#!/bin/sh

# Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# Provides alert messages in boot stage, called by chromeos_startup.

# Two instances of this script should never be run in parallel: the alert
# animations will fight with each other, and there is a potential race in the
# emission of the boot-alert-request signal (see http://crosbug.com/33838).

# Since this script only provides messages, never abort.
set +e

# Prints usage help for commands supports
usage_help() {
  echo <<EOF
Usage: $0 <message_id> [arg ...]
<message_id> is one of the messages ids (file name without the .txt suffix) in
/usr/share/chromeos-assets/text/boot_messages/\$locale "
EOF
}

# Prints out system locale by searching cached settings or VPD.
find_current_locale() {
  # TODO(hungte) Find some better way other than hard coding file path here.
  local state_file='/mnt/stateful_partition/encrypted/chronos/Local State'
  local locale=""
  if [ -f "${state_file}" ]; then
    locale="$(jq --raw-output -e ".intl.app_locale" "${state_file}")"
  fi
  if [ -z "${locale}" ] || [ "${locale}" = "null" ]; then
    locale="$(cros_region_data -s locales)"
  fi
  echo "${locale}"
}

# Determine the right console. On Freon systems, the default VT (/run/frecon/vt0) may
# not exist until we've invoked Frecon (via display_boot_message) and would
# cause problems when we try to write then read (for example, warn_dev).  To
# prevent that, fall back to /dev/null if not available.
setup_tty() {
  [ -x /sbin/frecon ] && TTY=/run/frecon/vt0 || TTY=/dev/tty1
  [ -e "${TTY}" ] || TTY=/dev/null
}

# Shows boot messages in assets folder on screen center if available.
# Arguments: message in /usr/share/chromeos-assets/text/boot_messages/$locale
show_assets_message() {
  local message="$1"
  local locale locale_list

  # Build locale list
  locale="$(find_current_locale)" || locale=""
  # Starting from R34, the initial_locale from VPD may have multiple values,
  # separated by ',' -- and we only want to try the primary one.
  locale="${locale%%,*}"
  locale_list="$locale"
  while [ "${locale%[-_]*}" != "$locale" ]; do
    locale="${locale%[-_]*}"
    locale_list="$locale_list $locale"
  done
  locale_list="$locale_list en-US en"

  if display_boot_message "${message}" "${locale_list}"; then
    # Frecon may create the text terminal so we want to setup TTY again.
    setup_tty
  else
    # Display the message code itself as fallback.
    echo "${message}" >>"${TTY}"
  fi
}

# Prints the two byte hex code of the matched char or
# exists non-zero on timeout.  It reads from the tty in arguments.
# Arguments: tty time_in_seconds two_byte_hex_match_1 two_byte_hex_match_2 ...
match_char_timeout() {
  local tty="$1"
  local delay_secs="$2"
  shift
  shift

  local input=''
  local match=''
  local start_time=$(date +%s)
  local stop_time=$((start_time + delay_secs))
  local tty_config=$(stty -g -F "${tty}")
  stty raw -echo cread -F "${tty}"
  while [ $delay_secs -gt 0 ]; do
    input=$(timeout -s KILL ${delay_secs}s head -c 1 "${tty}")
    [ $? -eq 137 ] && break  # Timed out.
    input=$(printf "%02x" "'$input")
    for char in "$@"; do
      if [ "$input" = "$char" ]; then
        match="$input"
        break
      fi
    done
    [ -n "$match" ] && break
    delay_secs=$((stop_time - $(date +%s) ))
  done
  # Restores the tty's settings.
  stty $tty_config -F "${tty}"

  [ -z "$match" ] && return 1
  printf "$match"
  return 0
}

# Prints message when entering developer mode
# Argument: time to countdown (in seconds)
mode_enter_dev() {
  local delay_secs="${1:-30}"

  show_assets_message "enter_dev1_virtual"

  local format='\r  %-30s'
  for dev_count_down in $(seq $delay_secs -1 1); do
    # Trailing spaces must exist to clear previous message when the printed
    # counter width changed (ex, 100->99).
    # TODO(hungte) merge this with assets messages so it can be localized.
    printf "$format" "Starting in $dev_count_down second(s)..." >>"${TTY}"
    sleep 1
  done

