# Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import os, fcntl, logging, struct, random

from autotest_lib.client.bin import test, utils
from autotest_lib.client.common_lib import error


class hardware_TrimIntegrity(test.test):
    """
    Performs data integrity trim test on an unmounted partition.

    This test will write 1 GB of data and verify that trimmed data are gone and
    untrimmed data are unaffected. The verification will be run in 5 passes with
    0%, 25%, 50%, 75%, and 100% of data trimmed.

    Also, perform 4K random read QD32 before and after trim. We should see some
    speed / latency difference if the device firmware trim data properly.

    Condition for test result:
    - Trim command is not supported
      -> Target disk is a harddisk           : TestNA
      -> Target disk is SCSI disk w/o trim   : TestNA
      -> Otherwise                           : TestFail
    - Can not verify integrity of untrimmed data
      -> All case                            : TestFail
    - Trim data is not Zero
      -> SSD with RZAT                       : TestFail
      -> Otherwise                           : TestNA
    """

    version = 1
    FILE_SIZE = 1024 * 1024 * 1024
    CHUNK_SIZE = 192 * 1024
    TRIM_RATIO = [0, 0.25, 0.5, 0.75, 1]

    hdparm_trim = 'Data Set Management TRIM supported'
    hdparm_rzat = 'Deterministic read ZEROs after TRIM'

    # Use hash value to check integrity of the random data.
    HASH_CMD = 'sha256sum | cut -d" " -f 1'
    # 0x1277 is ioctl BLKDISCARD command
    IOCTL_TRIM_CMD = 0x1277
    IOCTL_NOT_SUPPORT_ERRNO = 95

    def _get_hash(self, chunk_count, chunk_size):
        """
        Get hash for every chunk of data.
        """
        cmd = str('for i in $(seq 0 %d); do dd if=%s of=/dev/stdout bs=%d'
                  ' count=1 skip=$i iflag=direct | %s; done' %
                  (chunk_count - 1, self._filename, chunk_size, self.HASH_CMD))
        return utils.run(cmd).stdout.split()

    def _do_trim(self, fd, offset, size):
        """
        Invoke ioctl to trim command.
        """
        fcntl.ioctl(fd, self.IOCTL_TRIM_CMD, struct.pack('QQ', offset, size))

    def _verify_trim_support(self, size):
        """
        Check for trim support in ioctl. Raise TestNAError if not support.

        @param size: size to try the trim command
        """
        try:
            fd = os.open(self._filename, os.O_RDWR, 0666)
            self._do_trim(fd, 0, size)
        except IOError, err:
            if err.errno == self.IOCTL_NOT_SUPPORT_ERRNO:
                reason = 'IOCTL Does not support trim.'
                msg = utils.get_storage_error_msg(self._diskname, reason)

                if utils.is_disk_scsi(self._diskname):
                    if utils.is_disk_harddisk(self._diskname):
                        msg += ' Disk is a hard disk.'
                        raise error.TestNAError(msg)
                    if utils.verify_hdparm_feature(self._diskname,
                                                   self.hdparm_trim):
                        msg += ' Disk claims trim supported.'
                    else:
                        msg += ' Disk does not claim trim supported.'
                        raise error.TestNAError(msg)
                # SSD with trim support / mmc / sd card
                raise error.TestFailError(msg)
            else:
                raise
        finally:
            os.close(fd)

    def initialize(self):
        self.job.use_sequence_number = True

    def run_once(self, filename=None, file_size=FILE_SIZE,
                 chunk_size=CHUNK_SIZE, trim_ratio=TRIM_RATIO):
        """
        Executes the test and logs the output.
        @param file_name:  file/disk name to test
                           default: spare partition of internal disk
        @param file_size:  size of data to test. default: 1GB
        @param chunk_size: size of chunk to calculate hash/trim. default: 64KB
        @param trim_ratio: list of ratio of file size to trim data
                           default: [0, 0.25, 0.5, 0.75, 1]
        """

        if not filename:
            self._diskname = utils.get_fixed_dst_drive()
            if self._diskname == utils.get_root_device():
                self._filename = utils.get_free_root_partition()
            else:
                self._filename = self._diskname
        else:
            self._filename = filename
            self._diskname = utils.get_disk_from_filename(filename)

        if file_size == 0:
            fulldisk = True
            file_size = utils.get_disk_size(self._filename)
            if file_size == 0:
                cmd = ('%s seem to have 0 storage block. Is the media present?'
                        % filename)
                raise error.TestError(cmd)
        else:
            fulldisk = False

