// Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "power_manager/powerd/policy/internal_backlight_controller.h"

#include <cmath>
#include <memory>
#include <string>

#include <base/logging.h>
#include <chromeos/dbus/service_constants.h>
#include <dbus/message.h>
#include <gtest/gtest.h>

#include "power_manager/common/clock.h"
#include "power_manager/common/fake_prefs.h"
#include "power_manager/common/power_constants.h"
#include "power_manager/powerd/policy/backlight_controller_observer_stub.h"
#include "power_manager/powerd/policy/backlight_controller_test_util.h"
#include "power_manager/powerd/system/ambient_light_sensor_stub.h"
#include "power_manager/powerd/system/backlight_stub.h"
#include "power_manager/powerd/system/dbus_wrapper_stub.h"
#include "power_manager/powerd/system/display/display_power_setter_stub.h"
#include "power_manager/proto_bindings/backlight.pb.h"
#include "power_manager/proto_bindings/policy.pb.h"

namespace power_manager {
namespace policy {

namespace {

// Number of ambient light sensor samples that should be supplied in order to
// trigger an update to InternalBacklightController's ALS brightness percent.
const int kAlsSamplesToTriggerAdjustment = 2;

}  // namespace

class InternalBacklightControllerTest : public ::testing::Test {
 public:
  InternalBacklightControllerTest()
      : backlight_(max_backlight_level_,
                   initial_backlight_level_,
                   system::BacklightInterface::BrightnessScale::kUnknown),
        light_sensor_(initial_als_lux_) {}

 protected:
  // Initializes |dbus_wrapper_| and |controller_| and sends the controller
  // power source and ambient light events such that it should make its first
  // adjustment to the backlight brightness. Can be called multiple times within
  // a test.
  virtual void Init(PowerSource power_source) {
    if (default_min_visible_level_ > 0) {
      prefs_.SetInt64(kMinVisibleBacklightLevelPref,
                      default_min_visible_level_);
    }
    prefs_.SetString(kInternalBacklightAlsStepsPref, default_als_steps_);
    prefs_.SetString(kInternalBacklightNoAlsAcBrightnessPref,
                     default_no_als_ac_brightness_);
    prefs_.SetString(kInternalBacklightNoAlsBatteryBrightnessPref,
                     default_no_als_battery_brightness_);
    backlight_.set_max_level(max_backlight_level_);
    backlight_.set_current_level(initial_backlight_level_);
    light_sensor_.set_lux(initial_als_lux_);
    prefs_.SetDouble(kAlsSmoothingConstantPref, 1.0);

    controller_ = std::make_unique<InternalBacklightController>();
    if (!init_time_.is_null())
      controller_->clock()->set_current_time_for_testing(init_time_);

    dbus_wrapper_ = std::make_unique<system::DBusWrapperStub>();
    controller_->Init(
        &backlight_, &prefs_, pass_light_sensor_ ? &light_sensor_ : nullptr,
        &display_power_setter_, dbus_wrapper_.get(), LidState::OPEN);

    if (report_initial_power_source_)
      controller_->HandlePowerSourceChange(power_source);
    if (pass_light_sensor_ && report_initial_als_reading_)
      light_sensor_.NotifyObservers();
  }

  // Maps |percent| to a |controller_|-designated level in the range [0,
  // max_backlight_level_].
  int64_t PercentToLevel(double percent) {
    return controller_->PercentToLevel(percent);
  }

  // Returns |controller_|'s current brightness percent.
  double GetBrightnessPercent() {
    double percent = -1.0;
    EXPECT_TRUE(controller_->GetBrightnessPercent(&percent));
    return percent;
  }

  void SetBrightnessScale(system::BacklightInterface::BrightnessScale scale) {
    backlight_.SetBrightnessScale(scale);
  }

  // Max and initial brightness levels for |backlight_|.
  int64_t max_backlight_level_ = 1024;
  int64_t initial_backlight_level_ = 512;

  // Time that should be used as "now" when |controller_| is initialized.
  // If unset, the real time will be used.
  base::TimeTicks init_time_;

  // Should Init() pass |light_sensor_| to |controller_|?
  bool pass_light_sensor_ = true;

  // Initial lux level reported by |light_sensor_|.
  int initial_als_lux_ = 0;

  // Should Init() tell |controller_| about an initial ambient light
  // reading and power source change?
  bool report_initial_als_reading_ = true;
  bool report_initial_power_source_ = true;

  // Default values for prefs. Applied when Init() is called.
  int64_t default_min_visible_level_ = -1;  // Unset if non-positive.
  std::string default_als_steps_ = "50.0 -1 400\n90.0 100 -1";
  std::string default_no_als_ac_brightness_ = "80.0";
  std::string default_no_als_battery_brightness_ = "60.0";

  FakePrefs prefs_;
  system::BacklightStub backlight_;
  system::AmbientLightSensorStub light_sensor_;
  system::DisplayPowerSetterStub display_power_setter_;
  std::unique_ptr<system::DBusWrapperStub> dbus_wrapper_;
  std::unique_ptr<InternalBacklightController> controller_;
};

