| /* Copyright (c) 2014 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| * |
| * Tests for api.c |
| */ |
| |
| #include <stdio.h> |
| |
| #include "2api.h" |
| #include "2common.h" |
| #include "2misc.h" |
| #include "2nvstorage.h" |
| #include "2rsa.h" |
| #include "2secdata.h" |
| #include "2sysincludes.h" |
| #include "test_common.h" |
| #include "vb2_common.h" |
| |
| /* Common context for tests */ |
| |
| static uint8_t workbuf[VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE] |
| __attribute__((aligned(VB2_WORKBUF_ALIGN))); |
| static struct vb2_context *ctx; |
| static struct vb2_shared_data *sd; |
| static struct vb2_gbb_header gbb; |
| |
| const char mock_body[320] = "Mock body"; |
| const int mock_body_size = sizeof(mock_body); |
| const int mock_algorithm = VB2_ALG_RSA2048_SHA256; |
| const int mock_hash_alg = VB2_HASH_SHA256; |
| static const uint8_t mock_hwid_digest[VB2_GBB_HWID_DIGEST_SIZE] = { |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, |
| 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, |
| 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, |
| 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, |
| }; |
| const int mock_sig_size = 64; |
| static uint8_t digest_result[VB2_SHA256_DIGEST_SIZE]; |
| static const uint32_t digest_result_size = sizeof(digest_result); |
| |
| /* Mocked function data */ |
| |
| static enum { |
| HWCRYPTO_DISABLED, |
| HWCRYPTO_ENABLED, |
| HWCRYPTO_FORBIDDEN, |
| } hwcrypto_state; |
| |
| static int force_dev_mode; |
| static vb2_error_t retval_vb2_fw_init_gbb; |
| static vb2_error_t retval_vb2_check_dev_switch; |
| static vb2_error_t retval_vb2_check_tpm_clear; |
| static vb2_error_t retval_vb2_select_fw_slot; |
| static vb2_error_t retval_vb2_load_fw_keyblock; |
| static vb2_error_t retval_vb2_load_fw_preamble; |
| static vb2_error_t retval_vb2_digest_finalize; |
| static vb2_error_t retval_vb2_verify_digest; |
| |
| /* Type of test to reset for */ |
| |
| enum reset_type { |
| FOR_MISC, |
| FOR_EXTEND_HASH, |
| FOR_CHECK_HASH, |
| }; |
| |
| static void reset_common_data(enum reset_type t) |
| { |
| struct vb2_fw_preamble *pre; |
| struct vb2_packed_key *k; |
| |
| memset(workbuf, 0xaa, sizeof(workbuf)); |
| |
| TEST_SUCC(vb2api_init(workbuf, sizeof(workbuf), &ctx), |
| "vb2api_init failed"); |
| sd = vb2_get_sd(ctx); |
| |
| vb2_nv_init(ctx); |
| |
| vb2api_secdata_firmware_create(ctx); |
| |
| vb2api_secdata_kernel_create(ctx); |
| vb2_secdata_kernel_init(ctx); |
| |
| force_dev_mode = 0; |
| retval_vb2_fw_init_gbb = VB2_SUCCESS; |
| retval_vb2_check_dev_switch = VB2_SUCCESS; |
| retval_vb2_check_tpm_clear = VB2_SUCCESS; |
| retval_vb2_select_fw_slot = VB2_SUCCESS; |
| retval_vb2_load_fw_keyblock = VB2_SUCCESS; |
| retval_vb2_load_fw_preamble = VB2_SUCCESS; |
| retval_vb2_digest_finalize = VB2_SUCCESS; |
| retval_vb2_verify_digest = VB2_SUCCESS; |
| |
| memcpy(&gbb.hwid_digest, mock_hwid_digest, |
| sizeof(gbb.hwid_digest)); |
| |
| sd->preamble_offset = sd->workbuf_used; |
| sd->preamble_size = sizeof(*pre); |
| vb2_set_workbuf_used(ctx, sd->preamble_offset + sd->preamble_size); |
| pre = vb2_member_of(sd, sd->preamble_offset); |
| pre->body_signature.data_size = mock_body_size; |
| pre->body_signature.sig_size = mock_sig_size; |
| if (hwcrypto_state == HWCRYPTO_FORBIDDEN) |
| pre->flags = VB2_FIRMWARE_PREAMBLE_DISALLOW_HWCRYPTO; |
| else |
| pre->flags = 0; |
| |
| sd->data_key_offset = sd->workbuf_used; |
| sd->data_key_size = sizeof(*k) + 8; |
| vb2_set_workbuf_used(ctx, sd->data_key_offset + sd->data_key_size); |
