| # Copyright (c) 2013 The Chromium Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import collections |
| import logging |
| import re |
| import time |
| |
| from autotest_lib.client.common_lib import error |
| from autotest_lib.client.common_lib import utils |
| from autotest_lib.client.common_lib.cros.network import iw_event_logger |
| |
| |
| HT20 = 'HT20' |
| HT40_ABOVE = 'HT40+' |
| HT40_BELOW = 'HT40-' |
| |
| SECURITY_OPEN = 'open' |
| SECURITY_WEP = 'wep' |
| SECURITY_WPA = 'wpa' |
| SECURITY_WPA2 = 'wpa2' |
| # MIxed mode security is WPA2/WPA |
| SECURITY_MIXED = 'mixed' |
| |
| # Table of lookups between the output of item 'secondary channel offset:' from |
| # iw <device> scan to constants. |
| |
| HT_TABLE = {'no secondary': HT20, |
| 'above': HT40_ABOVE, |
| 'below': HT40_BELOW} |
| |
| IwBand = collections.namedtuple('Band', ['num', 'frequencies', 'mcs_indices']) |
| IwBss = collections.namedtuple('IwBss', ['bss', 'frequency', 'ssid', 'security', |
| 'ht']) |
| IwNetDev = collections.namedtuple('IwNetDev', ['phy', 'if_name', 'if_type']) |
| IwTimedScan = collections.namedtuple('IwTimedScan', ['time', 'bss_list']) |
| |
| # The fields for IwPhy are as follows: |
| # name: string name of the phy, such as "phy0" |
| # bands: list of IwBand objects. |
| # modes: List of strings containing interface modes supported, such as "AP". |
| # command: List of strings containing nl80211 commands supported, such as |
| # "authenticate". |
| # max_scan_ssids: Maximum number of SSIDs which can be scanned at once. |
| IwPhy = collections.namedtuple( |
| 'Phy', ['name', 'bands', 'modes', 'commands', 'max_scan_ssids', |
| 'avail_tx_antennas', 'avail_rx_antennas']) |
| |
| DEFAULT_COMMAND_IW = 'iw' |
| |
| # Time command to get elapsed time. Full path is used to avoid using the |
| # built-in 'time' command from the bash shell |
| IW_TIME_COMMAND = '/usr/local/bin/time -f "%e"' |
| |
| IW_LINK_KEY_BEACON_INTERVAL = 'beacon int' |
| IW_LINK_KEY_DTIM_PERIOD = 'dtim period' |
| IW_LINK_KEY_FREQUENCY = 'freq' |
| IW_LOCAL_EVENT_LOG_FILE = './debug/iw_event_%d.log' |
| |
| |
| class IwRunner(object): |
| """Defines an interface to the 'iw' command.""" |
| |
| |
| def __init__(self, remote_host=None, command_iw=DEFAULT_COMMAND_IW): |
| self._run = utils.run |
| self._host = remote_host |
| if remote_host: |
| self._run = remote_host.run |
| self._command_iw = command_iw |
| self._log_id = 0 |
| |
| |
| def _parse_scan_results(self, output): |
| """Parse the output of the 'scan' and 'scan dump' commands. |
| |
| @param output: string command output. |
| |
| @returns a list of IwBss namedtuples; None if the scan fails |
| |
| """ |
| bss = None |
| frequency = None |
| ssid = None |
| ht = None |
| security = None |
| supported_securities = [] |
| bss_list = [] |
| for line in output.splitlines(): |
| line = line.strip() |
| bss_match = re.match('BSS ([0-9a-f:]+)', line) |
| if bss_match: |
| if bss != None: |
| security = self.determine_security(supported_securities) |
| iwbss = IwBss(bss, frequency, ssid, security, ht) |
| bss_list.append(iwbss) |
| bss = frequency = ssid = security = ht = None |
| supported_securities = [] |
| bss = bss_match.group(1) |
| if line.startswith('freq:'): |
| frequency = int(line.split()[1]) |
| if line.startswith('SSID:'): |
| ssid = line.split() |
| if len(ssid) > 1: |
| ssid = ssid[1] |
| else: |
| ssid = None |
| if line.startswith('* secondary channel offset'): |
| ht = HT_TABLE[line.split(':')[1].strip()] |
| if line.startswith('WPA'): |
| supported_securities.append(SECURITY_WPA) |
| if line.startswith('RSN'): |
| supported_securities.append(SECURITY_WPA2) |
| security = self.determine_security(supported_securities) |
| bss_list.append(IwBss(bss, frequency, ssid, security, ht)) |
