/* Copyright (c) 2014 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/* Non-volatile storage routines */

#include "2sysincludes.h"
#include "2common.h"
#include "2crc8.h"
#include "2misc.h"
#include "2nvstorage.h"

/*
 * Constants for NV storage.  We use this rather than structs and bitfields so
 * the data format is consistent across platforms and compilers.  Total NV
 * storage size is VB2_NVDATA_SIZE = 16 bytes.
 *
 * These constants must match the equivalent constants in
 * lib/vboot_nvstorage.c.  (We currently don't share a common header file
 * because we're tring to keep the two libs independent, and we hope to
 * deprecate that one.)
 */

enum vb2_nv_offset {
	VB2_NV_OFFS_HEADER = 0,
	VB2_NV_OFFS_BOOT = 1,
	VB2_NV_OFFS_RECOVERY = 2,
	VB2_NV_OFFS_LOCALIZATION = 3,
	VB2_NV_OFFS_DEV = 4,
	VB2_NV_OFFS_TPM = 5,
	VB2_NV_OFFS_RECOVERY_SUBCODE = 6,
	VB2_NV_OFFS_BOOT2 = 7,
	/* Offsets 7-10 are currently unused */
	VB2_NV_OFFS_KERNEL = 11, /* 11-14; field is 32 bits */
	/* CRC must be last field */
	VB2_NV_OFFS_CRC = 15
};

/* Fields in VB2_NV_OFFS_HEADER (unused = 0x0f) */
#define VB2_NV_HEADER_KERNEL_SETTINGS_RESET    0x10
#define VB2_NV_HEADER_FW_SETTINGS_RESET        0x20
#define VB2_NV_HEADER_SIGNATURE                0x40
#define VB2_NV_HEADER_MASK                     0xc0

/* Fields in VB2_NV_OFFS_BOOT */
#define VB2_NV_BOOT_TRY_COUNT_MASK             0x0f
#define VB2_NV_BOOT_BACKUP_NVRAM               0x10
#define VB2_NV_BOOT_OPROM_NEEDED               0x20
#define VB2_NV_BOOT_DISABLE_DEV                0x40
#define VB2_NV_BOOT_DEBUG_RESET                0x80

/* Fields in VB2_NV_OFFS_BOOT2 (unused = 0xf0) */
#define VB2_NV_BOOT2_RESULT_MASK               0x03
#define VB2_NV_BOOT2_TRIED                     0x04
#define VB2_NV_BOOT2_TRY_NEXT                  0x08

/* Fields in VB2_NV_OFFS_DEV (unused = 0xf8) */
#define VB2_NV_DEV_FLAG_USB                    0x01
#define VB2_NV_DEV_FLAG_SIGNED_ONLY            0x02
#define VB2_NV_DEV_FLAG_LEGACY                 0x04

/* Fields in VB2_NV_OFFS_TPM (unused = 0xfc) */
#define VB2_NV_TPM_CLEAR_OWNER_REQUEST         0x01
#define VB2_NV_TPM_CLEAR_OWNER_DONE            0x02

static void vb2_nv_regen_crc(struct vb2_context *ctx)
{
	ctx->nvdata[VB2_NV_OFFS_CRC] = vb2_crc8(ctx->nvdata, VB2_NV_OFFS_CRC);
	ctx->flags |= VB2_CONTEXT_NVDATA_CHANGED;
}

/**
 * Check the CRC of the non-volatile storage context.
 *
 * Use this if reading from non-volatile storage may be flaky, and you want to
 * retry reading it several times.
 *
 * This may be called before vb2_context_init().
 *
 * @param ctx		Context pointer
 * @return VB2_SUCCESS, or non-zero error code if error.
 */
int vb2_nv_check_crc(const struct vb2_context *ctx)
{
	const uint8_t *p = ctx->nvdata;

	/* Check header */
	if (VB2_NV_HEADER_SIGNATURE !=
	    (p[VB2_NV_OFFS_HEADER] & VB2_NV_HEADER_MASK))
		return VB2_ERROR_NV_HEADER;

	/* Check CRC */
	if (vb2_crc8(p, VB2_NV_OFFS_CRC) != p[VB2_NV_OFFS_CRC])
		return VB2_ERROR_NV_CRC;

	return VB2_SUCCESS;
}

void vb2_nv_init(struct vb2_context *ctx)
{
	struct vb2_shared_data *sd = vb2_get_sd(ctx);
	uint8_t *p = ctx->nvdata;

