# Copyright 2015 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

import logging
import time

from autotest_lib.client.common_lib import error

class ConnectionError(Exception):
    """Raised on an error of connecting DUT."""
    pass


class _BaseFwBypasser(object):
    """Base class that controls bypass logic for firmware screens."""

    # Duration of holding Volume down button to quickly bypass the developer
    # warning screen in tablets/detachables.
    HOLD_VOL_DOWN_BUTTON_BYPASS = 3

    def __init__(self, faft_framework):
        self.servo = faft_framework.servo
        self.faft_config = faft_framework.faft_config
        self.client_host = faft_framework._client


    def bypass_dev_mode(self):
        """Bypass the dev mode firmware logic to boot internal image."""
        raise NotImplementedError


    def bypass_dev_boot_usb(self):
        """Bypass the dev mode firmware logic to boot USB."""
        raise NotImplementedError


    def bypass_rec_mode(self):
        """Bypass the rec mode firmware logic to boot USB."""
        raise NotImplementedError


    def trigger_dev_to_rec(self):
        """Trigger to the rec mode from the dev screen."""
        raise NotImplementedError


    def trigger_rec_to_dev(self):
        """Trigger to the dev mode from the rec screen."""
        raise NotImplementedError


    def trigger_dev_to_normal(self):
        """Trigger to the normal mode from the dev screen."""
        raise NotImplementedError


class _CtrlDBypasser(_BaseFwBypasser):
    """Controls bypass logic via Ctrl-D combo."""

    def bypass_dev_mode(self):
        """Bypass the dev mode firmware logic to boot internal image.

        Press Ctrl-D repeatedly. To obtain a low firmware boot time, pressing
        Ctrl+D for every half second until firmware_screen delay has been
        reached.
        """
        logging.info("Pressing Ctrl-D.")
        # At maximum, device waits for twice of firmware_screen delay to
        # bypass the Dev screen.
        timeout = time.time() + (self.faft_config.firmware_screen * 2)
        while time.time() < timeout:
            self.servo.ctrl_d()
            time.sleep(0.5)
            if self.client_host.ping_wait_up(timeout=0.1):
                break


    def bypass_dev_boot_usb(self):
        """Bypass the dev mode firmware logic to boot USB."""
        time.sleep(self.faft_config.firmware_screen)
        self.servo.ctrl_u()


    def bypass_rec_mode(self):
        """Bypass the rec mode firmware logic to boot USB."""
        self.servo.switch_usbkey('host')
        time.sleep(self.faft_config.usb_plug)
        self.servo.switch_usbkey('dut')
        logging.info('Enabled dut_sees_usb')
        if not self.client_host.ping_wait_up(
                timeout=self.faft_config.delay_reboot_to_ping):
            logging.info('ping timed out, try REC_ON')
            psc = self.servo.get_power_state_controller()
            psc.power_on(psc.REC_ON)


    def trigger_dev_to_rec(self):
        """Trigger to the rec mode from the dev screen."""
        time.sleep(self.faft_config.firmware_screen)
        self.servo.enter_key()


    def trigger_rec_to_dev(self):
        """Trigger to the dev mode from the rec screen."""
        time.sleep(self.faft_config.firmware_screen)
        self.servo.ctrl_d()
        time.sleep(self.faft_config.confirm_screen)
        if self.faft_config.rec_button_dev_switch:
            logging.info('RECOVERY button pressed to switch to dev mode')
            self.servo.toggle_recovery_switch()
        elif self.faft_config.power_button_dev_switch:
            logging.info('POWER button pressed to switch to dev mode')
            self.servo.power_normal_press()
        else:
            logging.info('ENTER pressed to switch to dev mode')
            self.servo.enter_key()


    def trigger_dev_to_normal(self):
        """Trigger to the normal mode from the dev screen."""
        time.sleep(self.faft_config.firmware_screen)
        self.servo.enter_key()
        time.sleep(self.faft_config.confirm_screen)
        self.servo.enter_key()


class _JetstreamBypasser(_BaseFwBypasser):
    """Controls bypass logic of Jetstream devices."""