TEST_F(InternalBacklightControllerTest, IncreaseAndDecreaseBrightness) {
  default_min_visible_level_ = 100;
  default_als_steps_ = "50.0 -1 -1";
  Init(PowerSource::BATTERY);
  ASSERT_EQ(default_min_visible_level_,
            PercentToLevel(InternalBacklightController::kMinVisiblePercent));
  const int64_t kAlsLevel = PercentToLevel(50.0);
  EXPECT_EQ(kAlsLevel, backlight_.current_level());

  // Check that the first step increases the brightness and emits a signal;
  // within the loop we'll just ensure that the brightness never decreases.
  dbus_wrapper_->ClearSentSignals();
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_GT(backlight_.current_level(), kAlsLevel);
  test::CheckBrightnessChangedSignal(
      dbus_wrapper_.get(), 0, kScreenBrightnessChangedSignal,
      GetBrightnessPercent(), BacklightBrightnessChange_Cause_USER_REQUEST);
  for (int i = 0; i < InternalBacklightController::kMaxBrightnessSteps; ++i) {
    int64_t old_level = backlight_.current_level();
    test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
    EXPECT_GE(backlight_.current_level(), old_level);
  }
  EXPECT_EQ(max_backlight_level_, backlight_.current_level());

  // A no-op increase should still emit a signal.
  dbus_wrapper_->ClearSentSignals();
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  test::CheckBrightnessChangedSignal(
      dbus_wrapper_.get(), 0, kScreenBrightnessChangedSignal, 100.0,
      BacklightBrightnessChange_Cause_USER_REQUEST);

  // Now do the same checks in the opposite direction.  The controller
  // should stop at the minimum visible level if |allow_off| is false.
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(),
                                     false /* allow_off */);
  EXPECT_LT(backlight_.current_level(), max_backlight_level_);
  for (int i = 0; i < InternalBacklightController::kMaxBrightnessSteps; ++i) {
    int64_t old_level = backlight_.current_level();
    test::CallDecreaseScreenBrightness(dbus_wrapper_.get(),
                                       false /* allow_off */);
    EXPECT_LE(backlight_.current_level(), old_level);
  }
  EXPECT_EQ(default_min_visible_level_, backlight_.current_level());

  // One more request with |allow_off| should go to 0.
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(kFastBacklightTransitionMs,
            display_power_setter_.delay().InMilliseconds());

  // One increase request should raise the brightness to the minimum
  // visible level, while a second one should increase it above that.
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_EQ(default_min_visible_level_, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_GT(backlight_.current_level(), default_min_visible_level_);

  // Start at 3/4 of a step above the middle step. After a decrease request, the
  // brightness should be snapped to the middle step.
  const double kStep = 100.0 / InternalBacklightController::kMaxBrightnessSteps;
  const double kMiddlePercent =
      kStep * InternalBacklightController::kMaxBrightnessSteps / 2;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kMiddlePercent + 0.75 * kStep,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(PercentToLevel(kMiddlePercent + 0.75 * kStep),
            backlight_.current_level());
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  EXPECT_EQ(PercentToLevel(kMiddlePercent), backlight_.current_level());

  // Start at 1/4 of a step below the middle step. After an increase request,
  // the brightness should be snapped to one step above the middle step.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kMiddlePercent - 0.25 * kStep,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(PercentToLevel(kMiddlePercent - 0.25 * kStep),
            backlight_.current_level());
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_EQ(PercentToLevel(kMiddlePercent + kStep), backlight_.current_level());
}

// Test that InternalBacklightController notifies its observer in response to
// brightness changes.
TEST_F(InternalBacklightControllerTest, NotifyObserver) {
  default_min_visible_level_ = 100;
  default_als_steps_ = "50.0 -1 200\n75.0 100 -1";
  Init(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(50.0), backlight_.current_level());

  BacklightControllerObserverStub observer;
  controller_->AddObserver(&observer);

  // Send enough ambient light sensor samples to trigger a brightness change.
  observer.Clear();
  int64_t old_level = backlight_.current_level();
  light_sensor_.set_lux(300);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  ASSERT_NE(old_level, backlight_.current_level());
  ASSERT_EQ(1, static_cast<int>(observer.changes().size()));
  EXPECT_EQ(backlight_.current_level(),
            PercentToLevel(observer.changes()[0].percent));
  EXPECT_EQ(BacklightBrightnessChange_Cause_AMBIENT_LIGHT_CHANGED,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // Increase the brightness and check that the observer is notified.
  observer.Clear();
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  ASSERT_EQ(1, static_cast<int>(observer.changes().size()));
  EXPECT_EQ(backlight_.current_level(),
            PercentToLevel(observer.changes()[0].percent));
  EXPECT_EQ(BacklightBrightnessChange_Cause_USER_REQUEST,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // Decrease the brightness.
  observer.Clear();
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  ASSERT_EQ(1, static_cast<int>(observer.changes().size()));
  EXPECT_EQ(backlight_.current_level(),
            PercentToLevel(observer.changes()[0].percent));
  EXPECT_EQ(BacklightBrightnessChange_Cause_USER_REQUEST,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // Set the brightness to a lower level.
  observer.Clear();
  const double kLowPercent = 40.0;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kLowPercent,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(1, static_cast<int>(observer.changes().size()));
  EXPECT_EQ(backlight_.current_level(),
            PercentToLevel(observer.changes()[0].percent));
  EXPECT_EQ(BacklightBrightnessChange_Cause_USER_REQUEST,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // Dim the backlight.
  observer.Clear();
  controller_->SetDimmedForInactivity(true);
  ASSERT_EQ(1, static_cast<int>(observer.changes().size()));
  EXPECT_EQ(backlight_.current_level(),
            PercentToLevel(observer.changes()[0].percent));
  EXPECT_EQ(BacklightBrightnessChange_Cause_USER_INACTIVITY,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  controller_->RemoveObserver(&observer);
}