| k = vb2_member_of(sd, sd->data_key_offset); |
| k->algorithm = mock_algorithm; |
| |
| if (t == FOR_EXTEND_HASH || t == FOR_CHECK_HASH) |
| vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY); |
| |
| if (t == FOR_CHECK_HASH) |
| vb2api_extend_hash(ctx, mock_body, mock_body_size); |
| |
| /* Always clear out the digest result. */ |
| memset(digest_result, 0, digest_result_size); |
| }; |
| |
| /* Mocked functions */ |
| struct vb2_gbb_header *vb2_get_gbb(struct vb2_context *c) |
| { |
| return &gbb; |
| } |
| |
| vb2_error_t vb2_fw_init_gbb(struct vb2_context *c) |
| { |
| return retval_vb2_fw_init_gbb; |
| } |
| |
| vb2_error_t vb2_check_dev_switch(struct vb2_context *c) |
| { |
| if (force_dev_mode) |
| sd->flags |= VB2_SD_FLAG_DEV_MODE_ENABLED; |
| return retval_vb2_check_dev_switch; |
| } |
| |
| vb2_error_t vb2_check_tpm_clear(struct vb2_context *c) |
| { |
| return retval_vb2_check_tpm_clear; |
| } |
| |
| vb2_error_t vb2_select_fw_slot(struct vb2_context *c) |
| { |
| return retval_vb2_select_fw_slot; |
| } |
| |
| vb2_error_t vb2_load_fw_keyblock(struct vb2_context *c) |
| { |
| return retval_vb2_load_fw_keyblock; |
| } |
| |
| vb2_error_t vb2_load_fw_preamble(struct vb2_context *c) |
| { |
| return retval_vb2_load_fw_preamble; |
| } |
| |
| vb2_error_t vb2_unpack_key_buffer(struct vb2_public_key *key, |
| const uint8_t *buf, uint32_t size) |
| { |
| struct vb2_packed_key *k = (struct vb2_packed_key *)buf; |
| |
| if (size != sizeof(*k) + 8) |
| return VB2_ERROR_UNPACK_KEY_SIZE; |
| |
| key->sig_alg = vb2_crypto_to_signature(k->algorithm); |
| key->hash_alg = vb2_crypto_to_hash(k->algorithm); |
| |
| return VB2_SUCCESS; |
| } |
| |
| vb2_error_t vb2ex_hwcrypto_digest_init(enum vb2_hash_algorithm hash_alg, |
| uint32_t data_size) |
| { |
| switch (hwcrypto_state) { |
| case HWCRYPTO_DISABLED: |
| return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED; |
| case HWCRYPTO_ENABLED: |
| if (hash_alg != mock_hash_alg) |
| return VB2_ERROR_SHA_INIT_ALGORITHM; |
| else |
| return VB2_SUCCESS; |
| case HWCRYPTO_FORBIDDEN: |
| default: |
| return VB2_ERROR_UNKNOWN; |
| } |
| } |
| |
| vb2_error_t vb2ex_hwcrypto_digest_extend(const uint8_t *buf, |
| uint32_t size) |
| { |
| if (hwcrypto_state != HWCRYPTO_ENABLED) |
| return VB2_ERROR_UNKNOWN; |
| |
| return VB2_SUCCESS; |
| } |
| |
| static void fill_digest(uint8_t *digest, uint32_t digest_size) |
| { |
| /* Set the result to a known value. */ |
| memset(digest, 0x0a, digest_size); |
| } |
| |
| vb2_error_t vb2ex_hwcrypto_digest_finalize(uint8_t *digest, |
| uint32_t digest_size) |
| { |
| if (hwcrypto_state != HWCRYPTO_ENABLED) |
| return VB2_ERROR_UNKNOWN; |
| |
| if (retval_vb2_digest_finalize == VB2_SUCCESS) |
| fill_digest(digest, digest_size); |
| |
| return retval_vb2_digest_finalize; |
| } |
| |
| vb2_error_t vb2_digest_init(struct vb2_digest_context *dc, |
| enum vb2_hash_algorithm hash_alg) |
| { |
| if (hwcrypto_state == HWCRYPTO_ENABLED) |
| return VB2_ERROR_UNKNOWN; |
| if (hash_alg != mock_hash_alg) |
| return VB2_ERROR_SHA_INIT_ALGORITHM; |
| |
| dc->hash_alg = hash_alg; |
| dc->using_hwcrypto = 0; |
| |
| return VB2_SUCCESS; |
| } |
| |
| vb2_error_t vb2_digest_extend(struct vb2_digest_context *dc, const uint8_t *buf, |
| uint32_t size) |
| { |
| if (hwcrypto_state == HWCRYPTO_ENABLED) |
| return VB2_ERROR_UNKNOWN; |
| if (dc->hash_alg != mock_hash_alg) |
| return VB2_ERROR_SHA_EXTEND_ALGORITHM; |
| |
| return VB2_SUCCESS; |
| } |
| |
| vb2_error_t vb2_digest_finalize(struct vb2_digest_context *dc, uint8_t *digest, |