    def bypass_dev_mode(self):
        """Bypass the dev mode firmware logic to boot internal image."""
        # Jetstream does nothing to bypass.
        pass


    def bypass_dev_boot_usb(self):
        """Bypass the dev mode firmware logic to boot USB."""
        self.servo.switch_usbkey('dut')
        time.sleep(self.faft_config.firmware_screen)
        self.servo.toggle_development_switch()


    def bypass_rec_mode(self):
        """Bypass the rec mode firmware logic to boot USB."""
        self.servo.switch_usbkey('host')
        time.sleep(self.faft_config.usb_plug)
        self.servo.switch_usbkey('dut')
        if not self.client_host.ping_wait_up(
                timeout=self.faft_config.delay_reboot_to_ping):
            psc = self.servo.get_power_state_controller()
            psc.power_on(psc.REC_ON)


    def trigger_dev_to_rec(self):
        """Trigger to the rec mode from the dev screen."""
        # Jetstream does not have this triggering logic.
        raise NotImplementedError


    def trigger_rec_to_dev(self):
        """Trigger to the dev mode from the rec screen."""
        self.servo.disable_development_mode()
        time.sleep(self.faft_config.firmware_screen)
        self.servo.toggle_development_switch()


    def trigger_dev_to_normal(self):
        """Trigger to the normal mode from the dev screen."""
        # Jetstream does not have this triggering logic.
        raise NotImplementedError


class _TabletDetachableBypasser(_BaseFwBypasser):
    """Controls bypass logic of tablet/ detachable chromebook devices."""

    def set_button(self, button, duration, info):
        """Helper method that sets the button hold time for UI selections"""
        self.servo.set_nocheck(button, duration)
        time.sleep(self.faft_config.confirm_screen)
        logging.info(info)


    def bypass_dev_boot_usb(self):
        """Bypass the dev mode firmware logic to boot USB.

        On tablets/ detachables, recovery entered by pressing pwr, vol up
        & vol down buttons for 10s.
           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in DEV screen:
                 Boot legacy BIOS
                 Boot USB image
                 Boot developer image*
                 Cancel
                 Power off
                 Language

        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.

        Note: if dev_default_boot=usb, the default selection will start on USB,
        and this will move up one to legacy boot instead.
        """
        self.trigger_dev_screen()
        time.sleep(self.faft_config.firmware_screen)
        self.set_button('volume_up_hold', 100, ('Selecting power as'
                        ' enter key to select Boot USB Image'))
        self.servo.power_short_press()

    def bypass_dev_default_boot(self):
        """Open the Developer Options menu, and accept the default boot device

           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in DEV screen:
                 Boot legacy BIOS*      (default if dev_default_boot=legacy)
                 Boot USB image*        (default if dev_default_boot=usb)
                 Boot developer image*  (default if dev_default_boot=disk)
                 Cancel
                 Power off
                 Language

        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        self.trigger_dev_screen()
        time.sleep(self.faft_config.firmware_screen)
        logging.info('Selecting power as enter key to accept the default'
                     ' boot option.')
        self.servo.power_short_press()

    def bypass_rec_mode(self):
        """Bypass the rec mode firmware logic to boot USB."""
        self.servo.switch_usbkey('host')
        time.sleep(self.faft_config.usb_plug)
        self.servo.switch_usbkey('dut')
        logging.info('Enabled dut_sees_usb')
        if not self.client_host.ping_wait_up(
                timeout=self.faft_config.delay_reboot_to_ping):
            logging.info('ping timed out, try REC_ON')
            psc = self.servo.get_power_state_controller()
            psc.power_on(psc.REC_ON)


    def bypass_dev_mode(self):
        """Bypass the developer warning screen immediately to boot into
        internal disk.

        On tablets/detachables, press & holding the Volume down button for
        3-seconds will quickly bypass the developer warning screen.
        """
        # Unit for the "volume_down_hold" console command is msec.
        duration = (self.HOLD_VOL_DOWN_BUTTON_BYPASS + 0.1) * 1000
        logging.info("Press and hold volume down button for %.1f seconds to "
                     "immediately bypass the Developer warning screen.",
                     self.HOLD_VOL_DOWN_BUTTON_BYPASS + 0.1)
        # At maximum, device waits for twice of firmware_screen delay to
        # bypass the Dev screen.
        timeout = time.time() + (self.faft_config.firmware_screen * 2)
        # To obtain a low firmware boot time, volume_down button pressed for
        # every 3.1 seconds until firmware_screen delay has been reached.
        while time.time() < timeout:
            self.servo.set_nocheck('volume_down_hold', duration)
            # After pressing 'volume_down_hold' button, wait for 0.1 seconds
            # before start pressing the button for next iteration.
            time.sleep(0.1)
            if self.client_host.ping_wait_up(timeout=0.1):
                break


    def trigger_dev_screen(self):
        """Helper method that transitions from DEVELOPER WARNING to DEV screen