| return bss_list |
| |
| |
| def add_interface(self, phy, interface, interface_type): |
| """ |
| Add an interface to a WiFi PHY. |
| |
| @param phy: string name of PHY to add an interface to. |
| @param interface: string name of interface to add. |
| @param interface_type: string type of interface to add (e.g. 'monitor'). |
| |
| """ |
| self._run('%s phy %s interface add %s type %s' % |
| (self._command_iw, phy, interface, interface_type)) |
| |
| |
| def disconnect_station(self, interface): |
| """ |
| Disconnect a STA from a network. |
| |
| @param interface: string name of interface to disconnect. |
| |
| """ |
| self._run('%s dev %s disconnect' % (self._command_iw, interface)) |
| |
| |
| def get_interface(self, interface_name): |
| """Get full information about an interface given an interface name. |
| |
| @param interface_name: string name of interface (e.g. 'wlan0'). |
| @return IwNetDev tuple. |
| |
| """ |
| matching_interfaces = [iw_if for iw_if in self.list_interfaces() |
| if iw_if.if_name == interface_name] |
| if len(matching_interfaces) != 1: |
| raise error.TestFail('Could not find interface named %s' % |
| interface_name) |
| |
| return matching_interfaces[0] |
| |
| |
| def get_link_value(self, interface, iw_link_key, ignore_failures=False): |
| """Get the value of a link property for |interface|. |
| |
| This command parses fields of iw link: |
| |
| #> iw dev wlan0 link |
| Connected to 74:e5:43:10:4f:c0 (on wlan0) |
| SSID: PMKSACaching_4m9p5_ch1 |
| freq: 5220 |
| RX: 5370 bytes (37 packets) |
| TX: 3604 bytes (15 packets) |
| signal: -59 dBm |
| tx bitrate: 13.0 MBit/s MCS 1 |
| |
| bss flags: short-slot-time |
| dtim period: 5 |
| beacon int: 100 |
| |
| @param iw_link_key: string one of IW_LINK_KEY_* defined above. |
| @param interface: string desired value of iw link property. |
| |
| """ |
| result = self._run('%s dev %s link' % (self._command_iw, interface), |
| ignore_status=ignore_failures) |
| if result.exit_status: |
| # When roaming, there is a period of time for mac80211 based drivers |
| # when the driver is 'associated' with an SSID but not a particular |
| # BSS. This causes iw to return an error code (-2) when attempting |
| # to retrieve information specific to the BSS. This does not happen |
| # in mwifiex drivers. |
| return None |
| |
| find_re = re.compile('\s*%s:\s*(.*\S)\s*$' % iw_link_key) |
| find_results = filter(bool, |
| map(find_re.match, result.stdout.splitlines())) |
| if not find_results: |
| if ignore_failures: |
| return None |
| |
| raise error.TestFail('Could not find iw link property %s.' % |
| iw_link_key) |
| |
| actual_value = find_results[0].group(1) |
| logging.info('Found iw link key %s with value %s.', |
| iw_link_key, actual_value) |
| return actual_value |
| |
| |
| def ibss_join(self, interface, ssid, frequency): |
| """ |
| Join a WiFi interface to an IBSS. |
| |
| @param interface: string name of interface to join to the IBSS. |
| @param ssid: string SSID of IBSS to join. |
| @param frequency: int frequency of IBSS in Mhz. |
| |
| """ |
| self._run('%s dev %s ibss join %s %d' % |
| (self._command_iw, interface, ssid, frequency)) |
| |
| |
| def ibss_leave(self, interface): |
| """ |
| Leave an IBSS. |
| |
| @param interface: string name of interface to remove from the IBSS. |
| |
| """ |
| self._run('%s dev %s ibss leave' % (self._command_iw, interface)) |
| |
| |
| def list_interfaces(self, desired_if_type=None): |
| """List WiFi related interfaces on this system. |
| |
| @param desired_if_type: string type of interface to filter |
| our returned list of interfaces for (e.g. 'managed'). |
| |
| @return list of IwNetDev tuples. |
| |
| """ |
| output = self._run('%s dev' % self._command_iw).stdout |
| interfaces = [] |
