| # Copyright (c) 2013 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import datetime |
| import errno |
| import logging |
| import os |
| import re |
| import signal |
| import stat |
| import time |
| |
| import common |
| |
| from autotest_lib.client.bin import utils as client_utils |
| from autotest_lib.client.common_lib import android_utils |
| from autotest_lib.client.common_lib import error |
| from autotest_lib.client.common_lib import global_config |
| from autotest_lib.client.common_lib.cros import retry |
| from autotest_lib.server import constants as server_constants |
| from autotest_lib.server import utils |
| from autotest_lib.server.cros.dynamic_suite import constants |
| from autotest_lib.server.hosts import abstract_ssh |
| from autotest_lib.server.hosts import adb_label |
| from autotest_lib.server.hosts import base_label |
| from autotest_lib.server.hosts import teststation_host |
| |
| |
| CONFIG = global_config.global_config |
| |
| ADB_CMD = 'adb' |
| FASTBOOT_CMD = 'fastboot' |
| SHELL_CMD = 'shell' |
| # Some devices have no serial, then `adb serial` has output such as: |
| # (no serial number) device |
| # ?????????? device |
| DEVICE_NO_SERIAL_MSG = '(no serial number)' |
| DEVICE_NO_SERIAL_TAG = '<NO_SERIAL>' |
| # Regex to find an adb device. Examples: |
| # 0146B5580B01801B device |
| # 018e0ecb20c97a62 device |
| # 172.22.75.141:5555 device |
| # localhost:22 device |
| DEVICE_FINDER_REGEX = (r'^(?P<SERIAL>([\w-]+)|((tcp:)?' + |
| '\d{1,3}.\d{1,3}.\d{1,3}.\d{1,3}([:]5555)?)|' + |
| '((tcp:)?localhost([:]22)?)|' + |
| re.escape(DEVICE_NO_SERIAL_MSG) + |
| r')[ \t]+(?:device|fastboot)') |
| CMD_OUTPUT_PREFIX = 'ADB_CMD_OUTPUT' |
| CMD_OUTPUT_REGEX = ('(?P<OUTPUT>[\s\S]*)%s:(?P<EXIT_CODE>\d{1,3})' % |
| CMD_OUTPUT_PREFIX) |
| RELEASE_FILE = 'ro.build.version.release' |
| BOARD_FILE = 'ro.product.device' |
| SDK_FILE = 'ro.build.version.sdk' |
| LOGCAT_FILE_FMT = 'logcat_%s.log' |
| TMP_DIR = '/data/local/tmp' |
| # Regex to pull out file type, perms and symlink. Example: |
| # lrwxrwx--- 1 6 root system 2015-09-12 19:21 blah_link -> ./blah |
| FILE_INFO_REGEX = '^(?P<TYPE>[dl-])(?P<PERMS>[rwx-]{9})' |
| FILE_SYMLINK_REGEX = '^.*-> (?P<SYMLINK>.+)' |
| # List of the perm stats indexed by the order they are listed in the example |
| # supplied above. |
| FILE_PERMS_FLAGS = [stat.S_IRUSR, stat.S_IWUSR, stat.S_IXUSR, |
| stat.S_IRGRP, stat.S_IWGRP, stat.S_IXGRP, |
| stat.S_IROTH, stat.S_IWOTH, stat.S_IXOTH] |
| |
| # Default maximum number of seconds to wait for a device to be down. |
| DEFAULT_WAIT_DOWN_TIME_SECONDS = 10 |
| # Default maximum number of seconds to wait for a device to be up. |
| DEFAULT_WAIT_UP_TIME_SECONDS = 300 |
| |
| # Default timeout for retrying adb/fastboot command. |
| DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS = 10 |
| |
| OS_TYPE_ANDROID = 'android' |
| OS_TYPE_BRILLO = 'brillo' |
| |
| ADB_DEVICE_PREFIXES = ['product:', 'model:', 'device:'] |
| |
| # Default permissions for files/dirs copied from the device. |
| _DEFAULT_FILE_PERMS = 0o600 |
| _DEFAULT_DIR_PERMS = 0o700 |
| |
| # Constants for getprop return value for a given property. |
| PROPERTY_VALUE_TRUE = '1' |
| |
| # Timeout used for retrying installing apk. After reinstall apk failed, we try |
| # to reboot the device and try again. |
| APK_INSTALL_TIMEOUT_MIN = 5 |
| |
| # The amount of time to wait for package verification to be turned off. |
| DISABLE_PACKAGE_VERIFICATION_TIMEOUT_MIN = 1 |
| |
| # Directory where (non-Brillo) Android stores tombstone crash logs. |
| ANDROID_TOMBSTONE_CRASH_LOG_DIR = '/data/tombstones' |
| # Directory where Brillo stores crash logs for native (non-Java) crashes. |
| BRILLO_NATIVE_CRASH_LOG_DIR = '/data/misc/crash_reporter/crash' |
| |
| # A specific string value to return when a timeout has occurred. |
| TIMEOUT_MSG = 'TIMEOUT_OCCURRED' |
| |
| class ADBHost(abstract_ssh.AbstractSSHHost): |
| """This class represents a host running an ADB server.""" |
| |
| @staticmethod |
| def check_host(host, timeout=10): |
| """ |
| Check if the given host is an adb host. |
| |
| If SSH connectivity can't be established, check_host will try to use |
| user 'adb' as well. If SSH connectivity still can't be established |
| then the original SSH user is restored. |
| |
| @param host: An ssh host representing a device. |
| @param timeout: The timeout for the run command. |
| |
| |
| @return: True if the host device has adb. |
| |
| @raises AutoservRunError: If the command failed. |
| @raises AutoservSSHTimeout: Ssh connection has timed out. |
| """ |
| # host object may not have user attribute if it's a LocalHost object. |
| current_user = host.user if hasattr(host, 'user') else None |
| try: |
| if not (host.hostname == 'localhost' or |
| host.verify_ssh_user_access()): |
| host.user = 'adb' |
| result = host.run( |
| 'test -f %s' % server_constants.ANDROID_TESTER_FILEFLAG, |
| timeout=timeout) |
| except (error.GenericHostRunError, error.AutoservSSHTimeout): |
| if current_user is not None: |
| host.user = current_user |
| return False |
| return result.exit_status == 0 |
| |
| |
| def _initialize(self, hostname='localhost', serials=None, |
| adb_serial=None, fastboot_serial=None, |
| teststation=None, *args, **dargs): |
| """Initialize an ADB Host. |
| |
| This will create an ADB Host. Hostname should always refer to the |
| test station connected to an Android DUT. This will be the DUT |
| to test with. If there are multiple, serial must be specified or an |
| exception will be raised. |
| |
| @param hostname: Hostname of the machine running ADB. |
| @param serials: DEPRECATED (to be removed) |
| @param adb_serial: An ADB device serial. If None, assume a single |
| device is attached (and fail otherwise). |
| @param fastboot_serial: A fastboot device serial. If None, defaults to |
| the ADB serial (or assumes a single device if |
| the latter is None). |
| @param teststation: The teststation object ADBHost should use. |
| """ |
| # Sets up the is_client_install_supported field. |
| super(ADBHost, self)._initialize(hostname=hostname, |
| is_client_install_supported=False, |