           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in DEV screen:
                 Boot legacy BIOS
                 Boot USB image
                 Boot developer image*
                 Cancel
                 Power off
                 Language
        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        time.sleep(self.faft_config.firmware_screen)
        self.servo.set_nocheck('volume_up_hold', 100)
        time.sleep(self.faft_config.confirm_screen)
        self.servo.set_nocheck('volume_up_hold', 100)
        time.sleep(self.faft_config.confirm_screen)
        self.set_button('volume_up_hold', 100, ('Selecting power '
                        'as enter key to select Developer Options'))
        self.servo.power_short_press()


    def trigger_rec_to_dev(self):
        """Trigger to the dev mode from the rec screen using vol up button.

        On tablets/ detachables, recovery entered by pressing pwr, vol up
        & vol down buttons for 10s. TO_DEV screen is entered by pressing
        vol up & vol down buttons together on the INSERT screen.
           Menu options seen in TO_DEV screen:
                 Confirm enabling developer mode
                 Cancel*
                 Power off
                 Language
        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        time.sleep(self.faft_config.firmware_screen)
        self.set_button('volume_up_down_hold', 100, ('Enter Recovery Menu.'))
        time.sleep(self.faft_config.confirm_screen)
        self.set_button('volume_up_hold', 100, ('Selecting power as '
                        'enter key to select Confirm Enabling Developer Mode'))
        self.servo.power_short_press()
        time.sleep(self.faft_config.firmware_screen)


    def trigger_dev_to_normal(self):
        """Trigger to the normal mode from the dev screen.

           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in TO_NORM screen:
                 Confirm Enabling Verified Boot*
                 Cancel
                 Power off
                 Language
        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        time.sleep(self.faft_config.firmware_screen)
        self.set_button('volume_up_hold', 100, ('Selecting '
                        'Enable Root Verification using pwr '
                        'button to enter TO_NORM screen'))
        self.servo.power_short_press()
        logging.info('Transitioning from DEV to TO_NORM screen.')
        time.sleep(self.faft_config.firmware_screen)
        logging.info('Selecting Confirm Enabling Verified '
                        'Boot using pwr button in '
                        'TO_NORM screen')
        self.servo.power_short_press()

    def trigger_dev_to_rec(self):
        """Trigger to the TO_NORM screen from the dev screen.
           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in TO_NORM screen:
                 Confirm Enabling Verified Boot*
                 Cancel
                 Power off
                 Language
        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        time.sleep(self.faft_config.firmware_screen)
        self.set_button('volume_up_hold', 100, ('Selecting '
                        'Enable Root Verification using pwr '
                        'button to enter TO_NORM screen'))
        self.servo.power_short_press()
        logging.info('Transitioning from DEV to TO_NORM screen.')
        time.sleep(self.faft_config.firmware_screen)

        # In firmware_FwScreenPressPower, test will power off the DUT using
        # Power button in second screen (TO_NORM screen) so scrolling to
        # Power-off is necessary in this case. Hence scroll to Power-off as
        # a generic action and wait for next action of either Lid close or
        # power button press.
        self.servo.set_nocheck('volume_down_hold', 100)
        time.sleep(self.faft_config.confirm_screen)
        self.servo.set_nocheck('volume_down_hold', 100)
        time.sleep(self.faft_config.confirm_screen)


class _BaseModeSwitcher(object):
    """Base class that controls firmware mode switching."""

    HOLD_VOL_DOWN_BUTTON_BYPASS = _BaseFwBypasser.HOLD_VOL_DOWN_BUTTON_BYPASS

    FW_BYPASSER_CLASS = _BaseFwBypasser

    def __init__(self, faft_framework):
        self.faft_framework = faft_framework
        self.client_host = faft_framework._client
        self.faft_client = faft_framework.faft_client
        self.servo = faft_framework.servo
        self.faft_config = faft_framework.faft_config
        self.checkers = faft_framework.checkers
        self.bypasser = self._create_fw_bypasser()
        self._backup_mode = None

    def _create_fw_bypasser(self):
        """Creates a proper firmware bypasser.

        @rtype: _TabletDetachableBypasser | _CtrlDBypasser | _JetstreamBypasser
        """
        return self.FW_BYPASSER_CLASS(self.faft_framework)

    def setup_mode(self, mode):
        """Setup for the requested mode.