// Test the case where the minimum visible backlight level matches the maximum
// level exposed by hardware.
TEST_F(InternalBacklightControllerTest, MinBrightnessLevelMatchesMax) {
  default_min_visible_level_ = max_backlight_level_;
  Init(PowerSource::AC);

  // Decrease the brightness with allow_off=false.
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(),
                                     false /* allow_off */);
  EXPECT_EQ(default_min_visible_level_, backlight_.current_level());

  // Decrease again with allow_off=true.
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  EXPECT_EQ(0, backlight_.current_level());
}

// Test the saved brightness level before and after suspend.
TEST_F(InternalBacklightControllerTest, SuspendBrightnessLevel) {
  Init(PowerSource::AC);
  const int64_t initial_level = backlight_.current_level();

  // Test suspend and resume.  When suspending, the previously-current
  // brightness level should be saved as the resume level.
  display_power_setter_.reset_num_power_calls();
  controller_->SetSuspended(true);
  EXPECT_EQ(0, display_power_setter_.num_power_calls());
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());

  controller_->SetSuspended(false);
  EXPECT_EQ(initial_level, backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());

  // Test idling into suspend state.  The backlight should be at 0% after the
  // display is turned off.
  controller_->SetDimmedForInactivity(true);
  EXPECT_LT(backlight_.current_level(), initial_level);

  // The displays are turned off for the idle-off state.
  controller_->SetOffForInactivity(true);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());

  // The power manager shouldn't change the display power before
  // suspending; Chrome will turn the displays on (without any involvement
  // from powerd) so that they come back up in the correct state after
  // resuming.
  display_power_setter_.reset_num_power_calls();
  controller_->SetSuspended(true);
  EXPECT_EQ(0, display_power_setter_.num_power_calls());
  EXPECT_EQ(0, backlight_.current_level());

  // Test resume.
  controller_->SetDimmedForInactivity(false);
  controller_->SetOffForInactivity(false);
  controller_->SetSuspended(false);
  EXPECT_EQ(initial_level, backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
}

// Test that we use a linear mapping between brightness levels and percentages
// when a small range of levels is exposed by the hardware.
TEST_F(InternalBacklightControllerTest, LinearMappingForSmallBacklightRange) {
  max_backlight_level_ = initial_backlight_level_ = 10;
  Init(PowerSource::BATTERY);

  // The minimum visible level should use the bottom brightness step's
  // percentage, and above it, there should be a linear mapping between levels
  // and percentages.
  const double kMinVisiblePercent =
      InternalBacklightController::kMinVisiblePercent;
  for (int i = 1; i <= max_backlight_level_; ++i) {
    double percent = kMinVisiblePercent + (100.0 - kMinVisiblePercent) *
                                              (i - 1) /
                                              (max_backlight_level_ - 1);
    EXPECT_EQ(static_cast<int64_t>(i), PercentToLevel(percent));
  }
}

TEST_F(InternalBacklightControllerTest, NonLinearMapping) {
  // We should use a non-linear mapping that provides more granularity at
  // the bottom end when a large range is exposed.
  max_backlight_level_ = initial_backlight_level_ = 1000;
  Init(PowerSource::BATTERY);

  EXPECT_EQ(0, PercentToLevel(0.0));
  EXPECT_LT(PercentToLevel(50.0), max_backlight_level_ / 2);
  EXPECT_EQ(max_backlight_level_, PercentToLevel(100.0));
}

TEST_F(InternalBacklightControllerTest, TestBrightnessScale) {
  // Test that |level_to_percent_exponent_| is selected correctly based
  // on BrightnessScale.
  max_backlight_level_ = 4095;
  SetBrightnessScale(system::BacklightInterface::BrightnessScale::kLinear);
  Init(PowerSource::BATTERY);
  EXPECT_EQ(1713, PercentToLevel(66.6));
  SetBrightnessScale(system::BacklightInterface::BrightnessScale::kNonLinear);
  Init(PowerSource::BATTERY);
  EXPECT_EQ(2646, PercentToLevel(66.6));
  SetBrightnessScale(system::BacklightInterface::BrightnessScale::kUnknown);
  Init(PowerSource::BATTERY);
  EXPECT_EQ(1713, PercentToLevel(66.6));
  max_backlight_level_ =
      InternalBacklightController::kMinLevelsForNonLinearMapping - 1;
  Init(PowerSource::BATTERY);
  EXPECT_EQ(64, PercentToLevel(66.6));
}