| uint32_t digest_size) |
| { |
| if (hwcrypto_state == HWCRYPTO_ENABLED) |
| return VB2_ERROR_UNKNOWN; |
| |
| if (retval_vb2_digest_finalize == VB2_SUCCESS) |
| fill_digest(digest, digest_size); |
| |
| return retval_vb2_digest_finalize; |
| } |
| |
| uint32_t vb2_rsa_sig_size(enum vb2_signature_algorithm sig_alg) |
| { |
| return mock_sig_size; |
| } |
| |
| static struct vb2_public_key last_used_key; |
| |
| vb2_error_t vb2_rsa_verify_digest(const struct vb2_public_key *key, |
| uint8_t *sig, const uint8_t *digest, |
| const struct vb2_workbuf *wb) |
| { |
| memcpy(&last_used_key, key, sizeof(struct vb2_public_key)); |
| return retval_vb2_verify_digest; |
| } |
| |
| /* Tests */ |
| static int vb2_try_returned; |
| |
| static vb2_error_t call_vb2_try(vb2_error_t expr, uint8_t recovery_reason, |
| int one_arg) |
| { |
| vb2_try_returned = 1; |
| if (one_arg) |
| VB2_TRY(expr); |
| else |
| VB2_TRY(expr, ctx, recovery_reason); |
| vb2_try_returned = 0; |
| return VB2_SUCCESS; |
| } |
| |
| static void misc_tests(void) |
| { |
| /* Test secdata_firmware passthru functions */ |
| reset_common_data(FOR_MISC); |
| /* Corrupt secdata_firmware so initial check will fail */ |
| ctx->secdata_firmware[0] ^= 0x42; |
| TEST_EQ(vb2api_secdata_firmware_check(ctx), |
| VB2_ERROR_SECDATA_FIRMWARE_CRC, |
| "secdata_firmware check"); |
| TEST_EQ(vb2api_secdata_firmware_create(ctx), VB2_SECDATA_FIRMWARE_SIZE, |
| "secdata_firmware create"); |
| TEST_SUCC(vb2api_secdata_firmware_check(ctx), |
| "secdata_firmware check 2"); |
| |
| /* Test fail passthru */ |
| reset_common_data(FOR_MISC); |
| vb2api_fail(ctx, 12, 34); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| 12, "vb2api_fail request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_SUBCODE), |
| 34, "vb2api_fail subcode"); |
| |
| /* Test get_firmware_size() */ |
| reset_common_data(FOR_MISC); |
| TEST_EQ(vb2api_get_firmware_size(ctx), mock_body_size, "firmware_size"); |
| |
| reset_common_data(FOR_MISC); |
| sd->preamble_size = 0; |
| TEST_EQ(vb2api_get_firmware_size(ctx), 0, "firmware_size too early"); |
| |
| /* Test VB2_TRY() */ |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_SUCCESS, VB2_RECOVERY_NOT_REQUESTED, 1); |
| TEST_EQ(vb2_try_returned, 0, "VB2_TRY(expr) success"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_NOT_REQUESTED, " vb2api_fail no request"); |
| |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_REQUEST, VB2_RECOVERY_NOT_REQUESTED, 1); |
| TEST_EQ(vb2_try_returned, 1, "VB2_TRY(expr) request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_NOT_REQUESTED, " vb2api_fail no request"); |
| |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_ERROR_MOCK, VB2_RECOVERY_NOT_REQUESTED, 1); |
| TEST_EQ(vb2_try_returned, 1, "VB2_TRY(expr) error"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_NOT_REQUESTED, " vb2api_fail no request"); |
| |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_SUCCESS, 123, 0); |
| TEST_EQ(vb2_try_returned, 0, "VB2_TRY(expr, ...) success"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_NOT_REQUESTED, " vb2api_fail no request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_SUBCODE), |
| 0, " vb2api_fail no subcode"); |
| |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_REQUEST, 123, 0); |
| TEST_EQ(vb2_try_returned, 1, "VB2_TRY(expr, ...) request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_NOT_REQUESTED, " vb2api_fail no request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_SUBCODE), |