        It makes sure the system in the requested mode. If not, it tries to
        do so.

        @param mode: A string of mode, one of 'normal', 'dev', or 'rec'.
        @raise TestFail: If the system not switched to expected mode after
                         reboot_to_mode.

        """
        if not self.checkers.mode_checker(mode):
            logging.info('System not in expected %s mode. Reboot into it.',
                         mode)
            if self._backup_mode is None:
                # Only resume to normal/dev mode after test, not recovery.
                self._backup_mode = 'dev' if mode == 'normal' else 'normal'
            self.reboot_to_mode(mode)
            if not self.checkers.mode_checker(mode):
                raise error.TestFail('System not switched to expected %s'
                        ' mode after setup_mode.' % mode)

    def restore_mode(self):
        """Restores original dev mode status if it has changed.

        @raise TestFail: If the system not restored to expected mode.
        """
        if (self._backup_mode is not None and
            not self.checkers.mode_checker(self._backup_mode)):
            self.reboot_to_mode(self._backup_mode)
            if not self.checkers.mode_checker(self._backup_mode):
                raise error.TestFail('System not restored to expected %s'
                        ' mode in cleanup.' % self._backup_mode)


    def reboot_to_mode(self, to_mode, from_mode=None, sync_before_boot=True,
                       wait_for_dut_up=True):
        """Reboot and execute the mode switching sequence.

        This method simulates what a user would do to switch between different
        modes of ChromeOS.  Note that the modes are end-states where the OS is
        booted up to the Welcome screen, so it takes care of navigating through
        intermediate steps such as various boot confirmation screens.

        From the user perspective, these are the states (note that there's also
        a rec_force_mrc mode which is like rec mode but forces MRC retraining):

        normal <-----> dev <------ rec
          ^                         ^
          |                         |
          +-------------------------+

        This is the implementation, note that "from_mode" is only used for
        logging purposes.

        Normal <-----> Dev:
          _enable_dev_mode_and_reboot()

        Rec,normal -----> Dev:
          _disable_rec_mode_and_reboot()

        Any -----> normal:
          _enable_normal_mode_and_reboot()

        Normal <-----> rec:
          enable_rec_mode_and_reboot(usb_state='dut')

        Normal <-----> rec_force_mrc:
          _enable_rec_mode_force_mrc_and_reboot(usb_state='dut')

        Note that one shouldn't transition to dev again without going through the
        normal mode.  This is because trying to disable os_verification when it's
        already off is not supported by reboot_to_mode.

        @param to_mode: The target mode, one of 'normal', 'dev', or 'rec'.
        @param from_mode: The original mode, optional, one of 'normal, 'dev',
                          or 'rec'.
        @param sync_before_boot: True to sync to disk before booting.
        @param wait_for_dut_up: True to wait DUT online again. False to do the
                                reboot and mode switching sequence only and may
                                need more operations to pass the firmware
                                screen.
        """
        logging.info('-[ModeSwitcher]-[ start reboot_to_mode(%r, %r, %r) ]-',
                     to_mode, from_mode, wait_for_dut_up)

        if sync_before_boot:
            self.faft_framework.blocking_sync()
        if to_mode == 'rec':
            self.enable_rec_mode_and_reboot(usb_state='dut')
            if wait_for_dut_up:
                self.wait_for_client()

        elif to_mode == 'rec_force_mrc':
            self._enable_rec_mode_force_mrc_and_reboot(usb_state='dut')
            if wait_for_dut_up:
                self.wait_for_client()

        elif to_mode == 'dev':
            if sync_before_boot:
                lines = self.faft_client.system.run_shell_command_get_output(
                        'crossystem')
                logging.debug('-[ModeSwitcher]- crossystem output:\n%s',
                              '\n'.join(lines))
                devsw_cur = self.faft_client.system.get_crossystem_value(
                        'devsw_cur')
            else:
                devsw_cur = 'N/A'
            self._enable_dev_mode_and_reboot()
            if wait_for_dut_up:
                self.bypass_dev_mode()
                try:
                    self.wait_for_client()
                except ConnectionError as e:
                    raise ConnectionError('{} devsw_cur: {}'.format(e,
                                                                    devsw_cur))

        elif to_mode == 'normal':
            self._enable_normal_mode_and_reboot()
            if wait_for_dut_up:
                self.wait_for_client()

        else:
            raise NotImplementedError(
                    'Not supported mode switching from %s to %s' %
                     (str(from_mode), to_mode))
        logging.info('-[ModeSwitcher]-[ end reboot_to_mode(%r, %r, %r) ]-',
                     to_mode, from_mode, wait_for_dut_up)

    def simple_reboot(self, reboot_type='warm', sync_before_boot=True):
        """Simple reboot method

        Just reboot the DUT using either cold or warm reset.  Does not wait for
        DUT to come back online.  Will wait for test to handle this.