TEST_F(InternalBacklightControllerTest, AmbientLightTransitions) {
  initial_backlight_level_ = max_backlight_level_;
  default_als_steps_ = "50.0 -1 200\n75.0 100 -1";
  report_initial_als_reading_ = false;
  Init(PowerSource::AC);

  // The controller should leave the initial brightness unchanged before it's
  // received a reading from the ambient light sensor.
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());

  // After getting the first reading from the sensor, we should do a slow
  // transition to the lower level. The initial adjustment doesn't contribute to
  // the adjustment count.
  light_sensor_.NotifyObservers();
  EXPECT_EQ(PercentToLevel(50.0), backlight_.current_level());
  EXPECT_EQ(kSlowBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());

  // Pass a bunch of higher readings and check that we slowly increase the
  // brightness.
  light_sensor_.set_lux(400);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  EXPECT_EQ(PercentToLevel(75.0), backlight_.current_level());
  EXPECT_EQ(kSlowBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());
  EXPECT_EQ(1, controller_->GetNumAmbientLightSensorAdjustments());

  // Check that the adjustment count is reset when a new session starts.
  controller_->HandleSessionStateChange(SessionState::STARTED);
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());
}

TEST_F(InternalBacklightControllerTest, PowerSourceChangeNotReportedAsAmbient) {
  // Set a single step for ambient-light-controlled brightness levels, using 60%
  // while on AC and 50% while on battery.
  initial_backlight_level_ = max_backlight_level_;
  default_als_steps_ = "60.0 50.0 -1 -1";
  Init(PowerSource::AC);
  ASSERT_EQ(PercentToLevel(60.0), backlight_.current_level());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());

  // The brightness should be updated after switching to battery power, but the
  // change shouldn't be reported as having been triggered by the ambient light
  // sensor.
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  ASSERT_EQ(PercentToLevel(50.0), backlight_.current_level());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());
}

TEST_F(InternalBacklightControllerTest, TurnDisplaysOffWhenShuttingDown) {
  Init(PowerSource::AC);

  // When the backlight controller is told that the system is shutting down, it
  // should turn off all displays.
  controller_->SetShuttingDown(true);
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());

  // This isn't expected, but if the state changes after we start shutting down,
  // the displays should be turned back on.
  controller_->SetShuttingDown(false);
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
}

// Test that HandlePowerSourceChange() uses the same user-set brightness level
// when the computer is plugged and unplugged.
TEST_F(InternalBacklightControllerTest, TestPlugAndUnplug) {
  Init(PowerSource::BATTERY);

  // A custom level set while using battery power should be used after switching
  // to AC.
  const double kFirstPercent = 40.0;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kFirstPercent,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  EXPECT_EQ(PercentToLevel(kFirstPercent), backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(kFirstPercent), backlight_.current_level());

  // Ditto for switching from AC to battery.
  const double kSecondPercent = 60.0;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kSecondPercent,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  EXPECT_EQ(PercentToLevel(kSecondPercent), backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(kSecondPercent), backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, TestDimming) {
  default_als_steps_ = "50.0 -1 200\n75.0 100 -1";
  Init(PowerSource::AC);
  int64_t bottom_als_level = PercentToLevel(50.0);
  EXPECT_EQ(bottom_als_level, backlight_.current_level());

  controller_->SetDimmedForInactivity(true);
  int64_t dimmed_level = backlight_.current_level();
  EXPECT_LT(dimmed_level, bottom_als_level);
  EXPECT_GT(dimmed_level, 0);
  EXPECT_EQ(kFastBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());

  // A second dim request shouldn't change the level.
  controller_->SetDimmedForInactivity(true);
  EXPECT_EQ(dimmed_level, backlight_.current_level());

  // Ambient light readings shouldn't change the backlight level while it's
  // dimmed.
  light_sensor_.set_lux(400);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  EXPECT_EQ(dimmed_level, backlight_.current_level());

  // After leaving the dimmed state, the updated ALS level should be used.
  controller_->SetDimmedForInactivity(false);
  EXPECT_EQ(PercentToLevel(75.0), backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());

  // User requests shouldn't change the brightness while dimmed either.
  controller_->SetDimmedForInactivity(true);
  EXPECT_EQ(dimmed_level, backlight_.current_level());
  const double kNewUserOffset = 67.0;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kNewUserOffset,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  EXPECT_EQ(dimmed_level, backlight_.current_level());

  // After leaving the dimmed state, the updated user level should be used.
  controller_->SetDimmedForInactivity(false);
  EXPECT_EQ(PercentToLevel(kNewUserOffset), backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());