| 0, " vb2api_fail no subcode"); |
| |
| reset_common_data(FOR_MISC); |
| call_vb2_try(VB2_ERROR_MOCK, 123, 0); |
| TEST_EQ(vb2_try_returned, 1, "VB2_TRY(expr, ...) error"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| 123, " vb2api_fail request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_SUBCODE), |
| VB2_ERROR_MOCK & 0xff, " vb2api_fail subcode"); |
| } |
| |
| static void phase1_tests(void) |
| { |
| reset_common_data(FOR_MISC); |
| TEST_SUCC(vb2api_fw_phase1(ctx), "phase1 good"); |
| TEST_EQ(sd->recovery_reason, 0, " not recovery"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_RECOVERY_MODE, 0, " recovery flag"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_DISPLAY_INIT, |
| 0, " display init context flag"); |
| TEST_EQ(sd->flags & VB2_SD_FLAG_DISPLAY_AVAILABLE, |
| 0, " display available SD flag"); |
| TEST_NEQ(sd->status & VB2_SD_STATUS_SECDATA_FIRMWARE_INIT, |
| 0, " secdata firmware initialized"); |
| TEST_NEQ(sd->status & VB2_SD_STATUS_SECDATA_KERNEL_INIT, |
| 0, " secdata kernel initialized"); |
| |
| reset_common_data(FOR_MISC); |
| retval_vb2_fw_init_gbb = VB2_ERROR_GBB_MAGIC; |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 gbb"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_GBB_HEADER, |
| " recovery reason"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_RECOVERY_MODE, 0, " recovery flag"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| |
| /* Dev switch error in normal mode reboots to recovery */ |
| reset_common_data(FOR_MISC); |
| retval_vb2_check_dev_switch = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_MOCK, "phase1 dev switch"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_DEV_SWITCH, " recovery request"); |
| |
| /* Dev switch error already in recovery mode just proceeds */ |
| reset_common_data(FOR_MISC); |
| vb2_nv_set(ctx, VB2_NV_RECOVERY_REQUEST, VB2_RECOVERY_RO_UNSPECIFIED); |
| retval_vb2_check_dev_switch = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 dev switch error in recovery"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_RO_UNSPECIFIED, |
| " recovery reason"); |
| /* Check that DISPLAY_AVAILABLE gets set on recovery mode. */ |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_DISPLAY_INIT, |
| 0, " display init context flag"); |
| TEST_NEQ(sd->flags & VB2_SD_FLAG_DISPLAY_AVAILABLE, |
| 0, " display available SD flag"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->secdata_firmware[0] ^= 0x42; |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 secdata_firmware"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_SECDATA_FIRMWARE_INIT, |
| " recovery reason"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_RECOVERY_MODE, 0, " recovery flag"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| |
| /* Bad secdata_kernel causes recovery mode */ |
| reset_common_data(FOR_MISC); |
| ctx->secdata_kernel[2] ^= 0x42; /* 3rd byte is CRC */ |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 bad secdata_kernel"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_SECDATA_KERNEL_INIT, |
| " recovery reason"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_RECOVERY_MODE, 0, " recovery flag"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| |
| /* Test secdata_firmware-requested reboot */ |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_SECDATA_WANTS_REBOOT; |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_SECDATA_REBOOT, |
| "phase1 secdata_firmware reboot normal"); |