| *args, **dargs) |
| |
| self.tmp_dirs = [] |
| self.labels = base_label.LabelRetriever(adb_label.ADB_LABELS) |
| adb_serial = adb_serial or self._afe_host.attributes.get('serials') |
| fastboot_serial = (fastboot_serial or |
| self._afe_host.attributes.get('fastboot_serial')) |
| |
| self.adb_serial = adb_serial |
| if adb_serial: |
| adb_prefix = any(adb_serial.startswith(p) |
| for p in ADB_DEVICE_PREFIXES) |
| self.fastboot_serial = (fastboot_serial or |
| ('tcp:%s' % adb_serial.split(':')[0] if |
| ':' in adb_serial and not adb_prefix else adb_serial)) |
| self._use_tcpip = ':' in adb_serial and not adb_prefix |
| else: |
| self.fastboot_serial = fastboot_serial or adb_serial |
| self._use_tcpip = False |
| self.teststation = (teststation if teststation |
| else teststation_host.create_teststationhost( |
| hostname=hostname, |
| user=self.user, |
| password=self.password, |
| port=self.port |
| )) |
| |
| msg ='Initializing ADB device on host: %s' % hostname |
| if self.adb_serial: |
| msg += ', ADB serial: %s' % self.adb_serial |
| if self.fastboot_serial: |
| msg += ', fastboot serial: %s' % self.fastboot_serial |
| logging.debug(msg) |
| |
| self._os_type = None |
| |
| |
| def _connect_over_tcpip_as_needed(self): |
| """Connect to the ADB device over TCP/IP if so configured.""" |
| if not self._use_tcpip: |
| return |
| logging.debug('Connecting to device over TCP/IP') |
| self.adb_run('connect %s' % self.adb_serial) |
| |
| |
| def _restart_adbd_with_root_permissions(self): |
| """Restarts the adb daemon with root permissions.""" |
| @retry.retry(error.GenericHostRunError, timeout_min=20/60.0, |
| delay_sec=1) |
| def run_adb_root(): |
| """Run command `adb root`.""" |
| self.adb_run('root') |
| |
| # adb command may flake with error "device not found". Retry the root |
| # command to reduce the chance of flake. |
| run_adb_root() |
| # TODO(ralphnathan): Remove this sleep once b/19749057 is resolved. |
| time.sleep(1) |
| self._connect_over_tcpip_as_needed() |
| self.adb_run('wait-for-device') |
| |
| |
| def _set_tcp_port(self): |
| """Ensure the device remains in tcp/ip mode after a reboot.""" |
| if not self._use_tcpip: |
| return |
| port = self.adb_serial.split(':')[-1] |
| self.run('setprop persist.adb.tcp.port %s' % port) |
| |
| |
| def _reset_adbd_connection(self): |
| """Resets adbd connection to the device after a reboot/initialization""" |
| self._connect_over_tcpip_as_needed() |
| self._restart_adbd_with_root_permissions() |
| self._set_tcp_port() |
| |
| |
| # pylint: disable=missing-docstring |
| def adb_run(self, command, **kwargs): |
| """Runs an adb command. |
| |
| This command will launch on the test station. |
| |
| Refer to _device_run method for docstring for parameters. |
| """ |
| # Suppresses 'adb devices' from printing to the logs, which often |
| # causes large log files. |
| if command == "devices": |
| kwargs['verbose'] = False |
| return self._device_run(ADB_CMD, command, **kwargs) |
| |
| |
| # pylint: disable=missing-docstring |
| def fastboot_run(self, command, **kwargs): |
| """Runs an fastboot command. |
| |
| This command will launch on the test station. |
| |
| Refer to _device_run method for docstring for parameters. |
| """ |
| return self._device_run(FASTBOOT_CMD, command, **kwargs) |
| |
| |
| def _log_adb_pid(self): |
| """Log the pid of adb server. |
| |
| adb's server is known to have bugs and randomly restart. BY logging |
| the server's pid it will allow us to better debug random adb failures. |
| """ |
| adb_pid = self.teststation.run('pgrep -f "adb.*server"') |
| logging.debug('ADB Server PID: %s', adb_pid.stdout) |
| |
| |
| def _device_run(self, function, command, shell=False, |
| timeout=3600, ignore_status=False, ignore_timeout=False, |
| stdout=utils.TEE_TO_LOGS, stderr=utils.TEE_TO_LOGS, |
| connect_timeout=30, options='', stdin=None, verbose=True, |
| require_sudo=False, args=()): |
| """Runs a command named `function` on the test station. |
| |
| This command will launch on the test station. |
| |
| @param command: Command to run. |
| @param shell: If true the command runs in the adb shell otherwise if |
| False it will be passed directly to adb. For example |
| reboot with shell=False will call 'adb reboot'. This |
| option only applies to function adb. |
| @param timeout: Time limit in seconds before attempting to |
| kill the running process. The run() function |
| will take a few seconds longer than 'timeout' |
| to complete if it has to kill the process. |
| @param ignore_status: Do not raise an exception, no matter |
| what the exit code of the command is. |
| @param ignore_timeout: Bool True if command timeouts should be |
| ignored. Will return None on command timeout. |
| @param stdout: Redirect stdout. |
| @param stderr: Redirect stderr. |
| @param connect_timeout: Connection timeout (in seconds) |
| @param options: String with additional ssh command options |
| @param stdin: Stdin to pass (a string) to the executed command |
| @param require_sudo: True to require sudo to run the command. Default is |
| False. |
| @param args: Sequence of strings to pass as arguments to command by |
| quoting them in " and escaping their contents if |
| necessary. |
| |
| @returns a CMDResult object. |
| """ |
| if function == ADB_CMD: |
| serial = self.adb_serial |
| elif function == FASTBOOT_CMD: |
| serial = self.fastboot_serial |
| else: |
| raise NotImplementedError('Mode %s is not supported' % function) |
| |
| if function != ADB_CMD and shell: |
| raise error.CmdError('shell option is only applicable to `adb`.') |
| |
| client_side_cmd = 'timeout --signal=%d %d %s' % (signal.SIGKILL, |
| timeout + 1, function) |
| cmd = '%s%s ' % ('sudo -n ' if require_sudo else '', client_side_cmd) |
| |
| if serial: |
| cmd += '-s %s ' % serial |
| |
| if shell: |
| cmd += '%s ' % SHELL_CMD |
| cmd += command |
| |
| self._log_adb_pid() |
| |
| if verbose: |
| logging.debug('Command: %s', cmd) |
| |
| return self.teststation.run(cmd, timeout=timeout, |
| ignore_status=ignore_status, |
| ignore_timeout=ignore_timeout, stdout_tee=stdout, |
| stderr_tee=stderr, options=options, stdin=stdin, |