  // If the brightness is already below the dimmed level, it shouldn't be
  // changed when dimming is requested.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), InternalBacklightController::kMinVisiblePercent,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  int64_t new_undimmed_level = backlight_.current_level();
  ASSERT_LT(new_undimmed_level, dimmed_level);
  controller_->SetDimmedForInactivity(true);
  EXPECT_EQ(new_undimmed_level, backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, UserLevelOverridesAmbientLight) {
  default_als_steps_ = "50.0 -1 200\n75.0 100 -1";
  Init(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(50.0), backlight_.current_level());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());
  EXPECT_EQ(0, controller_->GetNumUserAdjustments());

  const double kUserPercent = 80.0;
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), kUserPercent,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  EXPECT_EQ(PercentToLevel(kUserPercent), backlight_.current_level());
  EXPECT_EQ(1, controller_->GetNumUserAdjustments());

  // Changes to the ambient light level shouldn't affect the backlight
  // brightness after the user has manually set it.
  light_sensor_.set_lux(400);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  EXPECT_EQ(PercentToLevel(kUserPercent), backlight_.current_level());
  EXPECT_EQ(0, controller_->GetNumAmbientLightSensorAdjustments());

  // Starting a new session should reset the user adjustment count.
  controller_->HandleSessionStateChange(SessionState::STARTED);
  EXPECT_EQ(0, controller_->GetNumUserAdjustments());
}

TEST_F(InternalBacklightControllerTest, DeferInitialAdjustment) {
  // The brightness level should remain unchanged when the power source and
  // initial ambient light reading haven't been received.
  report_initial_power_source_ = false;
  report_initial_als_reading_ = false;
  default_als_steps_ = "50.0 -1 -1";
  Init(PowerSource::AC);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());

  // Send the power source; the level still shouldn't change.
  controller_->HandlePowerSourceChange(PowerSource::AC);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());

  // After the ambient light level is also received, the backlight should
  // slowly transition to the ALS-derived level.
  light_sensor_.NotifyObservers();
  EXPECT_EQ(PercentToLevel(50.0), backlight_.current_level());
  EXPECT_EQ(kSlowBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());
}

TEST_F(InternalBacklightControllerTest, NoAmbientLightSensor) {
  pass_light_sensor_ = false;
  report_initial_power_source_ = false;
  report_initial_als_reading_ = false;
  default_no_als_ac_brightness_ = "95.0";
  default_no_als_battery_brightness_ = "75.0";
  Init(PowerSource::AC);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());

  // The brightness percentages from the "no ALS" prefs should be used as
  // starting points when there's no ALS.
  controller_->HandlePowerSourceChange(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(95.0), backlight_.current_level());

  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(75.0), backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, NoAmbientLightSensorMultipleDefaults) {
  // Test that different default brightness percentages can be specified for
  // different maximum luminances (http://crosbug.com/p/28715).
  pass_light_sensor_ = false;
  report_initial_als_reading_ = false;
  default_no_als_ac_brightness_ = "40.0 300\n50.0 400\n30.0";
  default_no_als_battery_brightness_ = "35.0 400\n25.0 300\n15.0\n";

  Init(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(30.0), backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(15.0), backlight_.current_level());

  prefs_.SetInt64(kInternalBacklightMaxNitsPref, 300);
  Init(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(40.0), backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(25.0), backlight_.current_level());

  prefs_.SetInt64(kInternalBacklightMaxNitsPref, 400);
  Init(PowerSource::AC);
  EXPECT_EQ(PercentToLevel(50.0), backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(35.0), backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, ForceBacklightOnForUserActivity) {
  // Set the brightness to zero and check that it's increased to the
  // minimum visible level when the session state changes.
  Init(PowerSource::AC);
  const int kMinVisibleLevel =
      PercentToLevel(InternalBacklightController::kMinVisiblePercent);
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleSessionStateChange(SessionState::STARTED);
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());

  // Pressing the power button should also increase the brightness.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandlePowerButtonPress();
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());

  // Same for a wake notification.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleWakeNotification();
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());

  // Ditto for most user activity.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_OTHER);
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());

  // Both the explicit AC and battery brightness should have been updated
  // (http://crbug.com/507944).
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());

  // User activity corresponding to brightness- or volume-related key presses
  // shouldn't increase the brightness, though.
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_BRIGHTNESS_UP_KEY_PRESS);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_BRIGHTNESS_DOWN_KEY_PRESS);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_VOLUME_UP_KEY_PRESS);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_VOLUME_DOWN_KEY_PRESS);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_VOLUME_MUTE_KEY_PRESS);
  EXPECT_EQ(0, backlight_.current_level());

  // Enter presentation mode.  The same actions that forced the backlight
  // on before shouldn't do anything now; turning the panel back on while a
  // second display is connected would resize the desktop.
  controller_->HandleDisplayModeChange(DisplayMode::PRESENTATION);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleSessionStateChange(SessionState::STOPPED);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandlePowerButtonPress();
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_OTHER);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleWakeNotification();
  EXPECT_EQ(0, backlight_.current_level());

  // The backlight should be turned on after exiting presentation mode.
  controller_->HandleDisplayModeChange(DisplayMode::NORMAL);
  EXPECT_EQ(kMinVisibleLevel, backlight_.current_level());