        @param reboot_type: A string of reboot type, 'warm' or 'cold'.
                            If reboot_type != warm/cold, raise exception.
        @param sync_before_boot: True to sync to disk before booting.
                                 If sync_before_boot=False, DUT offline before
                                 calling mode_aware_reboot.
        """
        if reboot_type == 'warm':
            reboot_method = self.servo.get_power_state_controller().warm_reset
        elif reboot_type == 'cold':
            reboot_method = self.servo.get_power_state_controller().reset
        else:
            raise NotImplementedError('Not supported reboot_type: %s',
                                      reboot_type)
        if sync_before_boot:
            boot_id = self.faft_framework.get_bootid()
            self.faft_framework.blocking_sync()
        logging.info("-[ModeSwitcher]-[ start simple_reboot(%r) ]-",
                     reboot_type)
        reboot_method()
        if sync_before_boot:
            self.wait_for_client_offline(orig_boot_id=boot_id)
        logging.info("-[ModeSwitcher]-[ end simple_reboot(%r) ]-",
                     reboot_type)

    def mode_aware_reboot(self, reboot_type=None, reboot_method=None,
                          sync_before_boot=True, wait_for_dut_up=True):
        """Uses a mode-aware way to reboot DUT.

        For example, if DUT is in dev mode, it requires pressing Ctrl-D to
        bypass the developer screen.

        @param reboot_type: A string of reboot type, one of 'warm', 'cold', or
                            'custom'. Default is a warm reboot.
        @param reboot_method: A custom method to do the reboot. Only use it if
                              reboot_type='custom'.
        @param sync_before_boot: True to sync to disk before booting.
                                 If sync_before_boot=False, DUT offline before
                                 calling mode_aware_reboot.
        @param wait_for_dut_up: True to wait DUT online again. False to do the
                                reboot only.
        """
        if reboot_type is None or reboot_type == 'warm':
            reboot_method = self.servo.get_power_state_controller().warm_reset
        elif reboot_type == 'cold':
            reboot_method = self.servo.get_power_state_controller().reset
        elif reboot_type != 'custom':
            raise NotImplementedError('Not supported reboot_type: %s',
                                      reboot_type)

        logging.info("-[ModeSwitcher]-[ start mode_aware_reboot(%r, %s, ..) ]-",
                     reboot_type, reboot_method.__name__)
        is_dev = is_rec = is_devsw_boot = False
        if sync_before_boot:
            is_dev = self.checkers.mode_checker('dev')
            is_rec = self.checkers.mode_checker('rec')
            is_devsw_boot = self.checkers.crossystem_checker(
                                               {'devsw_boot': '1'}, True)
            boot_id = self.faft_framework.get_bootid()
            self.faft_framework.blocking_sync()
        if is_rec:
            logging.info("-[mode_aware_reboot]-[ is_rec=%s is_dev_switch=%s ]-",
                         is_rec, is_devsw_boot)
        else:
            logging.info("-[mode_aware_reboot]-[ is_dev=%s ]-", is_dev)
        reboot_method()
        if sync_before_boot:
            self.wait_for_client_offline(orig_boot_id=boot_id)
        # Encapsulating the behavior of skipping dev firmware screen,
        # hitting ctrl-D
        # Note that if booting from recovery mode, we can predict the next
        # boot based on the developer switch position at boot (devsw_boot).
        # If devsw_boot is True, we will call bypass_dev_mode after reboot.
        if is_dev or is_devsw_boot:
            self.bypass_dev_mode()
        if wait_for_dut_up:
            self.wait_for_client()
        logging.info("-[ModeSwitcher]-[ end mode_aware_reboot(%r, %s, ..) ]-",
                     reboot_type, reboot_method.__name__)


    def enable_rec_mode_and_reboot(self, usb_state=None):
        """Switch to rec mode and reboot.