  # Count-down
  tput clear >>"${TTY}"
  show_assets_message "enter_dev2"
}

# Prints message when leaving developer mode
mode_leave_dev() {
  show_assets_message "leave_dev"
}

# Prints messages before starting firmware update
mode_update_firmware() {
  show_assets_message "update_firmware"
}

# Prints messages before starting user-initiated wipe.
mode_power_wash() {
  show_assets_message "power_wash"
}

# Prints message before starting to rebuild a corrupted stateful partition.
mode_self_repair() {
  show_assets_message "self_repair"
}

# Prints a message telling the user that developer mode has been disabled for
# the device upon request by the device owner.  After a timeout, or after the
# user confirms by pressing space, the system then switches back to verified
# boot mode automatically, and reboots.
mode_block_devmode() {
  local delay_secs=30

  show_assets_message "block_devmode_virtual"

  # Read a space bar or timeout.
  local input=$(match_char_timeout "${TTY}" "${delay_secs}" 20)
  tput clear >>"${TTY}"

  # Return to verified mode.
  crossystem disable_dev_request=1
  reboot

  # In case reboot fails, prevent the system from continuing to boot.
  sleep infinity
}

# Updates the progress bar to reflect the provided percentage.
mode_update_progress() {
  local progress="$1"
  if ! display_boot_message update_progress "${progress}"; then
    # Display the progress on the terminal as a fallback.
    printf "${progress}%%\r" >>"${TTY}"
  fi
}

# Show a message indicating that we're doing a TPM firmware update.
mode_update_tpm_firmware() {
  show_assets_message "update_tpm_firmware"
}

# Show a message indicating that we're doing a detachable base firmware update.
mode_update_detachable_base_firmware() {
  show_assets_message "update_detachable_base_firmware"
}

# Show a message indicating that we're doing a touchpad firmware update.
mode_update_touchpad_firmware() {
  show_assets_message "update_touchpad_firmware"
}

# Show a message indicating that we're doing a touchscreen firmware update.
mode_update_touchscreen_firmware() {
  show_assets_message "update_touchscreen_firmware"
}

# Show a message explaining to the user that the battery isn't sufficiently
# charged to a apply a firmware update and ask for the charger to be plugged.
mode_update_tpm_firmware_low_battery() {
  show_assets_message "update_tpm_firmware_low_battery"
}

# Show a message explaining to the user that the battery isn't sufficiently
# charged to a apply a firmware update and tell them that they need to wait
# while the battery is charging.
mode_update_tpm_firmware_low_battery_charging() {
  show_assets_message "update_tpm_firmware_low_battery_charging"
}

# Show a message telling the user that the TPM firmware update failed and that
# they need to go through recovery to retry the update.
mode_update_tpm_firmware_failure() {
  show_assets_message "update_tpm_firmware_failure"

  # Read a space bar. Timeout after 10 years (i.e. practically no timeout).
  local input=$(match_char_timeout "${TTY}" 315360000 20)
  tput clear >>"${TTY}"
}

# Main initialization and dispatcher
main() {
  # process args
  if [ $# -lt 1 ]; then
    usage_help
    exit 1
  fi
  local mode="$(echo "$1" | tr -dc "[:alnum:]_")"
  shift

  # For headless devices, we want to provide some messages so people can know
  # what goes wrong.
  local output
  for output in /dev/kmsg /dev/console; do
    (echo "chromeos-boot-alert: ${mode}" >>"${output}") 2>/dev/null || true
  done

  setup_tty

  if [ -x /usr/sbin/board_boot_alert ]; then
    # Allow overriding boot-alert behavior (usually for headless devices).
    /usr/sbin/board_boot_alert "${mode}" "$@" && exit
  fi

  # Wait until the boot-alert-ready abstract job has started, indicating that
  # it's safe to display an alert onscreen.
  if ! initctl status boot-alert-ready | grep -q running; then
    initctl emit boot-alert-request
  fi

  # Light up the screen if possible.
  backlight_tool --set_brightness_percent=100 || true

  # Hides cursor and prevents console from blanking after long inactivity.
  setterm -cursor off -blank 0 -powersave off -powerdown 0 >>"${TTY}" || true

  local handler="mode_${mode}"
  if type "${handler}" 2>/dev/null | head -1 | grep -q "function"; then
    "${handler}" "$@"
  else
    usage_help
    exit 1
  fi
}

# Main Entry
main "$@"