| # Copyright (c) 2013 The Chromium Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import logging |
| import urlparse |
| |
| import dynamic_ap_configurator |
| import ap_spec |
| from selenium.common.exceptions import NoSuchElementException as \ |
| SeleniumNoSuchElementException |
| from selenium.common.exceptions import WebDriverException |
| from selenium.common.exceptions import TimeoutException |
| |
| |
| class BelkinF9K1105APConfigurator( |
| dynamic_ap_configurator.DynamicAPConfigurator): |
| """Base class for Belkin F9K1105 router.""" |
| |
| |
| def _security_alert(self, alert): |
| text = alert.text |
| if "It is recommended to use WPA/WPA2 when WPS is enabled" in text: |
| alert.accept() |
| elif "Selecting WEP Encryption will disable the WPS" in text: |
| alert.accept() |
| elif 'Key0 is not complete' in text: |
| raise RuntimeError('Got %s error. You should click the generate ' |
| 'button to generate a key first' % alert.text) |
| else: |
| raise RuntimeError('Unknown alert dialog' + alert.text) |
| |
| |
| def get_supported_bands(self): |
| return [{'band': ap_spec.BAND_2GHZ, |
| 'channels': ['Auto', 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11]}, |
| {'band': ap_spec.BAND_5GHZ, |
| 'channels': ['Auto', 36, 40, 44, 48, 149, 153, 157, 161]}] |
| |
| |
| def get_supported_modes(self): |
| return [{'band': ap_spec.BAND_2GHZ, |
| 'modes': [ap_spec.MODE_G, ap_spec.MODE_N, |
| ap_spec.MODE_B | ap_spec.MODE_G | ap_spec.MODE_N]}, |
| {'band': ap_spec.BAND_5GHZ, |
| 'modes': [ap_spec.MODE_N, ap_spec.MODE_A, |
| ap_spec.MODE_A | ap_spec.MODE_N]}] |
| |
| |
| def get_number_of_pages(self): |
| return 2 |
| |
| |
| def is_security_mode_supported(self, security_mode): |
| """ |
| Returns if a given security_type is supported. |
| |
| @param security_mode: one security modes defined in the APSpec |
| |
| @return True if the security mode is supported; False otherwise. |
| |
| """ |
| return security_mode in (ap_spec.SECURITY_TYPE_DISABLED, |
| ap_spec.SECURITY_TYPE_WPAPSK, |
| ap_spec.SECURITY_TYPE_WPA2PSK, |
| ap_spec.SECURITY_TYPE_WEP) |
| |
| |
| def navigate_to_page(self, page_number): |
| """ |
| Navigates to the page corresponding to the given page number. |
| |
| This method performs the translation between a page number and a url to |
| load. This is used internally by apply_settings. |
| |
| @param page_number: page number of the page to load |
| |
| """ |
| if page_number == 1: |
| page_url = urlparse.urljoin(self.admin_interface_url, 'wifi_id.htm') |
| self._load_the_page(page_url, page_title="Network Name") |
| elif page_number == 2: |
| page_url = urlparse.urljoin(self.admin_interface_url, 'wifi_sc.htm') |
| self._load_the_page(page_url, page_title="Security") |
| else: |
| raise RuntimeError('Invalid page number passed. Number of pages ' |
| '%d, page value sent was %d' % |
| (self.get_number_of_pages(), page_number)) |
| |
| |
| def _load_the_page(self, page_url, page_title): |
| """ |
| Load the given page and check if the title matches and we see the |
| save_button object. |
| |
| @param page_url: The url of the page to load. |
| @param page_title: The title of the page we are loading. |
| |
| """ |
| self.set_wait_time(20) # The webpage takes a long time to load. |
| try: |
| self.get_url(page_url) |
| self.wait.until(lambda _:page_title in self.driver.title) |
| if 'dashboard' in self.driver.title: |
| # This is a workaround for an issue where the wait would return |
| # even though the page title is not what we expect. |
| self._login(page_url, page_title) |
| except TimeoutException, e: |
| dup = '//h1[contains(text(), "Duplicate Administrator")]' |
