#!/bin/sh
# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# Shutdown is best-effort. We don't want to die on errors.
set +e

bootstat shutdown-start

. /sbin/killers

# Remount root in case a developer has remounted it rw for some reason.
mount -n -o remount,ro /

# TODO: swapoff as necessary.

# Kill any that may prevent us from unmounting the stateful partition
# or the crypto-home and then unmount. These should be all that we need
# to unmount for a clean shutdown.
kill_with_open_files_on "shutdown" /mnt/stateful_partition /home/chronos /var

# CROS_DEBUG equals one if we've booted in developer mode or we've booted a
# developer image.
crossystem "cros_debug?1"
CROS_DEBUG="$((! $?))"

dev_unmount_packages() { true; }

collect_shutdown_umount_failure_logs() {
  (
    # Get mount table as seen by this process. This list may not be
    # comprehensive: private mounts inside mount namespaces may not
    # appear in this list.
    echo "Active mounts:"
    cat "/proc/self/mountinfo"
    # Log information about the dm-crypt device.
    echo "Device-mapper target state:"
    dmsetup info
    # Log upstart jobs that are still running: jobs here can stop the
    # stateful partition from getting unmounted.
    echo "Active Upstart jobs:"
    initctl list | grep running
    # Log dbus services still connected to the bus, with a 1 second timeout.
    echo "Active D-Bus services:"
    dbus-send --system --dest=org.freedesktop.DBus --type=method_call \
      --print-reply --reply-timeout=1000 /org/freedesktop/DBus \
      org.freedesktop.DBus.ListNames

    # Parse pids of processes with active mount namespaces. PID is the fourth
    # field and the first line refers to the root mount namespace.
    for pid in $(lsns --raw -n -t mnt | cut -f4 -d' ' | tail -n+2); do
      echo "====== Comm: $(cat /proc/${pid}/comm) ======"
      # The mount namespaces are created by minijail, which shows up as
      # 'minijail-init': get child processes for better insight into which
      # process is running here.
      echo "Child processes:"
      ps --ppid ${pid}
      # Use findmnt to look inside the mount namespace for any mounts that
      # refer to the (enc)stateful partition. These mounts may keep the
      # stateful partition from unmounting cleanly.
      echo "Open mounts into (enc)stateful:"
      findmnt --raw -N ${pid} | grep -e stateful -e mmcblk0p1 -e nvme0n1p1 \
        -e sda1
    done

    # Get a list of processes with files open. lsof is verbose: keep it at the
    # end of the log.
    echo "Processes with files open:"
    lsof -n
  ) >/run/shutdown_umount_failure.log 2>&1
}

if [ "${CROS_DEBUG}" -eq 1 ]; then
  . /usr/share/cros/dev_utils.sh
fi

STATEFUL_UPDATE="/mnt/stateful_partition/.update_available"

# target_version should only be created for test lab DUTs.
TARGET_VERSION="/run/update_target_version"
UPDATE_TARGET=""
STATE_DEV=""

if [ "${CROS_DEBUG}" = "1" ] && [ -f "${STATEFUL_UPDATE}" ]; then
  STATEFUL_UPDATE_ARGS="$(cat "${STATEFUL_UPDATE}")"

  if [ -r "${TARGET_VERSION}" ] && [ ! -L "${TARGET_VERSION}" ]; then
    # Used later to clear Quota parameters from stateful.
    UPDATE_TARGET="$(cut -d '.' -f 1 "${TARGET_VERSION}")"
    STATE_DEV="$(findmnt -n -o SOURCE -M /mnt/stateful_partition)"
    rm -f "${TARGET_VERSION}"
  fi

  if [ "${STATEFUL_UPDATE_ARGS}" = "clobber" ]; then
    PRESERVE_DIR="/mnt/stateful_partition/unencrypted/preserve"

    # Measure shutdown time up to this point.
    bootstat before_preserve

    # We preserve a few files. Make sure preservation directory starts empty.
    rm -rf "${PRESERVE_DIR}/log"
    mkdir -p -m 0755 "${PRESERVE_DIR}"
    cp -a "${MNTS}/var/log" "${PRESERVE_DIR}"