| TEST_EQ(sd->recovery_reason, 0, " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 1, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| 0, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| vb2_nv_set(ctx, VB2_NV_TPM_REQUESTED_REBOOT, 1); |
| TEST_SUCC(vb2api_fw_phase1(ctx), |
| "phase1 secdata_firmware reboot back normal"); |
| TEST_EQ(sd->recovery_reason, 0, " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 0, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| 0, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_SECDATA_WANTS_REBOOT; |
| memset(ctx->secdata_firmware, 0, sizeof(ctx->secdata_firmware)); |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_SECDATA_REBOOT, |
| "phase1 secdata_firmware reboot normal, " |
| "secdata_firmware blank"); |
| TEST_EQ(sd->recovery_reason, 0, " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 1, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| 0, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_SECDATA_WANTS_REBOOT; |
| vb2_nv_set(ctx, VB2_NV_TPM_REQUESTED_REBOOT, 1); |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 secdata_firmware reboot normal again"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_RO_TPM_REBOOT, |
| " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 1, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_TPM_REBOOT, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_SECDATA_WANTS_REBOOT; |
| vb2_nv_set(ctx, VB2_NV_RECOVERY_REQUEST, VB2_RECOVERY_RO_UNSPECIFIED); |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_SECDATA_REBOOT, |
| "phase1 secdata_firmware reboot recovery"); |
| /* Recovery reason isn't set this boot because we're rebooting first */ |
| TEST_EQ(sd->recovery_reason, 0, " recovery reason not set THIS boot"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 1, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_UNSPECIFIED, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| vb2_nv_set(ctx, VB2_NV_TPM_REQUESTED_REBOOT, 1); |
| vb2_nv_set(ctx, VB2_NV_RECOVERY_REQUEST, VB2_RECOVERY_RO_UNSPECIFIED); |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 secdata_firmware reboot back recovery"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_RO_UNSPECIFIED, |
| " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 0, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_UNSPECIFIED, " recovery request"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_SECDATA_WANTS_REBOOT; |
| vb2_nv_set(ctx, VB2_NV_TPM_REQUESTED_REBOOT, 1); |
| vb2_nv_set(ctx, VB2_NV_RECOVERY_REQUEST, VB2_RECOVERY_RO_UNSPECIFIED); |
| TEST_EQ(vb2api_fw_phase1(ctx), VB2_ERROR_API_PHASE1_RECOVERY, |
| "phase1 secdata_firmware reboot recovery again"); |
| TEST_EQ(sd->recovery_reason, VB2_RECOVERY_RO_UNSPECIFIED, |
| " recovery reason"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_TPM_REQUESTED_REBOOT), |
| 1, " tpm reboot request"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_UNSPECIFIED, " recovery request"); |
| |
| /* Cases for checking DISPLAY_INIT and DISPLAY_AVAILABLE. */ |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_DISPLAY_INIT; |
| TEST_SUCC(vb2api_fw_phase1(ctx), "phase1 with DISPLAY_INIT"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_DISPLAY_INIT, |
| 0, " display init context flag"); |
| TEST_NEQ(sd->flags & VB2_SD_FLAG_DISPLAY_AVAILABLE, |
| 0, " display available SD flag"); |
| |
| reset_common_data(FOR_MISC); |
| vb2_nv_set(ctx, VB2_NV_DISPLAY_REQUEST, 1); |
| TEST_SUCC(vb2api_fw_phase1(ctx), "phase1 with DISPLAY_REQUEST"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_DISPLAY_INIT, |
| 0, " display init context flag"); |