| connect_timeout=connect_timeout, args=args) |
| |
| |
| def _run_output_with_retry(self, cmd): |
| """Call run_output method for the given command with retry. |
| |
| adb command can be flaky some time, and the command may fail or return |
| empty string. It may take several retries until a value can be returned. |
| |
| @param cmd: The command to run. |
| |
| @return: Return value from the command after retry. |
| """ |
| try: |
| return client_utils.poll_for_condition( |
| lambda: self.run_output(cmd, ignore_status=True), |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| sleep_interval=0.5, |
| desc='Get return value for command `%s`' % cmd) |
| except client_utils.TimeoutError: |
| return '' |
| |
| |
| def get_product_name(self): |
| """Get the product name of the device, eg., shamu, bat""" |
| return self.run_output('getprop %s' % BOARD_FILE) |
| |
| def get_board_name(self): |
| """Get the name of the board, e.g., shamu, bat_land etc. |
| """ |
| product = self.get_product_name() |
| return android_utils.AndroidAliases.get_board_name(product) |
| |
| |
| def get_board(self): |
| """Determine the correct board label for the device. |
| |
| @returns a string representing this device's board. |
| """ |
| board = self.get_board_name() |
| board_os = self.get_os_type() |
| return constants.BOARD_PREFIX + '-'.join([board_os, board]) |
| |
| |
| def job_start(self): |
| """Overload of parent which intentionally doesn't log certain files. |
| |
| The parent implementation attempts to log certain Linux files, such as |
| /var/log, which do not exist on Android, thus there is no call to the |
| parent's job_start(). The sync call is made so that logcat logs can be |
| approximately matched to server logs. |
| """ |
| # Try resetting the ADB daemon on the device, however if we are |
| # creating the host to do a repair job, the device maybe inaccesible |
| # via ADB. |
| try: |
| self._reset_adbd_connection() |
| except error.GenericHostRunError as e: |
| logging.error('Unable to reset the device adb daemon connection: ' |
| '%s.', e) |
| |
| if self.is_up(): |
| self._sync_time() |
| self._enable_native_crash_logging() |
| |
| |
| def run(self, command, timeout=3600, ignore_status=False, |
| ignore_timeout=False, stdout_tee=utils.TEE_TO_LOGS, |
| stderr_tee=utils.TEE_TO_LOGS, connect_timeout=30, options='', |
| stdin=None, verbose=True, args=()): |
| """Run a command on the adb device. |
| |
| The command given will be ran directly on the adb device; for example |
| 'ls' will be ran as: 'abd shell ls' |
| |
| @param command: The command line string. |
| @param timeout: Time limit in seconds before attempting to |
| kill the running process. The run() function |
| will take a few seconds longer than 'timeout' |
| to complete if it has to kill the process. |
| @param ignore_status: Do not raise an exception, no matter |
| what the exit code of the command is. |
| @param ignore_timeout: Bool True if command timeouts should be |
| ignored. Will return None on command timeout. |
| @param stdout_tee: Redirect stdout. |
| @param stderr_tee: Redirect stderr. |
| @param connect_timeout: Connection timeout (in seconds). |
| @param options: String with additional ssh command options. |
| @param stdin: Stdin to pass (a string) to the executed command |
| @param args: Sequence of strings to pass as arguments to command by |
| quoting them in " and escaping their contents if |
| necessary. |
| |
| @returns A CMDResult object or None if the call timed out and |
| ignore_timeout is True. |
| |
| @raises AutoservRunError: If the command failed. |
| @raises AutoservSSHTimeout: Ssh connection has timed out. |
| """ |
| command = ('"%s; echo %s:\$?"' % |
| (utils.sh_escape(command), CMD_OUTPUT_PREFIX)) |
| |
| def _run(): |
| """Run the command and try to parse the exit code. |
| """ |
| result = self.adb_run( |
| command, shell=True, timeout=timeout, |
| ignore_status=ignore_status, ignore_timeout=ignore_timeout, |
| stdout=stdout_tee, stderr=stderr_tee, |
| connect_timeout=connect_timeout, options=options, |
| stdin=stdin, verbose=verbose, args=args) |
| if not result: |
| # In case of timeouts. Set the return to a specific string |
| # value. That way the caller of poll_for_condition knows |
| # a timeout occurs and should return None. Return None here will |
| # lead to the command to be retried. |
| return TIMEOUT_MSG |
| parse_output = re.match(CMD_OUTPUT_REGEX, result.stdout) |
| if not parse_output and not ignore_status: |
| logging.error('Failed to parse the exit code for command: `%s`.' |
| ' result: `%s`', command, result.stdout) |
| return None |
| elif parse_output: |
| result.stdout = parse_output.group('OUTPUT') |
| result.exit_status = int(parse_output.group('EXIT_CODE')) |
| if result.exit_status != 0 and not ignore_status: |
| raise error.AutoservRunError(command, result) |
| return result |
| |
| result = client_utils.poll_for_condition( |
| lambda: _run(), |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| sleep_interval=0.5, |
| desc='Run command `%s`' % command) |
| return None if result == TIMEOUT_MSG else result |
| |
| |
| def check_boot_to_adb_complete(self, exception_type=error.TimeoutException): |
| """Check if the device has finished booting and accessible by adb. |
| |
| @param exception_type: Type of exception to raise. Default is set to |
| error.TimeoutException for retry. |
| |
| @raise exception_type: If the device has not finished booting yet, raise |
| an exception of type `exception_type`. |
| """ |
| bootcomplete = self._run_output_with_retry('getprop dev.bootcomplete') |
| if bootcomplete != PROPERTY_VALUE_TRUE: |
| raise exception_type('dev.bootcomplete is %s.' % bootcomplete) |
| if self.get_os_type() == OS_TYPE_ANDROID: |
| boot_completed = self._run_output_with_retry( |
| 'getprop sys.boot_completed') |
| if boot_completed != PROPERTY_VALUE_TRUE: |
| raise exception_type('sys.boot_completed is %s.' % |
| boot_completed) |
| |
| |
| def wait_up(self, timeout=DEFAULT_WAIT_UP_TIME_SECONDS, command=ADB_CMD): |
| """Wait until the remote host is up or the timeout expires. |
| |
