strategy():
    """Return a `RepairStrategy` for a `CrosHost`."""
    verify_dag = _cros_verify_dag()
    repair_actions = _cros_repair_actions()
    return hosts.RepairStrategy(verify_dag, repair_actions, 'cros')


def _moblab_verify_dag():
    """Return the verification DAG for a `MoblabHost`."""
    FirmwareVersionVerifier = cros_firmware.FirmwareVersionVerifier
    verify_dag = (
        (repair_utils.SshVerifier,        'ssh',     ()),
        (ACPowerVerifier,                 'power',   ('ssh',)),
        (FirmwareVersionVerifier,         'rwfw',    ('ssh',)),
        (PythonVerifier,                  'python',  ('ssh',)),
        (repair_utils.LegacyHostVerifier, 'cros',    ('ssh',)),
    )
    return verify_dag


def _moblab_repair_actions():
    """Return the repair actions for a `MoblabHost`."""
    repair_actions = (
        (repair_utils.RPMCycleRepair, 'rpm', (), ('ssh', 'power',)),
        (AutoUpdateRepair, 'au', ('ssh',), _CROS_AU_TRIGGERS),
    )
    return repair_actions


def create_moblab_repair_strategy():
    """
    Return a `RepairStrategy` for a `MoblabHost`.

    Moblab is a subset of the CrOS verify and repair.  Several pieces
    are removed because they're not expected to be meaningful.  Some
    others are removed for more specific reasons:

    'tpm':  Moblab DUTs don't run the tests that matter to this
        verifier.  TODO(jrbarnette)  This assertion is unproven.

    'good_au':  This verifier can't pass, because the Moblab AU
        procedure doesn't properly delete the PROVISION_FAILED file.
        TODO(jrbarnette) We should refactor ChromiumOSUpdater so
        that it can be different for Moblab.

    'firmware':  Moblab DUTs shouldn't be in FAFT pools, so we don't try
        this.

    'powerwash':  Powerwash on Moblab causes trouble with deleting the
        DHCP leases file, so we skip it.
    """
    verify_dag = _moblab_verify_dag()
    repair_actions = _moblab_repair_actions()
    return hosts.RepairStrategy(verify_dag, repair_actions, 'moblab')


def _jetstream_repair_actions():
    """Return the repair actions for a `JetstreamHost`."""
    au_triggers = _CROS_AU_TRIGGERS
    jetstream_tpm_triggers = ('jetstream_tpm', 'jetstream_attestation')
    jetstream_service_triggers = (jetstream_tpm_triggers +
                                  ('jetstream_services',))
    repair_actions = (
        _cros_basic_repair_actions() +
        (
            (JetstreamTpmRepair, 'jetstream_tpm_repair',
             _CROS_USB_TRIGGERS + _CROS_POWERWASH_TRIGGERS,
             au_triggers + jetstream_tpm_triggers),

            (JetstreamServiceRepair, 'jetstream_service_repair',
             _CROS_USB_TRIGGERS + _CROS_POWERWASH_TRIGGERS + (
                 'jetstream_tpm', 'jetstream_attestation'),
             au_triggers + jetstream_service_triggers),
        ) +
        _cros_extended_repair_actions(
            au_triggers=au_triggers + jetstream_service_triggers))
    return repair_actions


def _jetstream_verify_dag():
    """Return the verification DAG for a `JetstreamHost`."""
    verify_dag = _cros_verify_dag() + (
        (JetstreamTpmVerifier, 'jetstream_tpm', ('ssh',)),
        (JetstreamAttestationVerifier, 'jetstream_attestation', ('ssh',)),
        (JetstreamServicesVerifier, 'jetstream_services', ('ssh',)),
    )
    return verify_dag


def create_jetstream_repair_strategy():
    """
    Return a `RepairStrategy` for a `JetstreamHost`.

    The Jetstream repair strategy is based on the CrOS verify and repair,
    but adds the JetstreamServicesVerifier.
    """
    verify_dag = _jetstream_verify_dag()
    repair_actions = _jetstream_repair_actions()
    return hosts.RepairStrategy(verify_dag, repair_actions, 'jetstream')


# TODO(pprabhu) Move this to a better place. I have no idea what that place
# would be.
def _is_virtual_machine(host):
    """Determine whether the given |host| is a virtual machine.

    @param host: a hosts.Host object.
    @returns True if the host is a virtual machine, False otherwise.
    """
    output = host.run('cat /proc/cpuinfo | grep "model name"')
    return output.stdout and 'qemu' in output.stdout.lower()


class CryptohomeStatus(dict):
    """Wrapper for getting cryptohome status from a host."""

    def __init__(self, host):
        super(CryptohomeStatus, self).__init__()
        self.update(_get_cryptohome_status(host))
        self.tpm = self['tpm']

    @property
    def tpm_enabled(self):
        # pylint: disable=missing-docstring
        return self.tpm.get('enabled') == True

    @property
    def tpm_owned(self):
        # pylint: disable=missing-docstring
        return self.tpm.get('owned') == True

    @property
    def tpm_can_load_srk(self):
        # pylint: disable=missing-docstring
        return self.tpm.get('can_load_srk') == True

    @property
    def tpm_can_load_srk_pubkey(self):
        # pylint: disable=missing-docstring
        return self.tpm.get('can_load_srk_pubkey') == True


def _get_cryptohome_status(host):
    """Returns a dictionary containing the cryptohome status.

    @param host: a hosts.Host object.
    @returns A dictionary containing the cryptohome status.
    @raises AutoservVerifyError: if the output could not be parsed or the TPM
       status is missing.
    @raises hosts.AutoservRunError: if the cryptohome command failed.
    """
    # This cryptohome command emits status information in JSON format. It
    # looks something like this:
    # {
    #    "installattrs": {
    #       ...
    #    },
    #    "mounts": [ {
    #       ...
    #    } ],
    #    "tpm": {
    #       "being_owned": false,
    #       "can_connect": true,
    #       "can_decrypt": false,
    #       "can_encrypt": false,
    #       "can_load_srk": true,
    #       "can_load_srk_pubkey": true,
    #       "enabled": true,
    #       "has_context": true,
    #       "has_cryptohome_key": false,
    #       "has_key_handle": false,
    #       "last_error": 0,
    #       "owned": true
    #    }
    # }
    try:
        output = host.run('cryptohome --action=status').stdout.strip()
        status = json.loads(output)
        if 'tpm' not in status:
            raise hosts.AutoservVerifyError('TPM status is missing')
        return status
    except ValueError:
        raise hosts.AutoservVerifyError('Unable to parse cryptohome status')