        This method emulates the behavior of the old physical recovery switch,
        i.e. switch ON + reboot + switch OFF, and the new keyboard controlled
        recovery mode, i.e. just press Power + Esc + Refresh.

        @param usb_state: A string, one of 'dut', 'host', or 'off'.
        """
        psc = self.servo.get_power_state_controller()
        psc.power_off()
        if usb_state:
            self.servo.switch_usbkey(usb_state)
        psc.power_on(psc.REC_ON)


    def _enable_rec_mode_force_mrc_and_reboot(self, usb_state=None):
        """Switch to rec mode, enable force mrc cache retraining, and reboot.

        This method emulates the behavior of the old physical recovery switch,
        i.e. switch ON + reboot + switch OFF, and the new keyboard controlled
        recovery mode, i.e. just press Power + Esc + Refresh.

        @param usb_state: A string, one of 'dut', 'host', or 'off'.
        """
        psc = self.servo.get_power_state_controller()
        psc.power_off()
        if usb_state:
            self.servo.switch_usbkey(usb_state)
        psc.power_on(psc.REC_ON_FORCE_MRC)

    def _disable_rec_mode_and_reboot(self, usb_state=None):
        """Disable the rec mode and reboot.

        It is achieved by calling power state controller to do a normal
        power on.
        """
        psc = self.servo.get_power_state_controller()
        psc.power_off()
        time.sleep(self.faft_config.ec_boot_to_pwr_button)
        psc.power_on(psc.REC_OFF)


    def _enable_dev_mode_and_reboot(self):
        """Switch to developer mode and reboot."""
        raise NotImplementedError


    def _enable_normal_mode_and_reboot(self):
        """Switch to normal mode and reboot."""
        raise NotImplementedError


    # Redirects the following methods to FwBypasser
    def bypass_dev_mode(self):
        """Bypass the dev mode firmware logic to boot internal image."""
        logging.info("-[bypass_dev_mode]-")
        self.bypasser.bypass_dev_mode()


    def bypass_dev_boot_usb(self):
        """Bypass the dev mode firmware logic to boot USB."""
        logging.info("-[bypass_dev_boot_usb]-")
        self.bypasser.bypass_dev_boot_usb()


    def bypass_rec_mode(self):
        """Bypass the rec mode firmware logic to boot USB."""
        logging.info("-[bypass_rec_mode]-")
        self.bypasser.bypass_rec_mode()


    def trigger_dev_to_rec(self):
        """Trigger to the rec mode from the dev screen."""
        self.bypasser.trigger_dev_to_rec()


    def trigger_rec_to_dev(self):
        """Trigger to the dev mode from the rec screen."""
        self.bypasser.trigger_rec_to_dev()


    def trigger_dev_to_normal(self):
        """Trigger to the normal mode from the dev screen."""
        self.bypasser.trigger_dev_to_normal()


    def wait_for_client(self, timeout=180):
        """Wait for the client to come back online.

        New remote processes will be launched if their used flags are enabled.

        @param timeout: Time in seconds to wait for the client SSH daemon to
                        come up.
        @raise ConnectionError: Failed to connect DUT.
        """
        logging.info("-[FAFT]-[ start wait_for_client ]---")
        # Wait for the system to respond to ping before attempting ssh
        if not self.client_host.ping_wait_up(timeout):
            logging.warning("-[FAFT]-[ system did not respond to ping ]")
        if self.client_host.wait_up(timeout):
            # Check the FAFT client is avaiable.
            self.faft_client.system.is_available()
            # Stop update-engine as it may change firmware/kernel.
            self.faft_framework.faft_client.updater.stop_daemon()
        else:
            logging.error('wait_for_client() timed out.')
            power_state = self.faft_framework.get_power_state()
            if power_state:
                raise ConnectionError('DUT is still down unexpectedly.'
                                      ' Power state: %s' % power_state)
            else:
                raise ConnectionError('DUT is still down unexpectedly')
        logging.info("-[FAFT]-[ end wait_for_client ]-----")


    def wait_for_client_offline(self, timeout=60, orig_boot_id=None):
        """Wait for the client to come offline.