        # Make file size multiple of 4 * chunk size
        file_size -= file_size % (4 * chunk_size)

        if fulldisk:
            fio_file_size = 0
        else:
            fio_file_size = file_size

        logging.info('filename: %s, filesize: %d', self._filename, file_size)

        self._verify_trim_support(chunk_size)

        # Calculate hash value for zero'ed and one'ed data
        cmd = str('dd if=/dev/zero bs=%d count=1 | %s' %
                  (chunk_size, self.HASH_CMD))
        zero_hash = utils.run(cmd).stdout.strip()

        cmd = str("dd if=/dev/zero bs=%d count=1 | tr '\\0' '\\xff' | %s" %
                  (chunk_size, self.HASH_CMD))
        one_hash = utils.run(cmd).stdout.strip()

        trim_hash = ""

        # Write random data to disk
        chunk_count = file_size / chunk_size
        cmd = str('dd if=/dev/urandom of=%s bs=%d count=%d oflag=direct' %
                  (self._filename, chunk_size, chunk_count))
        utils.run(cmd)

        ref_hash = self._get_hash(chunk_count, chunk_size)

        # Check read speed/latency when reading real data.
        self.job.run_test('hardware_StorageFio',
                          filesize=fio_file_size,
                          requirements=[('4k_read_qd32', [])],
                          tag='before_trim')

        # Generate random order of chunk to trim
        trim_order = list(range(0, chunk_count))
        random.shuffle(trim_order)
        trim_status = [False] * chunk_count

        # Init stat variable
        data_verify_count = 0
        data_verify_match = 0
        trim_verify_count = 0
        trim_verify_zero = 0
        trim_verify_one = 0
        trim_verify_non_delete = 0
        trim_deterministic = True

        last_ratio = 0
        for ratio in trim_ratio:

            # Do trim
            begin_trim_chunk = int(last_ratio * chunk_count)
            end_trim_chunk = int(ratio * chunk_count)
            fd = os.open(self._filename, os.O_RDWR, 0666)
            for chunk in trim_order[begin_trim_chunk:end_trim_chunk]:
                self._do_trim(fd, chunk * chunk_size, chunk_size)
                trim_status[chunk] = True
            os.close(fd)
            last_ratio = ratio

            cur_hash = self._get_hash(chunk_count, chunk_size)

            trim_verify_count += int(ratio * chunk_count)
            data_verify_count += chunk_count - int(ratio * chunk_count)

            # Verify hash
            for cur, ref, trim in zip(cur_hash, ref_hash, trim_status):
                if trim:
                    if not trim_hash:
                        trim_hash = cur
                    elif cur != trim_hash:
                        trim_deterministic = False

                    if cur == zero_hash:
                        trim_verify_zero += 1
                    elif cur == one_hash:
                        trim_verify_one += 1
                    elif cur == ref:
                        trim_verify_non_delete += 1
                else:
                    if cur == ref:
                        data_verify_match += 1

        keyval = dict()
        keyval['data_verify_count'] = data_verify_count
        keyval['data_verify_match'] = data_verify_match
        keyval['trim_verify_count'] = trim_verify_count
        keyval['trim_verify_zero'] = trim_verify_zero
        keyval['trim_verify_one'] = trim_verify_one
        keyval['trim_verify_non_delete'] = trim_verify_non_delete
        keyval['trim_deterministic'] = trim_deterministic
        self.write_perf_keyval(keyval)

        # Check read speed/latency when reading from trimmed data.
        self.job.run_test('hardware_StorageFio',
                          filesize=fio_file_size,
                          requirements=[('4k_read_qd32', [])],
                          tag='after_trim')

        if data_verify_match < data_verify_count:
            reason = 'Fail to verify untrimmed data.'
            msg = utils.get_storage_error_msg(self._diskname, reason)
            raise error.TestFail(msg)

        if trim_verify_zero <  trim_verify_count:
            reason = 'Trimmed data are not zeroed.'
            msg = utils.get_storage_error_msg(self._diskname, reason)
            if utils.is_disk_scsi(self._diskname):
                if utils.verify_hdparm_feature(self._diskname,
                                               self.hdparm_rzat):
                    msg += ' Disk claim deterministic read zero after trim.'
                    raise error.TestFail(msg)
            raise error.TestNAError(msg)