	/* Check data for consistency */
	if (vb2_nv_check_crc(ctx) != VB2_SUCCESS) {
		/* Data is inconsistent (bad CRC or header); reset defaults */
		memset(p, 0, VB2_NVDATA_SIZE);
		p[VB2_NV_OFFS_HEADER] = (VB2_NV_HEADER_SIGNATURE |
					 VB2_NV_HEADER_FW_SETTINGS_RESET |
					 VB2_NV_HEADER_KERNEL_SETTINGS_RESET);

		/* Regenerate CRC */
		vb2_nv_regen_crc(ctx);

		/* Set status flag */
		sd->status |= VB2_SD_STATUS_NV_REINIT;
		// TODO: unit test for status flag being set
	}

	sd->status |= VB2_SD_STATUS_NV_INIT;
}

/* Macro for vb2_nv_get() single-bit settings to reduce duplicate code. */
#define GETBIT(offs, mask) (p[offs] & mask ? 1 : 0)

uint32_t vb2_nv_get(struct vb2_context *ctx, enum vb2_nv_param param)
{
	const uint8_t *p = ctx->nvdata;

	/*
	 * TODO: We could reduce the binary size for this code by #ifdef'ing
	 * out the params not used by firmware verification.
	 */
	switch (param) {
	case VB2_NV_FIRMWARE_SETTINGS_RESET:
		return GETBIT(VB2_NV_OFFS_HEADER,
			      VB2_NV_HEADER_FW_SETTINGS_RESET);

	case VB2_NV_KERNEL_SETTINGS_RESET:
		return GETBIT(VB2_NV_OFFS_HEADER,
			      VB2_NV_HEADER_KERNEL_SETTINGS_RESET);

	case VB2_NV_DEBUG_RESET_MODE:
		return GETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_DEBUG_RESET);

	case VB2_NV_TRY_NEXT:
		return GETBIT(VB2_NV_OFFS_BOOT2, VB2_NV_BOOT2_TRY_NEXT);

	case VB2_NV_TRY_COUNT:
		return p[VB2_NV_OFFS_BOOT] & VB2_NV_BOOT_TRY_COUNT_MASK;

	case VB2_NV_FW_TRIED:
		return GETBIT(VB2_NV_OFFS_BOOT2, VB2_NV_BOOT2_TRIED);

	case VB2_NV_FW_RESULT:
		return p[VB2_NV_OFFS_BOOT2] & VB2_NV_BOOT2_RESULT_MASK;

	case VB2_NV_RECOVERY_REQUEST:
		return p[VB2_NV_OFFS_RECOVERY];

	case VB2_NV_RECOVERY_SUBCODE:
		return p[VB2_NV_OFFS_RECOVERY_SUBCODE];

	case VB2_NV_LOCALIZATION_INDEX:
		return p[VB2_NV_OFFS_LOCALIZATION];

	case VB2_NV_KERNEL_FIELD:
		return (p[VB2_NV_OFFS_KERNEL]
			| (p[VB2_NV_OFFS_KERNEL + 1] << 8)
			| (p[VB2_NV_OFFS_KERNEL + 2] << 16)
			| (p[VB2_NV_OFFS_KERNEL + 3] << 24));

	case VB2_NV_DEV_BOOT_USB:
		return GETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_USB);

	case VB2_NV_DEV_BOOT_LEGACY:
		return GETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_LEGACY);

	case VB2_NV_DEV_BOOT_SIGNED_ONLY:
		return GETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_SIGNED_ONLY);

	case VB2_NV_DISABLE_DEV_REQUEST:
		return GETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_DISABLE_DEV);

	case VB2_NV_OPROM_NEEDED:
		return GETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_OPROM_NEEDED);

	case VB2_NV_BACKUP_NVRAM_REQUEST:
		return GETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_BACKUP_NVRAM);

	case VB2_NV_CLEAR_TPM_OWNER_REQUEST:
		return GETBIT(VB2_NV_OFFS_TPM, VB2_NV_TPM_CLEAR_OWNER_REQUEST);

	case VB2_NV_CLEAR_TPM_OWNER_DONE:
		return GETBIT(VB2_NV_OFFS_TPM, VB2_NV_TPM_CLEAR_OWNER_DONE);
	}

	/*
	 * Put default return outside the switch() instead of in default:, so
	 * that adding a new param will cause a compiler warning.
	 */
	return 0;
}

#undef GETBIT

/* Macro for vb2_nv_set() single-bit settings to reduce duplicate code. */
#define SETBIT(offs, mask)					\
	{ if (value) p[offs] |= mask; else p[offs] &= ~mask; }

void vb2_nv_set(struct vb2_context *ctx,
		enum vb2_nv_param param,
		uint32_t value)
{
	uint8_t *p = ctx->nvdata;

	/* If not changing the value, don't regenerate the CRC. */
	if (vb2_nv_get(ctx, param) == value)
		return;