| phy = None |
| if_name = None |
| if_type = None |
| for line in output.splitlines(): |
| m = re.match('phy#([0-9]+)', line) |
| if m: |
| phy = 'phy%d' % int(m.group(1)) |
| m = re.match('[\s]*Interface (.*)', line) |
| if m: |
| if_name = m.group(1) |
| # Common values for type are 'managed', 'monitor', and 'IBSS'. |
| m = re.match('[\s]*type ([a-zA-Z]+)', line) |
| if m: |
| if_type = m.group(1) |
| if phy and if_name and if_type: |
| interfaces.append(IwNetDev(phy=phy, if_name=if_name, |
| if_type=if_type)) |
| # One phy may have many interfaces, so don't reset it. |
| if_name = if_type = None |
| |
| if desired_if_type: |
| interfaces = [interface for interface in interfaces |
| if interface.if_type == desired_if_type] |
| return interfaces |
| |
| |
| def list_phys(self): |
| """ |
| List WiFi PHYs on the given host. |
| |
| @return list of IwPhy tuples. |
| |
| """ |
| output = self._run('%s list' % self._command_iw).stdout |
| |
| pending_phy_name = None |
| current_band = None |
| current_section = None |
| all_phys = [] |
| |
| def add_pending_phy(): |
| """Add the pending phy into |all_phys|.""" |
| bands = tuple(IwBand(band.num, |
| tuple(band.frequencies), |
| tuple(band.mcs_indices)) |
| for band in pending_phy_bands) |
| new_phy = IwPhy(pending_phy_name, |
| bands, |
| tuple(pending_phy_modes), |
| tuple(pending_phy_commands), |
| pending_phy_max_scan_ssids, |
| pending_phy_tx_antennas, |
| pending_phy_rx_antennas) |
| all_phys.append(new_phy) |
| |
| for line in output.splitlines(): |
| match_phy = re.search('Wiphy (.*)', line) |
| if match_phy: |
| if pending_phy_name: |
| add_pending_phy() |
| pending_phy_name = match_phy.group(1) |
| pending_phy_bands = [] |
| pending_phy_modes = [] |
| pending_phy_commands = [] |
| pending_phy_max_scan_ssids = None |
| pending_phy_tx_antennas = 0 |
| pending_phy_rx_antennas = 0 |
| continue |
| |
| match_section = re.match('\s*(\w.*):\s*$', line) |
| if match_section: |
| current_section = match_section.group(1) |
| match_band = re.match('Band (\d+)', current_section) |
| if match_band: |
| current_band = IwBand(num=int(match_band.group(1)), |
| frequencies=[], |
| mcs_indices=[]) |
| pending_phy_bands.append(current_band) |
| continue |
| |
| # Check for max_scan_ssids. This isn't a section, but it |
| # also isn't within a section. |
| match_max_scan_ssids = re.match('\s*max # scan SSIDs: (\d+)', |
| line) |
| if match_max_scan_ssids and pending_phy_name: |
| pending_phy_max_scan_ssids = int( |
| match_max_scan_ssids.group(1)) |
| continue |
| |
| if (current_section == 'Supported interface modes' and |
| pending_phy_name): |
| mode_match = re.search('\* (\w+)', line) |
| if mode_match: |
| pending_phy_modes.append(mode_match.group(1)) |
| continue |
| |
| if current_section == 'Supported commands' and pending_phy_name: |
| command_match = re.search('\* (\w+)', line) |
| if command_match: |
| pending_phy_commands.append(command_match.group(1)) |
| continue |
| |
| match_avail_antennas = re.match('\s*Available Antennas: TX (\S+)' |
| ' RX (\S+)', line) |
| if match_avail_antennas and pending_phy_name: |
| pending_phy_tx_antennas = int( |
| match_avail_antennas.group(1), 16) |
| pending_phy_rx_antennas = int( |
| match_avail_antennas.group(2), 16) |
| continue |
| |
| if not all([current_band, pending_phy_name, |
| line.startswith('\t')]): |
| continue |
| |
| mhz_match = re.search('(\d+) MHz', line) |
| if mhz_match: |
| current_band.frequencies.append(int(mhz_match.group(1))) |
| continue |
| |
| # re_mcs needs to match something like: |
| # HT TX/RX MCS rate indexes supported: 0-15, 32 |
| if re.search('HT TX/RX MCS rate indexes supported: ', line): |
| rate_string = line.split(':')[1].strip() |
| for piece in rate_string.split(','): |