| TEST_NEQ(sd->flags & VB2_SD_FLAG_DISPLAY_AVAILABLE, |
| 0, " display available SD flag"); |
| |
| reset_common_data(FOR_MISC); |
| force_dev_mode = 1; |
| TEST_SUCC(vb2api_fw_phase1(ctx), "phase1 in dev mode"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_DISPLAY_INIT, |
| 0, " display init context flag"); |
| TEST_NEQ(sd->flags & VB2_SD_FLAG_DISPLAY_AVAILABLE, |
| 0, " display available SD flag"); |
| } |
| |
| static void phase2_tests(void) |
| { |
| reset_common_data(FOR_MISC); |
| TEST_SUCC(vb2api_fw_phase2(ctx), "phase2 good"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_FW_SLOT_B, 0, " slot b flag"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_DEVELOPER_MODE; |
| TEST_SUCC(vb2api_fw_phase2(ctx), "phase2 dev"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| |
| reset_common_data(FOR_MISC); |
| retval_vb2_check_tpm_clear = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase2(ctx), VB2_ERROR_MOCK, "phase2 tpm clear"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_TPM_CLEAR_OWNER, " recovery reason"); |
| |
| reset_common_data(FOR_MISC); |
| retval_vb2_select_fw_slot = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase2(ctx), VB2_ERROR_MOCK, "phase2 slot"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_FW_SLOT, " recovery reason"); |
| |
| /* S3 resume exits before clearing RAM */ |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_S3_RESUME; |
| ctx->flags |= VB2_CONTEXT_DEVELOPER_MODE; |
| TEST_SUCC(vb2api_fw_phase2(ctx), "phase2 s3 dev"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_CLEAR_RAM, 0, " clear ram flag"); |
| TEST_EQ(ctx->flags & VB2_CONTEXT_FW_SLOT_B, 0, " slot b flag"); |
| |
| reset_common_data(FOR_MISC); |
| ctx->flags |= VB2_CONTEXT_S3_RESUME; |
| vb2_nv_set(ctx, VB2_NV_FW_TRIED, 1); |
| TEST_SUCC(vb2api_fw_phase2(ctx), "phase2 s3"); |
| TEST_NEQ(ctx->flags & VB2_CONTEXT_FW_SLOT_B, 0, " slot b flag"); |
| } |
| |
| static void get_pcr_digest_tests(void) |
| { |
| uint8_t digest[VB2_PCR_DIGEST_RECOMMENDED_SIZE]; |
| uint8_t digest_org[VB2_PCR_DIGEST_RECOMMENDED_SIZE]; |
| uint32_t digest_size; |
| |
| reset_common_data(FOR_MISC); |
| memset(digest_org, 0, sizeof(digest_org)); |
| |
| digest_size = sizeof(digest); |
| memset(digest, 0, sizeof(digest)); |
| TEST_SUCC(vb2api_get_pcr_digest( |
| ctx, BOOT_MODE_PCR, digest, &digest_size), |
| "BOOT_MODE_PCR"); |
| TEST_EQ(digest_size, VB2_SHA1_DIGEST_SIZE, "BOOT_MODE_PCR digest size"); |
| TEST_TRUE(memcmp(digest, digest_org, digest_size), |
| "BOOT_MODE_PCR digest"); |
| |
| digest_size = sizeof(digest); |
| memset(digest, 0, sizeof(digest)); |
| TEST_SUCC(vb2api_get_pcr_digest( |
| ctx, HWID_DIGEST_PCR, digest, &digest_size), |
| "HWID_DIGEST_PCR"); |
| TEST_EQ(digest_size, VB2_GBB_HWID_DIGEST_SIZE, |
| "HWID_DIGEST_PCR digest size"); |
| TEST_FALSE(memcmp(digest, mock_hwid_digest, digest_size), |
| "HWID_DIGEST_PCR digest"); |
| |
| digest_size = 1; |
| TEST_EQ(vb2api_get_pcr_digest(ctx, BOOT_MODE_PCR, digest, &digest_size), |
| VB2_ERROR_API_PCR_DIGEST_BUF, |
| "BOOT_MODE_PCR buffer too small"); |
| |
| TEST_EQ(vb2api_get_pcr_digest( |
| ctx, HWID_DIGEST_PCR + 1, digest, &digest_size), |
| VB2_ERROR_API_PCR_DIGEST, |
| "invalid enum vb2_pcr_digest"); |
| } |
| |
| static void phase3_tests(void) |
| { |
| reset_common_data(FOR_MISC); |
| TEST_SUCC(vb2api_fw_phase3(ctx), "phase3 good"); |
| |
| reset_common_data(FOR_MISC); |
| retval_vb2_load_fw_keyblock = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase3(ctx), VB2_ERROR_MOCK, "phase3 keyblock"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_INVALID_RW, " recovery reason"); |