| Overrides wait_down from AbstractSSHHost. |
| |
| @param timeout: Time limit in seconds before returning even if the host |
| is not up. |
| @param command: The command used to test if a device is up, i.e., |
| accessible by the given command. Default is set to `adb`. |
| |
| @returns True if the host was found to be up before the timeout expires, |
| False otherwise. |
| """ |
| @retry.retry(error.TimeoutException, timeout_min=timeout/60.0, |
| delay_sec=1) |
| def _wait_up(): |
| if not self.is_up(command=command): |
| raise error.TimeoutException('Device is still down.') |
| if command == ADB_CMD: |
| self.check_boot_to_adb_complete() |
| return True |
| |
| try: |
| _wait_up() |
| logging.debug('Host %s is now up, and can be accessed by %s.', |
| self.hostname, command) |
| return True |
| except error.TimeoutException: |
| logging.debug('Host %s is still down after waiting %d seconds', |
| self.hostname, timeout) |
| return False |
| |
| |
| def wait_down(self, timeout=DEFAULT_WAIT_DOWN_TIME_SECONDS, |
| warning_timer=None, old_boot_id=None, command=ADB_CMD, |
| boot_id=None): |
| """Wait till the host goes down. |
| |
| Return when the host is down (not accessible via the command) OR when |
| the device's boot_id changes (if a boot_id was provided). |
| |
| Overrides wait_down from AbstractSSHHost. |
| |
| @param timeout: Time in seconds to wait for the host to go down. |
| @param warning_timer: Time limit in seconds that will generate |
| a warning if the host is not down yet. |
| Currently ignored. |
| @param old_boot_id: Not applicable for adb_host. |
| @param command: `adb`, test if the device can be accessed by adb |
| command, or `fastboot`, test if the device can be accessed by |
| fastboot command. Default is set to `adb`. |
| @param boot_id: UUID of previous boot (consider the device down when the |
| boot_id changes from this value). Ignored if None. |
| |
| @returns True if the device goes down before the timeout, False |
| otherwise. |
| """ |
| @retry.retry(error.TimeoutException, timeout_min=timeout/60.0, |
| delay_sec=1) |
| def _wait_down(): |
| up = self.is_up(command=command) |
| if not up: |
| return True |
| if boot_id: |
| try: |
| new_boot_id = self.get_boot_id() |
| if new_boot_id != boot_id: |
| return True |
| except error.GenericHostRunError: |
| pass |
| raise error.TimeoutException('Device is still up.') |
| |
| try: |
| _wait_down() |
| logging.debug('Host %s is now down', self.hostname) |
| return True |
| except error.TimeoutException: |
| logging.debug('Host %s is still up after waiting %d seconds', |
| self.hostname, timeout) |
| return False |
| |
| |
| def reboot(self): |
| """Reboot the android device via adb. |
| |
| @raises AutoservRebootError if reboot failed. |
| """ |
| # Not calling super.reboot() as we want to reboot the ADB device not |
| # the test station we are running ADB on. |
| boot_id = self.get_boot_id() |
| self.adb_run('reboot', timeout=10, ignore_timeout=True) |
| if not self.wait_down(boot_id=boot_id): |
| raise error.AutoservRebootError( |
| 'ADB Device %s is still up after reboot' % self.adb_serial) |
| if not self.wait_up(): |
| raise error.AutoservRebootError( |
| 'ADB Device %s failed to return from reboot.' % |
| self.adb_serial) |
| self._reset_adbd_connection() |
| |
| |
| def fastboot_reboot(self): |
| """Do a fastboot reboot to go back to adb. |
| |
| @raises AutoservRebootError if reboot failed. |
| """ |
| self.fastboot_run('reboot') |
| if not self.wait_down(command=FASTBOOT_CMD): |
| raise error.AutoservRebootError( |
| 'Device %s is still in fastboot mode after reboot' % |
| self.fastboot_serial) |
| if not self.wait_up(): |
| raise error.AutoservRebootError( |
| 'Device %s failed to boot to adb after fastboot reboot.' % |
| self.adb_serial) |
| self._reset_adbd_connection() |
| |
| |
| def remount(self): |
| """Remounts paritions on the device read-write. |
| |
| Specifically, the /system, /vendor (if present) and /oem (if present) |
| partitions on the device are remounted read-write. |
| """ |
| self.adb_run('remount') |
| |
| |
| @staticmethod |
| def parse_device_serials(devices_output): |
| """Return a list of parsed serials from the output. |
| |
| @param devices_output: Output from either an adb or fastboot command. |
| |
| @returns List of device serials |
| """ |
| devices = [] |
| for line in devices_output.splitlines(): |
| match = re.search(DEVICE_FINDER_REGEX, line) |
| if match: |
| serial = match.group('SERIAL') |
| if serial == DEVICE_NO_SERIAL_MSG or re.match(r'^\?+$', serial): |
| serial = DEVICE_NO_SERIAL_TAG |
| logging.debug('Found Device: %s', serial) |
| devices.append(serial) |
| return devices |
| |
| |
| def _get_devices(self, use_adb): |
| """Get a list of devices currently attached to the test station. |
| |
| @params use_adb: True to get adb accessible devices. Set to False to |
| get fastboot accessible devices. |
| |
| @returns a list of devices attached to the test station. |
| """ |
| if use_adb: |
| result = self.adb_run('devices').stdout |
| if self.adb_serial and self.adb_serial not in result: |
| self._connect_over_tcpip_as_needed() |
| else: |
| result = self.fastboot_run('devices').stdout |
| if (self.fastboot_serial and |
| self.fastboot_serial not in result): |
| # fastboot devices won't list the devices using TCP |
| try: |
| if 'product' in self.fastboot_run('getvar product', |
| timeout=2).stderr: |
| result += '\n%s\tfastboot' % self.fastboot_serial |
| # The main reason we do a general Exception catch here instead |
| # of setting ignore_timeout/status to True is because even when |
| # the fastboot process has been nuked, it still stays around and |
| # so bgjob wants to warn us of this and tries to read the |
| # /proc/<pid>/stack file which then promptly returns an |
| # 'Operation not permitted' error since we're running as moblab |
| # and we don't have permission to read those files. |
| except Exception: |
| pass |
| return self.parse_device_serials(result) |
| |
| |
| def adb_devices(self): |
| """Get a list of devices currently attached to the test station and |
| accessible with the adb command.""" |