| if piece.find('-') > 0: |
| # Must be a range like ' 0-15' |
| begin, end = piece.split('-') |
| for index in range(int(begin), int(end) + 1): |
| current_band.mcs_indices.append(index) |
| else: |
| # Must be a single rate like '32 ' |
| current_band.mcs_indices.append(int(piece)) |
| if pending_phy_name: |
| add_pending_phy() |
| return all_phys |
| |
| |
| def remove_interface(self, interface, ignore_status=False): |
| """ |
| Remove a WiFi interface from a PHY. |
| |
| @param interface: string name of interface (e.g. mon0) |
| @param ignore_status: boolean True iff we should ignore failures |
| to remove the interface. |
| |
| """ |
| self._run('%s dev %s del' % (self._command_iw, interface), |
| ignore_status=ignore_status) |
| |
| |
| def determine_security(self, supported_securities): |
| """Determines security from the given list of supported securities. |
| |
| @param supported_securities: list of supported securities from scan |
| |
| """ |
| if not supported_securities: |
| security = SECURITY_OPEN |
| elif len(supported_securities) == 1: |
| security = supported_securities[0] |
| else: |
| security = SECURITY_MIXED |
| return security |
| |
| |
| def scan(self, interface, frequencies=(), ssids=()): |
| """Performs a scan. |
| |
| @param interface: the interface to run the iw command against |
| @param frequencies: list of int frequencies in Mhz to scan. |
| @param ssids: list of string SSIDs to send probe requests for. |
| |
| @returns a list of IwBss namedtuples; None if the scan fails |
| |
| """ |
| scan_result = self.timed_scan(interface, frequencies, ssids) |
| if scan_result is None: |
| return None |
| return scan_result.bss_list |
| |
| |
| def timed_scan(self, interface, frequencies=(), ssids=()): |
| """Performs a timed scan. |
| |
| @param interface: the interface to run the iw command against |
| @param frequencies: list of int frequencies in Mhz to scan. |
| @param ssids: list of string SSIDs to send probe requests for. |
| |
| @returns a IwTimedScan namedtuple; None if the scan fails |
| |
| """ |
| freq_param = '' |
| if frequencies: |
| freq_param = ' freq %s' % ' '.join(map(str, frequencies)) |
| ssid_param = '' |
| if ssids: |
| ssid_param = ' ssid "%s"' % '" "'.join(ssids) |
| |
| command = '%s %s dev %s scan%s%s' % (IW_TIME_COMMAND, |
| self._command_iw, interface, freq_param, ssid_param) |
| scan = self._run(command, ignore_status=True) |
| if scan.exit_status != 0: |
| # The device was busy |
| logging.debug('scan exit_status: %d', scan.exit_status) |
| return None |
| if not scan.stdout: |
| logging.debug('Empty scan result') |
| bss_list = [] |
| else: |
| bss_list = self._parse_scan_results(scan.stdout) |
| scan_time = float(scan.stderr) |
| return IwTimedScan(scan_time, bss_list) |
| |
| |
| def scan_dump(self, interface): |
| """Dump the contents of the scan cache. |
| |
| Note that this does not trigger a scan. Instead, it returns |
| the kernel's idea of what BSS's are currently visible. |
| |
| @param interface: the interface to run the iw command against |
| |
| @returns a list of IwBss namedtuples; None if the scan fails |
| |
| """ |
| result = self._run('%s dev %s scan dump' % (self._command_iw, |
| interface)) |
| return self._parse_scan_results(result.stdout) |
| |
| |
| def set_tx_power(self, interface, power): |
| """ |
| Set the transmission power for an interface. |
| |
| @param interface: string name of interface to set Tx power on. |
| @param power: string power parameter. (e.g. 'auto'). |
| |
| """ |
| self._run('%s dev %s set txpower %s' % |
| (self._command_iw, interface, power)) |
| |
| |
| def set_freq(self, interface, freq): |
| """ |
| Set the frequency for an interface. |
| |
| @param interface: string name of interface to set frequency on. |