  // Send a policy disabling the forcing behavior and check that the brightness
  // remains at 0 after explicitly setting it to 0.
  PowerManagementPolicy policy;
  policy.set_force_nonzero_brightness_for_user_activity(false);
  controller_->HandlePolicyChange(policy);
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  ASSERT_EQ(0, backlight_.current_level());
  controller_->HandleSessionStateChange(SessionState::STARTED);
  controller_->HandlePowerButtonPress();
  controller_->HandleUserActivity(USER_ACTIVITY_OTHER);
  controller_->HandleWakeNotification();
  EXPECT_EQ(0, backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, DockedMode) {
  Init(PowerSource::AC);
  const int64_t initial_level = backlight_.current_level();
  ASSERT_GT(initial_level, 0);

  controller_->HandleLidStateChange(LidState::CLOSED);
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
  EXPECT_EQ(0, backlight_.current_level());

  // Increasing the brightness or dimming the backlight shouldn't change
  // the displays' power settings while docked.
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(0, backlight_.current_level());
  controller_->SetDimmedForInactivity(true);
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(0, backlight_.current_level());

  // The external display should still be turned off for inactivity.
  controller_->SetOffForInactivity(true);
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());
  EXPECT_EQ(0, backlight_.current_level());
  controller_->SetOffForInactivity(false);
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(0, backlight_.current_level());

  // After exiting docked mode, the internal display should be turned back on
  // and the backlight should be at the dimmed level.
  controller_->HandleLidStateChange(LidState::OPEN);
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
  EXPECT_GT(backlight_.current_level(), 0);
  EXPECT_LT(backlight_.current_level(), initial_level);
}

TEST_F(InternalBacklightControllerTest, GiveUpOnBrokenAmbientLightSensor) {
  // Don't report any ambient light readings. As before, the controller
  // should avoid changing the backlight from its initial brightness.
  init_time_ = base::TimeTicks::FromInternalValue(1000);
  report_initial_als_reading_ = false;
  Init(PowerSource::AC);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());
  controller_->HandlePowerSourceChange(PowerSource::AC);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());

  // After the timeout has elapsed, state changes (like dimming due to
  // inactivity) should be honored.
  const base::TimeTicks kUpdateTime =
      init_time_ +
      base::TimeDelta::FromSeconds(
          InternalBacklightController::kAmbientLightSensorTimeoutSec);
  controller_->clock()->set_current_time_for_testing(kUpdateTime);
  controller_->SetDimmedForInactivity(true);
  EXPECT_LT(backlight_.current_level(), initial_backlight_level_);
}

TEST_F(InternalBacklightControllerTest, UserAdjustmentBeforeAmbientLight) {
  report_initial_als_reading_ = false;
  Init(PowerSource::AC);
  ASSERT_EQ(initial_backlight_level_, backlight_.current_level());

  // Check that a decrease request actually decreases the brightness (i.e. the
  // initial backlight level, rather than 100%, is used as the starting point
  // when the ambient light level hasn't been received yet). See
  // http://crosbug.com/p/22380.
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  EXPECT_LT(backlight_.current_level(), initial_backlight_level_);
}

TEST_F(InternalBacklightControllerTest,
       DockedNotificationReceivedBeforeAmbientLight) {
  // Send a docked-mode request before the first ambient light reading.
  report_initial_als_reading_ = false;
  Init(PowerSource::AC);
  controller_->HandleLidStateChange(LidState::CLOSED);
  EXPECT_EQ(initial_backlight_level_, backlight_.current_level());

  // Check that the system goes into docked mode after an ambient light
  // reading is received.
  light_sensor_.NotifyObservers();
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());
}

TEST_F(InternalBacklightControllerTest, BrightnessPolicy) {
  default_als_steps_ = "50.0 -1 200\n90.0 100 -1";
  Init(PowerSource::AC);
  ASSERT_EQ(PercentToLevel(50.0), backlight_.current_level());

  BacklightControllerObserverStub observer;
  controller_->AddObserver(&observer);

  // When an AC brightness policy is sent while on AC power, the brightness
  // should change immediately.
  PowerManagementPolicy policy;
  policy.set_ac_brightness_percent(75.0);
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(PercentToLevel(75.0), backlight_.current_level());
  EXPECT_EQ(kFastBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());
  ASSERT_EQ(static_cast<size_t>(1), observer.changes().size());
  EXPECT_EQ(BacklightBrightnessChange_Cause_OTHER, observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // Passing a battery policy while on AC shouldn't do anything.
  observer.Clear();
  policy.Clear();
  policy.set_battery_brightness_percent(43.0);
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(PercentToLevel(75.0), backlight_.current_level());
  EXPECT_EQ(static_cast<size_t>(0), observer.changes().size());

  // The previously-set brightness should be used after switching to battery.
  observer.Clear();
  controller_->HandlePowerSourceChange(PowerSource::BATTERY);
  EXPECT_EQ(PercentToLevel(43.0), backlight_.current_level());
  ASSERT_EQ(static_cast<size_t>(1), observer.changes().size());
  EXPECT_EQ(BacklightBrightnessChange_Cause_EXTERNAL_POWER_DISCONNECTED,
            observer.changes()[0].cause);
  EXPECT_EQ(controller_.get(), observer.changes()[0].source);