| devices = self._get_devices(use_adb=True) |
| if self.adb_serial is None and len(devices) > 1: |
| raise error.AutoservError( |
| 'Not given ADB serial but multiple devices detected') |
| return devices |
| |
| |
| def fastboot_devices(self): |
| """Get a list of devices currently attached to the test station and |
| accessible by fastboot command. |
| """ |
| devices = self._get_devices(use_adb=False) |
| if self.fastboot_serial is None and len(devices) > 1: |
| raise error.AutoservError( |
| 'Not given fastboot serial but multiple devices detected') |
| return devices |
| |
| |
| def is_up(self, timeout=0, command=ADB_CMD): |
| """Determine if the specified adb device is up with expected mode. |
| |
| @param timeout: Not currently used. |
| @param command: `adb`, the device can be accessed by adb command, |
| or `fastboot`, the device can be accessed by fastboot command. |
| Default is set to `adb`. |
| |
| @returns True if the device is detectable by given command, False |
| otherwise. |
| |
| """ |
| if command == ADB_CMD: |
| devices = self.adb_devices() |
| serial = self.adb_serial |
| # ADB has a device state, if the device is not online, no |
| # subsequent ADB command will complete. |
| # DUT with single device connected may not have adb_serial set. |
| # Therefore, skip checking if serial is in the list of adb devices |
| # if self.adb_serial is not set. |
| if (serial and serial not in devices) or not self.is_device_ready(): |
| logging.debug('Waiting for device to enter the ready state.') |
| return False |
| elif command == FASTBOOT_CMD: |
| devices = self.fastboot_devices() |
| serial = self.fastboot_serial |
| else: |
| raise NotImplementedError('Mode %s is not supported' % command) |
| |
| return bool(devices and (not serial or serial in devices)) |
| |
| |
| def stop_loggers(self): |
| """Inherited stop_loggers function. |
| |
| Calls parent function and captures logcat, since the end of the run |
| is logically the end/stop of the logcat log. |
| """ |
| super(ADBHost, self).stop_loggers() |
| |
| # When called from atest and tools like it there will be no job. |
| if not self.job: |
| return |
| |
| # Record logcat log to a temporary file on the teststation. |
| tmp_dir = self.teststation.get_tmp_dir() |
| logcat_filename = LOGCAT_FILE_FMT % self.adb_serial |
| teststation_filename = os.path.join(tmp_dir, logcat_filename) |
| try: |
| self.adb_run('logcat -v time -d > "%s"' % (teststation_filename), |
| timeout=20) |
| except (error.GenericHostRunError, error.AutoservSSHTimeout, |
| error.CmdTimeoutError): |
| return |
| # Copy-back the log to the drone's results directory. |
| results_logcat_filename = os.path.join(self.job.resultdir, |
| logcat_filename) |
| self.teststation.get_file(teststation_filename, |
| results_logcat_filename) |
| try: |
| self.teststation.run('rm -rf %s' % tmp_dir) |
| except (error.GenericHostRunError, error.AutoservSSHTimeout) as e: |
| logging.warn('failed to remove dir %s: %s', tmp_dir, e) |
| |
| self._collect_crash_logs() |
| |
| |
| def close(self): |
| """Close the ADBHost object. |
| |
| Called as the test ends. Will return the device to USB mode and kill |
| the ADB server. |
| """ |
| super(ADBHost, self).close() |
| self.teststation.close() |
| |
| |
| def syslog(self, message, tag='autotest'): |
| """Logs a message to syslog on the device. |
| |
| @param message String message to log into syslog |
| @param tag String tag prefix for syslog |
| |
| """ |
| self.run('log -t "%s" "%s"' % (tag, message)) |
| |
| |
| def get_autodir(self): |
| """Return the directory to install autotest for client side tests.""" |
| return '/data/autotest' |
| |
| |
| def is_device_ready(self): |
| """Return the if the device is ready for ADB commands.""" |
| try: |
| # Retry to avoid possible flakes. |
| is_ready = client_utils.poll_for_condition( |
| lambda: self.adb_run('get-state').stdout.strip() == 'device', |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, sleep_interval=1, |
| desc='Waiting for device state to be `device`') |
| except client_utils.TimeoutError: |
| is_ready = False |
| |
| logging.debug('Device state is %sready', '' if is_ready else 'NOT ') |
| return is_ready |
| |
| |
| def send_file(self, source, dest, delete_dest=False, |
| preserve_symlinks=False, excludes=None): |
| """Copy files from the drone to the device. |
| |
| Just a note, there is the possibility the test station is localhost |
| which makes some of these steps redundant (e.g. creating tmp dir) but |
| that scenario will undoubtedly be a development scenario (test station |
| is also the moblab) and not the typical live test running scenario so |
| the redundancy I think is harmless. |
| |
| @param source: The file/directory on the drone to send to the device. |
| @param dest: The destination path on the device to copy to. |
| @param delete_dest: A flag set to choose whether or not to delete |
| dest on the device if it exists. |
| @param preserve_symlinks: Controls if symlinks on the source will be |
| copied as such on the destination or |
| transformed into the referenced |
| file/directory. |
| @param excludes: A list of file pattern that matches files not to be |
| sent. `send_file` will fail if exclude is set, since |
| local copy does not support --exclude, e.g., when |
| using scp to copy file. |
| """ |
| # If we need to preserve symlinks, let's check if the source is a |
| # symlink itself and if so, just create it on the device. |
| if preserve_symlinks: |
| symlink_target = None |
| try: |
| symlink_target = os.readlink(source) |
| except OSError: |
| # Guess it's not a symlink. |
| pass |
| |
| if symlink_target is not None: |
| # Once we create the symlink, let's get out of here. |
| self.run('ln -s %s %s' % (symlink_target, dest)) |
| return |
| |
| # Stage the files on the test station. |
| tmp_dir = self.teststation.get_tmp_dir() |
| src_path = os.path.join(tmp_dir, os.path.basename(dest)) |
| # Now copy the file over to the test station so you can reference the |
| # file in the push command. |
| self.teststation.send_file( |
| source, src_path, preserve_symlinks=preserve_symlinks, |