| @param freq: int frequency |
| |
| """ |
| self._run('%s dev %s set freq %d' % |
| (self._command_iw, interface, freq)) |
| |
| |
| def set_regulatory_domain(self, domain_string): |
| """ |
| Set the regulatory domain of the current machine. Note that |
| the regulatory change happens asynchronously to the exit of |
| this function. |
| |
| @param domain_string: string regulatory domain name (e.g. 'US'). |
| |
| """ |
| self._run('%s reg set %s' % (self._command_iw, domain_string)) |
| |
| |
| def get_regulatory_domain(self): |
| """ |
| Get the regulatory domain of the current machine. |
| |
| @returns a string containing the 2-letter regulatory domain name |
| (e.g. 'US'). |
| |
| """ |
| output = self._run('%s reg get' % self._command_iw).stdout |
| m = re.match('^country (..):', output) |
| if not m: |
| return None |
| return m.group(1) |
| |
| |
| def wait_for_scan_result(self, interface, bss=None, ssid=None, |
| timeout_seconds=30): |
| """Returns a IWBSS object for a network with the given bssed or ssid. |
| |
| @param interface: which interface to run iw against |
| @param bss: BSS as a string |
| @param ssid: ssid as a string |
| @param timeout_seconds: the amount of time to wait in seconds |
| |
| @returns a list of IwBss collections that contain the given bss or ssid |
| |
| """ |
| start_time = time.time() |
| scan_failure_attempts = 0 |
| logging.info('Performing a scan with a max timeout of %d seconds.', |
| timeout_seconds) |
| while time.time() - start_time < timeout_seconds: |
| scan_results = self.scan(interface) |
| if scan_results is None: |
| scan_failure_attempts += 1 |
| # Allow in-progress scan to complete |
| time.sleep(5) |
| # If the in-progress scan takes more than 30 seconds to |
| # complete it will most likely never complete; abort. |
| # See crbug.com/309148. |
| if scan_failure_attempts > 5: |
| logging.error('Scan failed to run, see debug log for ' |
| 'error code.') |
| return None |
| continue |
| scan_failure_attempts = 0 |
| matching_bsses = [] |
| for iwbss in scan_results: |
| if bss is not None and iwbss.bss != bss: |
| continue |
| if ssid is not None and iwbss.ssid != ssid: |
| continue |
| matching_bsses.append(iwbss) |
| if len(matching_bsses) > 0: |
| return matching_bsses |
| |
| |
| def wait_for_link(self, interface, timeout_seconds=10): |
| """Waits until a link completes on |interface|. |
| |
| @param interface: which interface to run iw against. |
| @param timeout_seconds: the amount of time to wait in seconds. |
| |
| @returns True if link was established before the timeout. |
| |
| """ |
| start_time = time.time() |
| while time.time() - start_time < timeout_seconds: |
| link_results = self._run('%s dev %s link' % |
| (self._command_iw, interface)) |
| if 'Not connected' not in link_results.stdout: |
| return True |
| time.sleep(1) |
| return False |
| |
| |
| def set_antenna_bitmap(self, phy, tx_bitmap, rx_bitmap): |
| """Set antenna chain mask on given phy (radio). |
| |
| This function will set the antennas allowed to use for TX and |
| RX on the |phy| based on the |tx_bitmap| and |rx_bitmap|. |
| This command is only allowed when the interfaces on the phy are down. |
| |
| @param phy: phy name |
| @param tx_bitmap: bitmap of allowed antennas to use for TX |
| @param rx_bitmap: bitmap of allowed antennas to use for RX |
| |
| """ |
| command = '%s phy %s set antenna %d %d' % (self._command_iw, phy, |
| tx_bitmap, rx_bitmap) |
| self._run(command) |
| |
| |
| def get_event_logger(self): |
| """Create and return a IwEventLogger object. |
| |
| @returns a IwEventLogger object. |
| |
| """ |
| local_file = IW_LOCAL_EVENT_LOG_FILE % (self._log_id) |
| self._log_id += 1 |
| return iw_event_logger.IwEventLogger(self._host, self._command_iw, |
| local_file) |