| if self.driver.find_element_by_id('p1210a005'): |
| self._login(page_url, page_title) |
| elif self.driver.find_element_by_xpath(dup).is_displayed(): |
| raise RuntimeError('We got the Duplicate admin message. ' |
| 'Some one has already logged into the ' |
| 'router. So we cannot login.') |
| finally: |
| self.set_wait_time(20) |
| self.wait.until(lambda _:page_title in self.driver.title) |
| self.restore_default_wait_time() |
| |
| |
| def _login(self, page_url, page_title): |
| """ |
| Login to the router. |
| |
| @param page_url: The url of the page to load. |
| @param page_title: The title of the page we are loading. |
| |
| """ |
| try: |
| self.wait_for_object_by_id('p1210Password') |
| except SeleniumNoSuchElementException, e: |
| if page_url in self.driver.current_url(): |
| logging.debug("In the login method, but we are already " |
| "logged in.") |
| else: |
| raise RuntimeError('We could not load the page ' + page_url + |
| str(e)) |
| self.set_content_of_text_field_by_id('password', 'p1210Password', |
| abort_check=True) |
| self.click_button_by_id('p1210a005') |
| pwd_wrong = '//small[@class="error" and @id="errpwderr"]' |
| if self.driver.find_element_by_xpath(pwd_wrong).is_displayed(): |
| try: |
| self.wait.until(lambda _:page_title in self.driver.title) |
| except TimeoutException, e: |
| raise RuntimeError('Incorrect password error: ' |
| 'The router is not accepting the password.') |
| |
| |
| def save_page(self, page_number): |
| """ |
| Saves the given page. |
| |
| @param page_number: Page number of the page to save. |
| |
| """ |
| if page_number == 1: |
| button_id = 'dnsapply' |
| elif page_number == 2: |
| button_id = 'btnapply' |
| if self.driver.find_element_by_id(button_id).is_displayed(): |
| self.click_button_by_id(button_id) |
| page_title = 'Welcome to your Belkin router dashboard!' |
| # The page reloads in about 80 secs and goes back to the dashboard. |
| # The device reboots to apply the changes, hence this delay. |
| try: |
| self.set_wait_time(120) |
| self.wait.until(lambda _: page_title in self.driver.title) |
| except: |
| self.driver.refresh() |
| # If page did not load even after a refresh just continue |
| # because we already clicked the save button. |
| if not page_title in self.driver.title: |
| pass |
| finally: |
| self.restore_default_wait_time() |
| else: |
| raise RuntimeError("We did not save the changes because we " |
| "could not find the button.") |
| |
| |
| def set_radio(self, enabled=True): |
| logging.debug('This router (%s) does not set the radio', |
| self.name) |
| return None |
| |
| |
| def set_ssid(self, ssid): |
| self.add_item_to_command_list(self._set_ssid, (ssid,), 1, 900) |
| |
| |
| def _set_ssid(self, ssid): |
| xpath = '//input[@name="wifi_ssid"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| xpath = '//input[@name="wifi_ssid1"]' |
| self.set_content_of_text_field_by_xpath(ssid, xpath, abort_check=False) |
| self._ssid = ssid |
| |
| |
| def set_channel(self, channel): |
| self.add_item_to_command_list(self._set_channel, (channel,), 1, 900) |
| |
| |
| def _set_channel(self, channel): |
| position = self._get_channel_popup_position(channel) |
| channel_choices = ['Auto', '1', '2', '3', '4', '5', '6', '7', '8', |
| '9', '10', '11'] |
| xpath = '//select[@name="wchan"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| xpath = '//select[@name="wchan1"]' |
| channel_choices = ['Auto', '36', '40', '44', '48', '149', '153', |
| '157', '161'] |
| self.select_item_from_popup_by_xpath(channel_choices[position], xpath) |
| |
| |
| def set_mode(self, mode, band=None): |
| self.add_item_to_command_list(self._set_mode, (mode, band,), 1, 900) |
| |
| |
