| # Copyright 2017 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| from autotest_lib.server import utils |
| |
| AUTHOR = "mzhuo@chromium.org" |
| NAME = "enterprise_CFM_Test.sanity" |
| TIME = "LONG" |
| TEST_CATEGORY = "Functional" |
| TEST_CLASS = "enterprise" |
| TEST_TYPE = "server" |
| DEPENDENCIES = "" |
| JOB_RETRIES = 1 |
| |
| DOC = """ |
| This test runs various tests and verifications for CfM devices. |
| Tests and verifications can be selected in control file. |
| action_list defines the list of all available tests, which are keys for dict |
| action_list, value for the key defines how many times this test will be run |
| in each loop. |
| verification_list defineds the list of all available verifications, |
| which are keys for dict verification_list. True means this verification specified |
| by this key will be performed. |
| Testing flow can be set in control file. |
| |
| Example to run it: |
| test_that --autotest_dir ~/trunk/src/third_party/autotest/files/ --board=guado |
| 100.123.174.2 enterprise_CFM_Test.sanity |
| |
| Note: |
| 1. Modify dict error_key_words to meet each test's need. |
| 2. Modify meeting code which works for domain device is enrolled in. |
| """ |
| |
| args_dict = utils.args_to_dict(args) |
| |
| error_key_words = {'usb': [ |
| 'Setup ERROR: setup context command', |
| 'URB transfer length is wrong', |
| 'device descriptor read', |
| 'unable to enumerate USB device', |
| 'hub_port_status failed', |
| 'cannot reset port', |
| 'nonzero write bulk status received', |
| 'Device not responding to setup address', |
| 'device not accepting address', |
| 'Set SEL for device-initiated U2 failed', |
| 'Set SEL for device-initiated U1 failed', |
| 'Disable of device-initiated U1 failed', |
| 'Disable of device-initiated U2 failed', |
| 'usb_set_interface failed', |
| 'MIMO has wedged; issuing hub reset' |
| ], |
| 'kernel': [ |
| 'Error reading udev log info crash_reporter-udev-collection', |
| 'stuck on bsd ring', |
| 'stuck on render ring', |
| 'GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace', |
| 'GPU crash dump saved to', |
| 'ERROR Transfer event TRB DMA ptr', |
| 'crashes with segfault', |
| 'segfault at', |
| 'Stored minidump to', |
| 'Leaving core file', |
| 'cut here', |
| 'end trace', |
| 'Failed to resubmit video URB', |
| 'go2001_watchdog:', |
| 'go2001_ctx_error_locked:', |
| 'Out of memory: Kill process', |
| 'Killed process' |
| ], |
| 'video': [ |
| 'uvcvideo: Failed to query', |
| 'uvcvideo: Non-zero status' |
| 'uvcvideo: Failed to set UVC commit control', |
| 'uvcvideo: UVC non compliance', |
| 'Failed to resubmit video URB', |
| 'No streaming interface found', |
| 'Dequeued v4l2 buffer contains corrupted data' |
| ], |
| 'audio': [ |
| 'hw_params: Input/output error: rate:', |
| 'usb_set_interface failed', |
| ], |
| 'chrome': [ |
| 'Cannot get RenderProcess', |
| 'segfault at', |
| 'ERR crash_reporter', |
| 'Watchdog resetting firmware', |
| 'Failed to create scanout buffer', |
| 'Failed to enable controller', |
| 'Failed to configure: device', |
| 'Failed to export buffer to dma_buf', |
| 'Failed to take control of the display', |
| 'Failed to modeset controller', |
| 'Failed to encode frame.' |
| ], |
| 'atrus': [ |
| 'write: Connection timed out', |
| 'Error: report failed', |
| 'write: Broken pipe', |
| 'protocol error' |
| ], |