    # We are about to put this into a directory that will shortly be wiped
    # out. Keep a timestamp where it will be preserved as well.
    PRESERVE_METRICS="${PRESERVE_DIR}/log/metrics"
    bootstat_archive "${PRESERVE_METRICS}/shutdown.$(date '+%Y%m%d%H%M%S')"
  fi
fi

# Signal that the clean shutdown point was reached (or at least as
# close to that point as we can be before stateful is unmounted).
# Log to stderr since syslog may not be available at this stage.
crash_reporter --log_to_stderr --clean_shutdown

# Flush buffers to disk to reflect this part of shutdown in the metrics.
sync

# Measure shutdown time up to this point.
bootstat_archive "/var/log/metrics/shutdown.$(date '+%Y%m%d%H%M%S')"

# To be safe, flush buffers to disk again before unmounting. (From
# https://crbug.com/760007 it seems that a failed umount can get the filesystem
# into a state that renders a subsequent sync ineffective.)
sync

# Log all the unmount logic to a temp file and move it over to stateful if any
# of the steps failed.
(
set -x

# Unmount stateful partition for dev packages. Will be a NOP unless we're in
# dev mode.
dev_unmount_packages

# Unmount /var/run and /var/lock, which were bind mounted to /run and /run/lock
# respectively to enable backwards compatibility for accessing /run (tmpfs for
# runtime data) through /var.
umount -n /var/run /var/lock

# Unmount /var, /home and encrypted mountpoints, then try to
# unmount /mnt/stateful_partition.  Log to /mnt/stateful_partition if any of
# them failed to unmount.
# Note that the other mounts are submounts of /mnt/stateful_partition on
# regular images, but not always true on factory images.  To handle both, we
# should unmount /mnt/stateful_partition only if the others successfully
# unmounted, otherwise system may fail to log.  See crbug.com/835557.
rc=0
if [ -e /dev/mapper/encstateful ]; then
  # Give mount-encrypted umount 10 times to retry, otherwise
  # it will fail with 'device is busy' because lazy umount does not finish
  # clearing all reference points yet. Check crosbug.com/p/21345.
  for i in 1 2 3 4 5 6 7 8 9 10; do
    mount-encrypted umount
    rc="$?"
    if [ ${rc} -eq 0 ]; then
      break
    fi
    sleep 0.1
  done
  umount -n /home
  # Merge the exit status with the earlier mount-encrypted call.
  : "$(( rc |= $? ))"
else
  umount -n /var /home
  rc="$?"
fi
# Unmount /mnt/stateful_partition only if the previous unmounts succeeded.
if [ "${rc}" -eq 0 ]; then
  umount -n /mnt/stateful_partition
fi
exit "$(( rc | $? ))"
) >/run/mount_encrypted/umount-encrypted.log 2>&1

if [ "$?" -ne 0 ]; then
  # Collect information about active mount namespaces and if there are bind
  # mounts open inside these namespaces into the (enc)stateful partition.
  collect_shutdown_umount_failure_logs
  mv /run/mount_encrypted/umount-encrypted.log /mnt/stateful_partition/
  mv /run/shutdown_umount_failure.log /mnt/stateful_partition/
else
  if [ -n "${UPDATE_TARGET}" ] && [ -n "${STATE_DEV}" ]; then
    # 10756.0.0 is the first build to turn on ext4 quota.
    # See https://crrev.com/c/1016226
    # Older builds will fail to mount stateful if quota is enabled.
    # This code can be removed when we stop testing pre-R69 FSI updates.
    if [ "${UPDATE_TARGET}" -lt 10756 ]; then
      if dumpe2fs -h "${STATE_DEV}" 2>/dev/null | \
                grep -qe "^Filesystem features:.* quota.*"; then
        tune2fs -O^quota -Q^usrquota,^grpquota "${STATE_DEV}"
      fi
    fi
  fi
  rm -f /run/mount_encrypted/umount-encrypted.log
fi

# Just in case something didn't unmount properly above.
sync

# Display low battery icon if shutting down due to low battery.
# SHUTDOWN_REASON is passed in with the runlevel event from power manager.
if [ "${SHUTDOWN_REASON}" = "low-battery" ]; then
  display_low_battery_alert
fi

# Ensure that we always claim success.
exit 0