| |
| reset_common_data(FOR_MISC); |
| retval_vb2_load_fw_preamble = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_fw_phase3(ctx), VB2_ERROR_MOCK, "phase3 keyblock"); |
| TEST_EQ(vb2_nv_get(ctx, VB2_NV_RECOVERY_REQUEST), |
| VB2_RECOVERY_RO_INVALID_RW, " recovery reason"); |
| } |
| |
| static void init_hash_tests(void) |
| { |
| struct vb2_packed_key *k; |
| int wb_used_before; |
| |
| /* For now, all we support is body signature hash */ |
| reset_common_data(FOR_MISC); |
| wb_used_before = sd->workbuf_used; |
| TEST_SUCC(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| "init hash good"); |
| TEST_EQ(sd->hash_offset, wb_used_before, "hash context offset"); |
| TEST_EQ(sd->hash_size, sizeof(struct vb2_digest_context), |
| "hash context size"); |
| TEST_EQ(sd->workbuf_used, |
| vb2_wb_round_up(sd->hash_offset + sd->hash_size), |
| "hash uses workbuf"); |
| TEST_EQ(sd->hash_tag, VB2_HASH_TAG_FW_BODY, "hash tag"); |
| TEST_EQ(sd->hash_remaining_size, mock_body_size, "hash remaining"); |
| |
| wb_used_before = sd->workbuf_used; |
| TEST_SUCC(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| "init hash again"); |
| TEST_EQ(sd->workbuf_used, wb_used_before, "init hash reuses context"); |
| |
| reset_common_data(FOR_MISC); |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_INVALID), |
| VB2_ERROR_API_INIT_HASH_TAG, "init hash invalid tag"); |
| |
| reset_common_data(FOR_MISC); |
| sd->preamble_size = 0; |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| VB2_ERROR_API_INIT_HASH_PREAMBLE, "init hash preamble"); |
| |
| reset_common_data(FOR_MISC); |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY + 1), |
| VB2_ERROR_API_INIT_HASH_TAG, "init hash unknown tag"); |
| |
| reset_common_data(FOR_MISC); |
| sd->workbuf_used = sd->workbuf_size + VB2_WORKBUF_ALIGN - |
| vb2_wb_round_up(sizeof(struct vb2_digest_context)); |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| VB2_ERROR_API_INIT_HASH_WORKBUF, "init hash workbuf"); |
| |
| reset_common_data(FOR_MISC); |
| sd->data_key_size = 0; |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| VB2_ERROR_API_INIT_HASH_DATA_KEY, "init hash data key"); |
| |
| reset_common_data(FOR_MISC); |
| sd->data_key_size--; |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| VB2_ERROR_UNPACK_KEY_SIZE, "init hash data key size"); |
| |
| reset_common_data(FOR_MISC); |
| k = vb2_member_of(sd, sd->data_key_offset); |
| k->algorithm--; |
| TEST_EQ(vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY), |
| VB2_ERROR_SHA_INIT_ALGORITHM, "init hash algorithm"); |
| } |
| |
| static void extend_hash_tests(void) |
| { |
| struct vb2_digest_context *dc; |
| |
| reset_common_data(FOR_EXTEND_HASH); |
| TEST_SUCC(vb2api_extend_hash(ctx, mock_body, 32), |
| "hash extend good"); |
| TEST_EQ(sd->hash_remaining_size, mock_body_size - 32, |
| "hash extend remaining"); |
| TEST_SUCC(vb2api_extend_hash(ctx, mock_body, mock_body_size - 32), |
| "hash extend again"); |
| TEST_EQ(sd->hash_remaining_size, 0, "hash extend remaining 2"); |
| |
| reset_common_data(FOR_EXTEND_HASH); |
| sd->hash_size = 0; |
| TEST_EQ(vb2api_extend_hash(ctx, mock_body, mock_body_size), |
| VB2_ERROR_API_EXTEND_HASH_WORKBUF, "hash extend no workbuf"); |
| |
| reset_common_data(FOR_EXTEND_HASH); |
| TEST_EQ(vb2api_extend_hash(ctx, mock_body, mock_body_size + 1), |
| VB2_ERROR_API_EXTEND_HASH_SIZE, "hash extend too much"); |
| |
| reset_common_data(FOR_EXTEND_HASH); |