| 'usb_stability': [ |
| 'USB disconnect', |
| 'New USB device found' |
| ] |
| } |
| |
| |
| # !!! Please change meeting code working for CfM. |
| # !!! If meeting_code for different domain is used, meeting might be timeout. |
| # vol_change_mode: if set to 1, make one call to set voluem to target volume, |
| # else, make multiple calls to update volume until volume |
| # equals to target volume. |
| test_config = { |
| 'gpio_list': ['218','219', '209'], |
| 'gpiopause': 8, |
| 'puts': "", |
| 'is_meeting': 1, |
| 'meeting_code': 'otg-dkps-ovj', # this works for crosprq4.com |
| 'repeat': 5, |
| 'reboot_timeout': 60, |
| 'loop_timeout': 30, |
| 'action_timeout': 20, |
| 'min_timeout': 10, |
| 'debug_timeout': 5, |
| 'vol_change_step': 6, |
| 'vol_change_mode': 1, |
| 'reboot_after_min_meets': 1, |
| 'gpio_after_min_meets': 1 |
| } |
| |
| #action_config['meeting_test'] should be 0, 1. |
| # 0: no meeting test to be done |
| # 1: In each loop first CfM joins meeting, after all tests are done, |
| # CfM leaves meeting. |
| #the value of 'mute_unmute_camera_test', 'mute_unmute_mic_test' and |
| #'speaker_volume_test" and etc is number of test for each key to be done in |
| #one meeting. |
| action_config = { |
| 'meeting_test': 1, |
| 'mute_unmute_camera_test': 4, |
| 'mute_unmute_mic_test': 4, |
| 'speaker_volume_test': 4, |
| 'gpio_test': 2, |
| 'reboot_test': 2, |
| 'reset_usb_test': 0, |
| 'flap_monitor_test': 0 |
| } |
| |
| |
| verification_config = { |
| 'check_usb_enumeration':True, |
| 'check_usb_inf_init': True, |
| 'check_v4l2_interface': True, |
| 'check_audio_card': False, |
| 'check_cras_speaker': True, |
| 'check_cras_mic': True, |
| 'check_cras_pspeaker': True, |
| 'check_cras_pmic': True, |
| 'check_cras_speaker_vol': True, |
| 'check_cras_mic_mute': True, |
| 'check_prefer_camera': False, |
| 'check_camera_mute': False, |
| 'check_audio_stream': True, |
| 'check_video_stream': True, |
| 'check_hotrod_speaker': False, |
| 'check_hotrod_mic': False, |
| 'check_hotrod_camera': False, |
| 'check_hotrod_pspeaker': False, |
| 'check_hotrod_pmic': False, |
| 'check_hotrod_pcamera': False, |
| 'check_hotrod_speaker_vol': False, |
| 'check_hotrod_mic_state': False, |
| 'check_hotrod_camera_state': False, |
| 'check_usb_errorlog': False, |
| 'check_kernel_errorlog': False, |
| 'check_video_errorlog': False, |
| 'check_audio_errorlog': False, |
| 'check_chrome_errorlog': False, |
| 'check_atrus_errorlog': False, |
| 'check_usb_stability': False, |
| 'check_process_crash': True, |
| 'check_kernel_panic': False, |
| 'check_chrome_restarted': True, |
| 'check_cfm_rebooted': True |
| } |
| |
| |
| test_flow_control = { |
| 'reboot_before_start': True, |
| 'run_test_only': True, |
| 'setup_cleanup': True, |
| 'abort_on_failure': True, |
| 'random_mode': True, |
| 'recovery_on_fatal_failure': True, |
| 'skip_cfm_check': False, |
| 'report': True |
| } |
| |
| def run_test(machine): |
| host = hosts.create_host(machine) |
| run_test_only = test_flow_control['run_test_only'] |
| job.run_test('enterprise_CFM_Test', host=host, |
| run_test_only=run_test_only, |
| test_config=test_config, action_config=action_config, |
| verification_config=verification_config, |
| error_key_words=error_key_words, |
| test_flow_control=test_flow_control, |
| tag='sanity') |
| |
| |
| parallel_simple(run_test, machines) |