| def _set_mode(self, mode, band=None): |
| mode_mapping = {ap_spec.MODE_G: '802.11 g', ap_spec.MODE_A: '802.11 a', |
| ap_spec.MODE_N: '802.11 n', |
| ap_spec.MODE_A | ap_spec.MODE_N: '802.11a & 802.11n', |
| ap_spec.MODE_B | ap_spec.MODE_G | ap_spec.MODE_N: |
| '802.11b & 802.11g & 802.11n'} |
| mode_name = mode_mapping.get(mode) |
| if not mode_name: |
| raise RuntimeError('The mode %d not supported by router %s. ', |
| hex(mode), self.name) |
| xpath = '//select[@name="wbr"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| xpath = '//select[@name="wbr1"]' |
| self.select_item_from_popup_by_xpath(mode_name, xpath) |
| |
| |
| def set_band(self, band): |
| if band == ap_spec.BAND_2GHZ: |
| self.current_band = ap_spec.BAND_2GHZ |
| elif band == ap_spec.BAND_5GHZ: |
| self.current_band = ap_spec.BAND_5GHZ |
| else: |
| raise RuntimeError('Invalid band sent %s' % band) |
| |
| |
| def _set_security(self, option, wait_for_xpath=None): |
| popup = '//select[@name="wl_authmod"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| popup = '//select[@name="wl_authmod1"]' |
| try: |
| self.select_item_from_popup_by_xpath(option, popup, |
| wait_for_xpath=wait_for_xpath, |
| alert_handler= |
| self._security_alert) |
| except WebDriverException, e: |
| message = str(e) |
| if 'Selecting WEP Encryption will disable the WPS' in message: |
| alert = self.driver.switch_to_alert() |
| alert.accept() |
| |
| |
| def set_security_disabled(self): |
| self.add_item_to_command_list(self._set_security_disabled, (), 2, 1000) |
| |
| |
| def _set_security_disabled(self): |
| self._set_security('Disabled') |
| |
| |
| def set_security_wep(self, key_value, authentication): |
| self.add_item_to_command_list(self._set_security_wep, |
| (key_value, authentication), 2, 1000) |
| |
| |
| def _set_security_wep(self, key_value, authentication): |
| text_field = '//input[@name="wl_phrase"]' |
| generate_button = '//a[@id="btngen" and \ |
| @onclick="return Gen64bitkey(0)"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| text_field = '//input[@name="wl1_phrase"]' |
| generate_button = '//a[@id="btngen" and \ |
| @onclick="return Gen64bitkey(1)"]' |
| self._set_security('64bit WEP', wait_for_xpath=text_field) |
| self.set_content_of_text_field_by_xpath(key_value, text_field, |
| abort_check=True) |
| self.click_button_by_xpath(generate_button) |
| |
| |
| def set_security_wpapsk(self, security, shared_key, update_interval=None): |
| self.add_item_to_command_list(self._set_security_wpapsk, |
| (security, shared_key, update_interval), |
| 2, 900) |
| |
| |
| def _set_security_wpapsk(self, security, shared_key, update_interval=None): |
| auth_popup = '//select[@name="wl_auth"]' |
| psk_field = '//input[@name="wl_wpa_ks_pwd"]' |
| if self.current_band == ap_spec.BAND_5GHZ: |
| auth_popup = '//select[@name="wl1_auth"]' |
| psk_field = '//input[@name="wl1_wpa_ks_pwd"]' |
| self._set_security('WPA/WPA2-Personal (PSK)', wait_for_xpath=auth_popup) |
| selection = 'WPA2-PSK' |
| if security == ap_spec.SECURITY_TYPE_WPAPSK: |
| selection = 'WPA-PSK' |
| self.select_item_from_popup_by_xpath(selection, auth_popup, |
| wait_for_xpath=psk_field, |
| alert_handler=self._security_alert) |
| self.set_content_of_text_field_by_xpath(shared_key, psk_field, |
| abort_check=False) |
| |
| |
| def is_visibility_supported(self): |
| """ |
| Returns if AP supports setting the visibility (SSID broadcast). |
| |
| @return True if supported; False otherwise. |
| """ |
| return False |
| |
| |
| def is_update_interval_supported(self): |
| """ |
| Returns True if setting the PSK refresh interval is supported. |
| |
| @return True is supported; False otherwise |
| """ |
| return False |