  // An empty policy shouldn't do anything.
  observer.Clear();
  policy.Clear();
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(PercentToLevel(43.0), backlight_.current_level());
  EXPECT_EQ(static_cast<size_t>(0), observer.changes().size());

  // Ambient light readings shouldn't affect the brightness after it's been set
  // via a policy.
  observer.Clear();
  light_sensor_.set_lux(400);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  EXPECT_EQ(PercentToLevel(43.0), backlight_.current_level());
  EXPECT_EQ(static_cast<size_t>(0), observer.changes().size());

  // Set the brightness to 0% and check that the actions that usually turn the
  // screen back on don't do anything.
  policy.Clear();
  policy.set_battery_brightness_percent(0.0);
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleSessionStateChange(SessionState::STARTED);
  controller_->HandlePowerButtonPress();
  controller_->HandleUserActivity(USER_ACTIVITY_OTHER);
  controller_->HandleWakeNotification();
  EXPECT_EQ(0, backlight_.current_level());

  // After sending an empty policy, user activity should increase the
  // brightness from 0%.
  policy.Clear();
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleUserActivity(USER_ACTIVITY_OTHER);
  EXPECT_GT(backlight_.current_level(), 0);

  // Set the brightness to 0% and send an empty policy again. This time check
  // that a wake notification should increase the brightness from 0%.
  policy.Clear();
  policy.set_battery_brightness_percent(0.0);
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(0, backlight_.current_level());
  policy.Clear();
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandleWakeNotification();
  EXPECT_GT(backlight_.current_level(), 0);

  // After a policy sets the brightness to 0%, the brightness keys should still
  // work, and after user-triggered adjustments are made, hitting the power
  // button should turn the backlight on.
  policy.Clear();
  policy.set_battery_brightness_percent(0.0);
  controller_->HandlePolicyChange(policy);
  EXPECT_EQ(0, backlight_.current_level());
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_GT(backlight_.current_level(), 0);
  test::CallDecreaseScreenBrightness(dbus_wrapper_.get(), true /* allow_off */);
  EXPECT_EQ(0, backlight_.current_level());
  controller_->HandlePowerButtonPress();
  EXPECT_GT(backlight_.current_level(), 0);

  controller_->RemoveObserver(&observer);
}

TEST_F(InternalBacklightControllerTest, SetPowerOnDisplayServiceStart) {
  // Init() shouldn't ask Chrome to turn all displays on (maybe Chrome hasn't
  // started yet).
  Init(PowerSource::AC);
  EXPECT_EQ(0, display_power_setter_.num_power_calls());

  // After Chrome starts, the controller should turn the displays on.
  display_power_setter_.reset_num_power_calls();
  controller_->HandleDisplayServiceStart();
  EXPECT_EQ(1, display_power_setter_.num_power_calls());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_ON, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());

  // Enter docked mode.
  controller_->HandleLidStateChange(LidState::CLOSED);
  ASSERT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());

  // If Chrome restarts, the controller should notify it about the current power
  // state.
  display_power_setter_.reset_num_power_calls();
  controller_->HandleDisplayServiceStart();
  EXPECT_EQ(1, display_power_setter_.num_power_calls());
  EXPECT_EQ(chromeos::DISPLAY_POWER_INTERNAL_OFF_EXTERNAL_ON,
            display_power_setter_.state());
}

TEST_F(InternalBacklightControllerTest, MinVisibleLevelPrefUndercutsDefault) {
  // Set the min-visible-level pref below the computed default.
  int64_t computed_min = static_cast<int64_t>(
      lround(InternalBacklightController::kDefaultMinVisibleBrightnessFraction *
             max_backlight_level_));
  default_min_visible_level_ = static_cast<int64_t>(computed_min * 0.5);
  ASSERT_GT(default_min_visible_level_, 0);
  ASSERT_LT(default_min_visible_level_, computed_min);

  // Set the brightness to 0%, increase it one step, and confirm that the level
  // configured by the pref is used instead of the higher computed default.
  Init(PowerSource::AC);
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0.0,
      SetBacklightBrightnessRequest_Transition_INSTANT,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  test::CallIncreaseScreenBrightness(dbus_wrapper_.get());
  EXPECT_EQ(default_min_visible_level_, backlight_.current_level());
}

TEST_F(InternalBacklightControllerTest, PreemptTransitionForShutdown) {
  // Start a user-requested transition to 0.
  Init(PowerSource::AC);
  test::CallSetScreenBrightness(
      dbus_wrapper_.get(), 0, SetBacklightBrightnessRequest_Transition_FAST,
      SetBacklightBrightnessRequest_Cause_USER_REQUEST);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(kFastBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());

  // Shut the system down and check that the transition is interrupted in favor
  // of setting the backlight to 0 immediately.
  backlight_.set_transition_in_progress(true);
  controller_->SetShuttingDown(true);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());
}