	/*
	 * TODO: We could reduce the binary size for this code by #ifdef'ing
	 * out the params not used by firmware verification.
	 */
	switch (param) {
	case VB2_NV_FIRMWARE_SETTINGS_RESET:
		SETBIT(VB2_NV_OFFS_HEADER, VB2_NV_HEADER_FW_SETTINGS_RESET);
		break;

	case VB2_NV_KERNEL_SETTINGS_RESET:
		SETBIT(VB2_NV_OFFS_HEADER, VB2_NV_HEADER_KERNEL_SETTINGS_RESET);
		break;

	case VB2_NV_DEBUG_RESET_MODE:
		SETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_DEBUG_RESET);
		break;

	case VB2_NV_TRY_NEXT:
		SETBIT(VB2_NV_OFFS_BOOT2, VB2_NV_BOOT2_TRY_NEXT);
		break;

	case VB2_NV_TRY_COUNT:
		/* Clip to valid range. */
		if (value > VB2_NV_BOOT_TRY_COUNT_MASK)
			value = VB2_NV_BOOT_TRY_COUNT_MASK;

		p[VB2_NV_OFFS_BOOT] &= ~VB2_NV_BOOT_TRY_COUNT_MASK;
		p[VB2_NV_OFFS_BOOT] |= (uint8_t)value;
		break;

	case VB2_NV_FW_TRIED:
		SETBIT(VB2_NV_OFFS_BOOT2, VB2_NV_BOOT2_TRIED);
		break;

	case VB2_NV_FW_RESULT:
		/* Map out of range values to unknown */
		if (value > VB2_NV_BOOT2_RESULT_MASK)
			value = VB2_FW_RESULT_UNKNOWN;

		p[VB2_NV_OFFS_BOOT2] &= ~VB2_NV_BOOT2_RESULT_MASK;
		p[VB2_NV_OFFS_BOOT2] |= (uint8_t)value;
		break;

	case VB2_NV_RECOVERY_REQUEST:
		/*
		 * Map values outside the valid range to the legacy reason,
		 * since we can't determine if we're called from kernel or user
		 * mode.
		 */
		if (value > 0xff)
			value = VB2_RECOVERY_LEGACY;
		p[VB2_NV_OFFS_RECOVERY] = (uint8_t)value;
		break;

	case VB2_NV_RECOVERY_SUBCODE:
		p[VB2_NV_OFFS_RECOVERY_SUBCODE] = (uint8_t)value;
		break;

	case VB2_NV_LOCALIZATION_INDEX:
		/* Map values outside the valid range to the default index. */
		if (value > 0xFF)
			value = 0;
		p[VB2_NV_OFFS_LOCALIZATION] = (uint8_t)value;
		break;

	case VB2_NV_KERNEL_FIELD:
		p[VB2_NV_OFFS_KERNEL] = (uint8_t)(value);
		p[VB2_NV_OFFS_KERNEL + 1] = (uint8_t)(value >> 8);
		p[VB2_NV_OFFS_KERNEL + 2] = (uint8_t)(value >> 16);
		p[VB2_NV_OFFS_KERNEL + 3] = (uint8_t)(value >> 24);
		break;

	case VB2_NV_DEV_BOOT_USB:
		SETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_USB);
		break;

	case VB2_NV_DEV_BOOT_LEGACY:
		SETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_LEGACY);
		break;

	case VB2_NV_DEV_BOOT_SIGNED_ONLY:
		SETBIT(VB2_NV_OFFS_DEV, VB2_NV_DEV_FLAG_SIGNED_ONLY);
		break;

	case VB2_NV_DISABLE_DEV_REQUEST:
		SETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_DISABLE_DEV);
		break;

	case VB2_NV_OPROM_NEEDED:
		SETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_OPROM_NEEDED);
		break;

	case VB2_NV_BACKUP_NVRAM_REQUEST:
		SETBIT(VB2_NV_OFFS_BOOT, VB2_NV_BOOT_BACKUP_NVRAM);
		break;

	case VB2_NV_CLEAR_TPM_OWNER_REQUEST:
		SETBIT(VB2_NV_OFFS_TPM, VB2_NV_TPM_CLEAR_OWNER_REQUEST);
		break;

	case VB2_NV_CLEAR_TPM_OWNER_DONE:
		SETBIT(VB2_NV_OFFS_TPM, VB2_NV_TPM_CLEAR_OWNER_DONE);
		break;
	}

	/*
	 * Note there is no default case.  This causes a compiler warning if
	 * a new param is added to the enum without adding support here.
	 */

	/* Need to regenerate CRC, since the value changed. */
	vb2_nv_regen_crc(ctx);
}

#undef SETBIT