| excludes=excludes) |
| |
| if delete_dest: |
| self.run('rm -rf %s' % dest) |
| |
| self.adb_run('push %s %s' % (src_path, dest)) |
| |
| # Cleanup the test station. |
| try: |
| self.teststation.run('rm -rf %s' % tmp_dir) |
| except (error.GenericHostRunError, error.AutoservSSHTimeout) as e: |
| logging.warn('failed to remove dir %s: %s', tmp_dir, e) |
| |
| |
| def _get_file_info(self, dest): |
| """Get permission and possible symlink info about file on the device. |
| |
| These files are on the device so we only have shell commands (via adb) |
| to get the info we want. We'll use 'ls' to get it all. |
| |
| @param dest: File to get info about. |
| |
| @returns a dict of the file permissions and symlink. |
| """ |
| # Grab file info. |
| file_info = self.run_output('ls -ld %s' % dest) |
| symlink = None |
| perms = 0 |
| match = re.match(FILE_INFO_REGEX, file_info) |
| if match: |
| # Check if it's a symlink and grab the linked dest if it is. |
| if match.group('TYPE') == 'l': |
| symlink_match = re.match(FILE_SYMLINK_REGEX, file_info) |
| if symlink_match: |
| symlink = symlink_match.group('SYMLINK') |
| |
| # Set the perms. |
| for perm, perm_flag in zip(match.group('PERMS'), FILE_PERMS_FLAGS): |
| if perm != '-': |
| perms |= perm_flag |
| |
| return {'perms': perms, |
| 'symlink': symlink} |
| |
| |
| def get_file(self, source, dest, delete_dest=False, preserve_perm=True, |
| preserve_symlinks=False): |
| """Copy files from the device to the drone. |
| |
| Just a note, there is the possibility the test station is localhost |
| which makes some of these steps redundant (e.g. creating tmp dir) but |
| that scenario will undoubtedly be a development scenario (test station |
| is also the moblab) and not the typical live test running scenario so |
| the redundancy I think is harmless. |
| |
| @param source: The file/directory on the device to copy back to the |
| drone. |
| @param dest: The destination path on the drone to copy to. |
| @param delete_dest: A flag set to choose whether or not to delete |
| dest on the drone if it exists. |
| @param preserve_perm: Tells get_file() to try to preserve the sources |
| permissions on files and dirs. |
| @param preserve_symlinks: Try to preserve symlinks instead of |
| transforming them into files/dirs on copy. |
| """ |
| # Stage the files on the test station under teststation_temp_dir. |
| teststation_temp_dir = self.teststation.get_tmp_dir() |
| teststation_dest = os.path.join(teststation_temp_dir, |
| os.path.basename(source)) |
| |
| source_info = {} |
| if preserve_symlinks or preserve_perm: |
| source_info = self._get_file_info(source) |
| |
| # If we want to preserve symlinks, just create it here, otherwise pull |
| # the file off the device. |
| # |
| # TODO(sadmac): Directories containing symlinks won't behave as |
| # expected. |
| if preserve_symlinks and source_info['symlink']: |
| os.symlink(source_info['symlink'], dest) |
| else: |
| self.adb_run('pull %s %s' % (source, teststation_temp_dir)) |
| |
| # Copy over the file from the test station and clean up. |
| self.teststation.get_file(teststation_dest, dest, |
| delete_dest=delete_dest) |
| try: |
| self.teststation.run('rm -rf %s' % teststation_temp_dir) |
| except (error.GenericHostRunError, error.AutoservSSHTimeout) as e: |
| logging.warn('failed to remove dir %s: %s', |
| teststation_temp_dir, e) |
| |
| # Source will be copied under dest if either: |
| # 1. Source is a directory and doesn't end with /. |
| # 2. Source is a file and dest is a directory. |
| command = '[ -d %s ]' % source |
| source_is_dir = self.run(command, |
| ignore_status=True).exit_status == 0 |
| logging.debug('%s on the device %s a directory', source, |
| 'is' if source_is_dir else 'is not') |
| |
| if ((source_is_dir and not source.endswith(os.sep)) or |
| (not source_is_dir and os.path.isdir(dest))): |
| receive_path = os.path.join(dest, os.path.basename(source)) |
| else: |
| receive_path = dest |
| |
| if not os.path.exists(receive_path): |
| logging.warning('Expected file %s does not exist; skipping' |
| ' permissions copy', receive_path) |
| return |
| |
| # Set the permissions of the received file/dirs. |
| if os.path.isdir(receive_path): |
| for root, _dirs, files in os.walk(receive_path): |
| def process(rel_path, default_perm): |
| info = self._get_file_info(os.path.join(source, |
| rel_path)) |
| if info['perms'] != 0: |
| target = os.path.join(receive_path, rel_path) |
| if preserve_perm: |
| os.chmod(target, info['perms']) |
| else: |
| os.chmod(target, default_perm) |
| |
| rel_root = os.path.relpath(root, receive_path) |
| process(rel_root, _DEFAULT_DIR_PERMS) |
| for f in files: |
| process(os.path.join(rel_root, f), _DEFAULT_FILE_PERMS) |
| elif preserve_perm: |
| os.chmod(receive_path, source_info['perms']) |
| else: |
| os.chmod(receive_path, _DEFAULT_FILE_PERMS) |
| |
| |
| def get_release_version(self): |
| """Get the release version from the RELEASE_FILE on the device. |
| |
| @returns The release string in the RELEASE_FILE. |
| |
| """ |
| return self.run_output('getprop %s' % RELEASE_FILE) |
| |
| |
| def get_tmp_dir(self, parent=''): |
| """Return a suitable temporary directory on the device. |
| |
| We ensure this is a subdirectory of /data/local/tmp. |
| |
| @param parent: Parent directory of the returned tmp dir. |
| |
| @returns a path to the temp directory on the host. |
| """ |
| # TODO(kevcheng): Refactor the cleanup of tmp dir to be inherited |
| # from the parent. |
| if not parent.startswith(TMP_DIR): |
| parent = os.path.join(TMP_DIR, parent.lstrip(os.path.sep)) |
| self.run('mkdir -p %s' % parent) |
| tmp_dir = self.run_output('mktemp -d -p %s' % parent) |
| self.tmp_dirs.append(tmp_dir) |
| return tmp_dir |
| |
| |
| def get_platform(self): |
| """Determine the correct platform label for this host. |
| |
| @returns a string representing this host's platform. |
| """ |
| return 'adb' |
| |
| |
| def get_os_type(self): |
| """Get the OS type of the DUT, e.g., android or brillo. |
| """ |
| if not self._os_type: |
| if self.run_output('getprop ro.product.brand') == 'Brillo': |
| self._os_type = OS_TYPE_BRILLO |