TEST_F(InternalBacklightControllerTest, SetDisplayPowerBeforeBrightness) {
  // Tell the backlight and DisplayPowerSetter to use the same clock for
  // recording calls, and configure the clock to return increasing values.
  Clock clock;
  clock.set_current_time_for_testing(base::TimeTicks::FromInternalValue(1000));
  clock.set_time_step_for_testing(base::TimeDelta::FromMilliseconds(1));
  backlight_.set_clock(&clock);
  display_power_setter_.set_clock(&clock);

  Init(PowerSource::AC);

  // Dim the backlight and then turn the display off. powerd should instruct the
  // display to turn off before it sets the backlight to zero.
  controller_->SetDimmedForInactivity(true);
  const base::TimeTicks dim_time = backlight_.last_set_brightness_level_time();
  controller_->SetOffForInactivity(true);
  const base::TimeTicks off_time =
      display_power_setter_.last_set_display_power_time();
  const base::TimeTicks zero_time = backlight_.last_set_brightness_level_time();
  EXPECT_GT(off_time.ToInternalValue(), dim_time.ToInternalValue());
  EXPECT_GT(zero_time.ToInternalValue(), off_time.ToInternalValue());

  // Suspend and start the resume process. Nothing should change yet since the
  // display was already (and is still) turned off for inactivity.
  controller_->SetSuspended(true);
  controller_->SetSuspended(false);
  controller_->SetDimmedForInactivity(false);
  EXPECT_EQ(
      off_time.ToInternalValue(),
      display_power_setter_.last_set_display_power_time().ToInternalValue());
  EXPECT_EQ(zero_time.ToInternalValue(),
            backlight_.last_set_brightness_level_time().ToInternalValue());

  // Check that the display is turned on before the backlight level is restored.
  controller_->SetOffForInactivity(false);
  const base::TimeTicks on_time =
      display_power_setter_.last_set_display_power_time();
  const base::TimeTicks undim_time =
      backlight_.last_set_brightness_level_time();
  EXPECT_GT(on_time.ToInternalValue(), zero_time.ToInternalValue());
  EXPECT_GT(undim_time.ToInternalValue(), on_time.ToInternalValue());

  backlight_.set_clock(nullptr);
  display_power_setter_.set_clock(nullptr);
}

TEST_F(InternalBacklightControllerTest, ForcedOff) {
  default_als_steps_ = "50.0 -1 200\n75.0 100 -1";
  Init(PowerSource::AC);
  ASSERT_GT(backlight_.current_level(), 0);

  // When SetForcedOff() is called, both the backlight and display should turn
  // off immediately.
  controller_->SetForcedOff(true);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());
  EXPECT_EQ(0, display_power_setter_.delay().InMilliseconds());

  // The screen should stay off even if we would otherwise adjust its brightness
  // due to a change in ambient light: https://crbug.com/747165
  light_sensor_.set_lux(300);
  for (int i = 0; i < kAlsSamplesToTriggerAdjustment; ++i)
    light_sensor_.NotifyObservers();
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());

  // While the display is still forced off, also turn it off for inactivity.
  controller_->SetOffForInactivity(true);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());

  // Stop forcing it off and check that it remains off due to inactivity.
  controller_->SetForcedOff(false);
  EXPECT_EQ(0, backlight_.current_level());
  EXPECT_EQ(chromeos::DISPLAY_POWER_ALL_OFF, display_power_setter_.state());

  // When activity is seen, the backlight and display should be turned on again.
  controller_->SetOffForInactivity(false);
  EXPECT_GT(backlight_.current_level(), 0);
  EXPECT_EQ(0, backlight_.current_interval().InMilliseconds());
}

TEST_F(InternalBacklightControllerTest, SetAndGetBrightness) {
  Init(PowerSource::AC);
  dbus_wrapper_->ClearSentSignals();

  // Set the brightness to a known percent.
  const double kBrightnessPercent = 55.0;
  test::CallSetScreenBrightness(dbus_wrapper_.get(), kBrightnessPercent,
                                SetBacklightBrightnessRequest_Transition_FAST,
                                SetBacklightBrightnessRequest_Cause_MODEL);
  double percent = 0.0;
  ASSERT_TRUE(controller_->GetBrightnessPercent(&percent));
  ASSERT_DOUBLE_EQ(round(kBrightnessPercent), round(percent));
  EXPECT_EQ(kFastBacklightTransitionMs,
            backlight_.current_interval().InMilliseconds());

  // A signal should've been emitted with the appropriate cause.
  test::CheckBrightnessChangedSignal(
      dbus_wrapper_.get(), 0, kScreenBrightnessChangedSignal,
      kBrightnessPercent, BacklightBrightnessChange_Cause_MODEL);

  // Check that the same percent is returned.
  dbus::MethodCall method_call(kPowerManagerInterface,
                               kGetScreenBrightnessPercentMethod);
  std::unique_ptr<dbus::Response> response =
      dbus_wrapper_->CallExportedMethodSync(&method_call);
  ASSERT_TRUE(response);
  dbus::MessageReader reader(response.get());
  ASSERT_TRUE(reader.PopDouble(&percent));
  EXPECT_DOUBLE_EQ(round(kBrightnessPercent), round(percent));
}

}  // namespace policy
}  // namespace power_manager