        @param timeout: Time in seconds to wait the client to come offline.
        @param orig_boot_id: A string containing the original boot id.
        @raise ConnectionError: Failed to wait DUT offline.
        """
        # When running against panther, we see that sometimes
        # ping_wait_down() does not work correctly. There needs to
        # be some investigation to the root cause.
        # If we sleep for 120s before running get_boot_id(), it
        # does succeed. But if we change this to ping_wait_down()
        # there are implications on the wait time when running
        # commands at the fw screens.
        if not self.client_host.ping_wait_down(timeout):
            if orig_boot_id and self.client_host.get_boot_id() != orig_boot_id:
                logging.warn('Reboot done very quickly.')
                return
            raise ConnectionError('DUT is still up unexpectedly')


class _KeyboardDevSwitcher(_BaseModeSwitcher):
    """Class that switches firmware mode via keyboard combo."""

    FW_BYPASSER_CLASS = _CtrlDBypasser

    def _enable_dev_mode_and_reboot(self):
        """Switch to developer mode and reboot."""
        logging.info("Enabling keyboard controlled developer mode")
        # Rebooting EC with rec mode on. Should power on AP.
        # Plug out USB disk for preventing recovery boot without warning
        self.enable_rec_mode_and_reboot(usb_state='host')
        self.wait_for_client_offline()
        self.bypasser.trigger_rec_to_dev()


    def _enable_normal_mode_and_reboot(self):
        """Switch to normal mode and reboot."""
        logging.info("Disabling keyboard controlled developer mode")
        self._disable_rec_mode_and_reboot()
        self.wait_for_client_offline()
        self.bypasser.trigger_dev_to_normal()


class _JetstreamSwitcher(_BaseModeSwitcher):
    """Class that switches firmware mode in Jetstream devices."""

    FW_BYPASSER_CLASS = _JetstreamBypasser

    def _enable_dev_mode_and_reboot(self):
        """Switch to developer mode and reboot."""
        logging.info("Enabling Jetstream developer mode")
        self.enable_rec_mode_and_reboot(usb_state='host')
        self.wait_for_client_offline()
        self.bypasser.trigger_rec_to_dev()


    def _enable_normal_mode_and_reboot(self):
        """Switch to normal mode and reboot."""
        logging.info("Disabling Jetstream developer mode")
        self.servo.disable_development_mode()
        self.enable_rec_mode_and_reboot(usb_state='host')
        time.sleep(self.faft_config.firmware_screen)
        self._disable_rec_mode_and_reboot(usb_state='host')


class _TabletDetachableSwitcher(_BaseModeSwitcher):
    """Class that switches fw mode in tablets/detachables with fw menu UI."""

    FW_BYPASSER_CLASS = _TabletDetachableBypasser

    def _enable_dev_mode_and_reboot(self):
        """Switch to developer mode and reboot.

        On tablets/ detachables, recovery entered by pressing pwr, vol up
        & vol down buttons for 10s.
           Menu options seen in RECOVERY screen:
                 Enable Developer Mode
                 Show Debug Info
                 Power off*
                 Language
        """
        logging.info('Enabling tablets/detachable recovery mode')
        self.enable_rec_mode_and_reboot(usb_state='host')
        self.wait_for_client_offline()
        self.bypasser.trigger_rec_to_dev()


    def _enable_normal_mode_and_reboot(self):
        """Switch to normal mode and reboot.

           Menu options seen in DEVELOPER WARNING screen:
                 Developer Options
                 Show Debug Info
                 Enable Root Verification
                 Power Off*
                 Language
           Menu options seen in TO_NORM screen:
                 Confirm Enabling Verified Boot
                 Cancel
                 Power off*
                 Language
        Vol up button selects previous item, vol down button selects
        next item and pwr button selects current activated item.
        """
        self._disable_rec_mode_and_reboot()
        self.wait_for_client_offline()
        self.bypasser.trigger_dev_to_normal()

    def bypass_dev_default_boot(self):
        """Accept the default boot device from the Developer Options screen."""
        self.bypasser.bypass_dev_default_boot()


_SWITCHER_CLASSES = {
    'keyboard_dev_switcher': _KeyboardDevSwitcher,
    'jetstream_switcher': _JetstreamSwitcher,
    'tablet_detachable_switcher': _TabletDetachableSwitcher}


def create_mode_switcher(faft_framework):
    """Creates a proper mode switcher.

    @param faft_framework: The main FAFT framework object.
    """
    switcher_type = faft_framework.faft_config.mode_switcher_type
    switcher_class = _SWITCHER_CLASSES.get(switcher_type, None)
    if switcher_class is None:
        raise NotImplementedError('Not supported mode_switcher_type: %s',
                                  switcher_type)
    else:
        return switcher_class(faft_framework)