| else: |
| self._os_type = OS_TYPE_ANDROID |
| |
| return self._os_type |
| |
| |
| def _forward(self, reverse, args): |
| """Execute a forwarding command. |
| |
| @param reverse: Whether this is reverse forwarding (Boolean). |
| @param args: List of command arguments. |
| """ |
| cmd = '%s %s' % ('reverse' if reverse else 'forward', ' '.join(args)) |
| self.adb_run(cmd) |
| |
| |
| def add_forwarding(self, src, dst, reverse=False, rebind=True): |
| """Forward a port between the ADB host and device. |
| |
| Port specifications are any strings accepted as such by ADB, for |
| example 'tcp:8080'. |
| |
| @param src: Port specification to forward from. |
| @param dst: Port specification to forward to. |
| @param reverse: Do reverse forwarding from device to host (Boolean). |
| @param rebind: Allow rebinding an already bound port (Boolean). |
| """ |
| args = [] |
| if not rebind: |
| args.append('--no-rebind') |
| args += [src, dst] |
| self._forward(reverse, args) |
| |
| |
| def remove_forwarding(self, src=None, reverse=False): |
| """Removes forwarding on port. |
| |
| @param src: Port specification, or None to remove all forwarding. |
| @param reverse: Whether this is reverse forwarding (Boolean). |
| """ |
| args = [] |
| if src is None: |
| args.append('--remove-all') |
| else: |
| args += ['--remove', src] |
| self._forward(reverse, args) |
| |
| |
| def create_ssh_tunnel(self, port, local_port): |
| """ |
| Forwards a port securely through a tunnel process from the server |
| to the DUT for RPC server connection. |
| Add a 'ADB forward' rule to forward the RPC packets from the AdbHost |
| to the DUT. |
| |
| @param port: remote port on the DUT. |
| @param local_port: local forwarding port. |
| |
| @return: the tunnel process. |
| """ |
| self.add_forwarding('tcp:%s' % port, 'tcp:%s' % port) |
| return super(ADBHost, self).create_ssh_tunnel(port, local_port) |
| |
| |
| def disconnect_ssh_tunnel(self, tunnel_proc, port): |
| """ |
| Disconnects a previously forwarded port from the server to the DUT for |
| RPC server connection. |
| Remove the previously added 'ADB forward' rule to forward the RPC |
| packets from the AdbHost to the DUT. |
| |
| @param tunnel_proc: the original tunnel process returned from |
| |create_ssh_tunnel|. |
| @param port: remote port on the DUT. |
| |
| """ |
| self.remove_forwarding('tcp:%s' % port) |
| super(ADBHost, self).disconnect_ssh_tunnel(tunnel_proc, port) |
| |
| |
| def ensure_adb_mode(self, timeout=DEFAULT_WAIT_UP_TIME_SECONDS): |
| """Ensure the device is up and can be accessed by adb command. |
| |
| @param timeout: Time limit in seconds before returning even if the host |
| is not up. |
| |
| @raise: error.AutoservError if the device failed to reboot into |
| adb mode. |
| """ |
| if self.is_up(): |
| return |
| # Ignore timeout error to allow `fastboot reboot` to fail quietly and |
| # check if the device is in adb mode. |
| self.fastboot_run('reboot', timeout=timeout, ignore_timeout=True) |
| if not self.wait_up(timeout=timeout): |
| raise error.AutoservError( |
| 'Device %s failed to reboot into adb mode.' % |
| self.adb_serial) |
| self._reset_adbd_connection() |
| |
| |
| @retry.retry(error.GenericHostRunError, timeout_min=10) |
| def download_file(self, build_url, file, dest_dir, unzip=False, |
| unzip_dest=None): |
| """Download the given file from the build url. |
| |
| @param build_url: The url to use for downloading Android artifacts. |
| pattern: http://$devserver:###/static/branch/target/build_id |
| @param file: Name of the file to be downloaded, e.g., boot.img. |
| @param dest_dir: Destination folder for the file to be downloaded to. |
| @param unzip: If True, unzip the downloaded file. |
| @param unzip_dest: Location to unzip the downloaded file to. If not |
| provided, dest_dir is used. |
| """ |
| # Append the file name to the url if build_url is linked to the folder |
| # containing the file. |
| if not build_url.endswith('/%s' % file): |
| src_url = os.path.join(build_url, file) |
| else: |
| src_url = build_url |
| dest_file = os.path.join(dest_dir, file) |
| try: |
| self.teststation.run('wget -q -O "%s" "%s"' % (dest_file, src_url)) |
| if unzip: |
| unzip_dest = unzip_dest or dest_dir |
| self.teststation.run('unzip "%s/%s" -x -d "%s"' % |
| (dest_dir, file, unzip_dest)) |
| except: |
| # Delete the destination file if download failed. |
| self.teststation.run('rm -f "%s"' % dest_file) |
| raise |
| |
| |
| @property |
| def job_repo_url_attribute(self): |
| """Get the host attribute name for job_repo_url, which should append the |
| adb serial. |
| """ |
| return '%s_%s' % (constants.JOB_REPO_URL, self.adb_serial) |
| |
| |
| def list_files_glob(self, path_glob): |
| """Get a list of files on the device given glob pattern path. |
| |
| @param path_glob: The path glob that we want to return the list of |
| files that match the glob. Relative paths will not work as |
| expected. Supply an absolute path to get the list of files |
| you're hoping for. |
| |
| @returns List of files that match the path_glob. |
| """ |
| # This is just in case path_glob has no path separator. |
| base_path = os.path.dirname(path_glob) or '.' |
| result = self.run('find %s -path \'%s\' -print' % |
| (base_path, path_glob), ignore_status=True) |
| if result.exit_status != 0: |
| return [] |
| return result.stdout.splitlines() |
| |
| |
| @retry.retry(error.GenericHostRunError, |
| timeout_min=DISABLE_PACKAGE_VERIFICATION_TIMEOUT_MIN) |
| def disable_package_verification(self): |
| """Disables package verification on an android device. |
| |
| Disables the package verificatoin manager allowing any package to be |
| installed without checking |
| """ |
| logging.info('Disabling package verification on %s.', self.adb_serial) |
| self.check_boot_to_adb_complete() |
| self.run('am broadcast -a ' |
| 'com.google.gservices.intent.action.GSERVICES_OVERRIDE -e ' |
| 'global:package_verifier_enable 0') |
| |
| |
| @retry.retry(error.GenericHostRunError, timeout_min=APK_INSTALL_TIMEOUT_MIN) |
| def install_apk(self, apk, force_reinstall=True): |
| """Install the specified apk. |
| |
| This will install the apk and override it if it's already installed and |
| will also allow for downgraded apks. |
| |
| @param apk: The path to apk file. |
| @param force_reinstall: True to reinstall the apk even if it's already |
| installed. Default is set to True. |
| |
| @returns a CMDResult object. |
| """ |
| try: |
| client_utils.poll_for_condition( |
| lambda: self.run('pm list packages', |
| ignore_status=True).exit_status == 0, |
| timeout=120) |
| client_utils.poll_for_condition( |
| lambda: self.run('service list | grep mount', |
| ignore_status=True).exit_status == 0, |
| timeout=120) |
| return self.adb_run('install %s -d %s' % |
| ('-r' if force_reinstall else '', apk)) |
| except error.GenericHostRunError: |
| self.reboot() |
| raise |
| |
| |
| def uninstall_package(self, package): |
| """Remove the specified package. |
| |
| @param package: Android package name. |
| |
| @raises GenericHostRunError: uninstall failed |
| """ |
| result = self.adb_run('uninstall %s' % package) |
| |
| if self.is_apk_installed(package): |
| raise error.GenericHostRunError('Uninstall of "%s" failed.' |
| % package, result) |
| |
| @retry.retry(error.GenericHostRunError, timeout_min=0.2) |
| def _confirm_apk_installed(self, package_name): |
| """Confirm if apk is already installed with the given name. |
| |
| `pm list packages` command is not reliable some time. The retry helps to |
| reduce the chance of false negative. |
| |
| @param package_name: Name of the package, e.g., com.android.phone. |
| |
| @raise AutoservRunError: If the package is not found or pm list command |
| failed for any reason. |
| """ |
| name = 'package:%s' % package_name |
| self.adb_run('shell pm list packages | grep -w "%s"' % name) |
| |
| |
| def is_apk_installed(self, package_name): |
| """Check if apk is already installed with the given name. |
| |
| @param package_name: Name of the package, e.g., com.android.phone. |
| |
| @return: True if package is installed. False otherwise. |
| """ |
| try: |
| self._confirm_apk_installed(package_name) |
| return True |
| except: |
| return False |
| |
| def get_attributes_to_clear_before_provision(self): |
| """Get a list of attributes to be cleared before machine_install starts. |
| """ |
| return [self.job_repo_url_attribute] |
| |
| |
| def get_labels(self): |
| """Return a list of the labels gathered from the devices connected. |
| |
| @return: A list of strings that denote the labels from all the devices |
| connected. |
| """ |
| return self.labels.get_labels(self) |
| |
| |
| def _sync_time(self): |
| """Approximate synchronization of time between host and ADB device. |
| |
| This sets the ADB/Android device's clock to approximately the same |
| time as the Autotest host for the purposes of comparing Android system |
| logs such as logcat to logs from the Autotest host system. |
| """ |
| command = 'date ' |
| sdk_version = int(self.run('getprop %s' % SDK_FILE).stdout) |
| if sdk_version < 23: |
| # Android L and earlier use this format: date -s (format). |
| command += ('-s %s' % |
| datetime.datetime.now().strftime('%Y%m%d.%H%M%S')) |
| else: |
| # Android M and later use this format: date -u (format). |
| command += ('-u %s' % |
| datetime.datetime.utcnow().strftime('%m%d%H%M%Y.%S')) |
| self.run(command, timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| ignore_timeout=True) |
| |
| |
| def _enable_native_crash_logging(self): |
| """Enable native (non-Java) crash logging. |
| """ |
| if self.get_os_type() == OS_TYPE_ANDROID: |
| self._enable_android_native_crash_logging() |
| |
| |
| def _enable_brillo_native_crash_logging(self): |
| """Enables native crash logging for a Brillo DUT. |
| """ |
| try: |
| self.run('touch /data/misc/metrics/enabled', |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| ignore_timeout=True) |
| # If running, crash_sender will delete crash files every hour. |
| self.run('stop crash_sender', |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| ignore_timeout=True) |
| except error.GenericHostRunError as e: |
| logging.warn(e) |
| logging.warn('Failed to enable Brillo native crash logging.') |
| |
| |
| def _enable_android_native_crash_logging(self): |
| """Enables native crash logging for an Android DUT. |
| """ |
| # debuggerd should be enabled by default on Android. |
| result = self.run('pgrep debuggerd', |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS, |
| ignore_timeout=True, ignore_status=True) |
| if not result or result.exit_status != 0: |
| logging.debug('Unable to confirm that debuggerd is running.') |
| |
| |
| def _collect_crash_logs(self): |
| """Copies crash log files from the DUT to the drone. |
| """ |
| if self.get_os_type() == OS_TYPE_BRILLO: |
| self._collect_crash_logs_dut(BRILLO_NATIVE_CRASH_LOG_DIR) |
| elif self.get_os_type() == OS_TYPE_ANDROID: |
| self._collect_crash_logs_dut(ANDROID_TOMBSTONE_CRASH_LOG_DIR) |
| |
| |
| def _collect_crash_logs_dut(self, log_directory): |
| """Copies native crash logs from the Android/Brillo DUT to the drone. |
| |
| @param log_directory: absolute path of the directory on the DUT where |
| log files are stored. |
| """ |
| files = None |
| try: |
| result = self.run('find %s -maxdepth 1 -type f' % log_directory, |
| timeout=DEFAULT_COMMAND_RETRY_TIMEOUT_SECONDS) |
| files = result.stdout.strip().split() |
| except (error.GenericHostRunError, error.AutoservSSHTimeout, |
| error.CmdTimeoutError): |
| logging.debug('Unable to call find %s, unable to find crash logs', |
| log_directory) |
| if not files: |
| logging.debug('There are no crash logs on the DUT.') |
| return |
| |
| crash_dir = os.path.join(self.job.resultdir, 'crash') |
| try: |
| os.mkdir(crash_dir) |
| except OSError as e: |
| if e.errno != errno.EEXIST: |
| raise e |
| |
| for f in files: |
| logging.debug('DUT native crash file produced: %s', f) |
| dest = os.path.join(crash_dir, os.path.basename(f)) |
| # We've had cases where the crash file on the DUT has permissions |
| # "000". Let's override permissions to make them sane for the user |
| # collecting the crashes. |
| self.get_file(source=f, dest=dest, preserve_perm=False) |