| TEST_EQ(vb2api_extend_hash(ctx, mock_body, 0), |
| VB2_ERROR_API_EXTEND_HASH_SIZE, "hash extend empty"); |
| |
| if (hwcrypto_state != HWCRYPTO_ENABLED) { |
| reset_common_data(FOR_EXTEND_HASH); |
| dc = (struct vb2_digest_context *) |
| vb2_member_of(sd, sd->hash_offset); |
| dc->hash_alg = mock_hash_alg + 1; |
| TEST_EQ(vb2api_extend_hash(ctx, mock_body, mock_body_size), |
| VB2_ERROR_SHA_EXTEND_ALGORITHM, "hash extend fail"); |
| } |
| } |
| |
| static void check_hash_tests(void) |
| { |
| struct vb2_fw_preamble *pre; |
| const uint32_t digest_value = 0x0a0a0a0a; |
| |
| reset_common_data(FOR_CHECK_HASH); |
| TEST_SUCC(vb2api_check_hash(ctx), "check hash good"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| TEST_SUCC(vb2api_check_hash_get_digest(ctx, digest_result, |
| digest_result_size), "check hash good with result"); |
| /* Check the first 4 bytes to ensure it was copied over. */ |
| TEST_SUCC(memcmp(digest_result, &digest_value, sizeof(digest_value)), |
| "check digest value"); |
| |
| /* Test hwcrypto conditions */ |
| reset_common_data(FOR_CHECK_HASH); |
| TEST_SUCC(vb2api_check_hash(ctx), "check hash good"); |
| TEST_EQ(last_used_key.allow_hwcrypto, 0, |
| "hwcrypto is forbidden by TPM flag"); |
| |
| ctx->flags |= VB2_CONTEXT_RECOVERY_MODE; |
| TEST_SUCC(vb2api_check_hash(ctx), "check hash good"); |
| TEST_EQ(last_used_key.allow_hwcrypto, 0, |
| "hwcrypto is forbidden by TPM flag on recovery mode"); |
| |
| vb2_secdata_kernel_set(ctx, VB2_SECDATA_KERNEL_FLAGS, |
| VB2_SECDATA_KERNEL_FLAG_HWCRYPTO_ALLOWED); |
| |
| TEST_SUCC(vb2api_check_hash(ctx), "check hash good"); |
| TEST_EQ(last_used_key.allow_hwcrypto, 0, |
| "hwcrypto is forbidden on recovery mode"); |
| |
| ctx->flags &= ~VB2_CONTEXT_RECOVERY_MODE; |
| TEST_SUCC(vb2api_check_hash(ctx), "check hash good"); |
| TEST_EQ(last_used_key.allow_hwcrypto, 1, "hwcrypto is allowed"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| TEST_EQ(vb2api_check_hash_get_digest(ctx, digest_result, |
| digest_result_size - 1), |
| VB2_ERROR_API_CHECK_DIGEST_SIZE, "check digest size"); |
| TEST_NEQ(memcmp(digest_result, &digest_value, sizeof(digest_value)), 0, |
| "check digest wrong size"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->preamble_size = 0; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_PREAMBLE, "check hash preamble"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->hash_size = 0; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_WORKBUF, "check hash no workbuf"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->hash_remaining_size = 1; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_SIZE, "check hash size"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->workbuf_used = sd->workbuf_size; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_WORKBUF_DIGEST, "check hash workbuf"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| retval_vb2_digest_finalize = VB2_ERROR_MOCK; |
| TEST_EQ(vb2api_check_hash(ctx), VB2_ERROR_MOCK, "check hash finalize"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->hash_tag = VB2_HASH_TAG_INVALID; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_TAG, "check hash tag"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->data_key_size = 0; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_API_CHECK_HASH_DATA_KEY, "check hash data key"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| sd->data_key_size--; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_UNPACK_KEY_SIZE, "check hash data key size"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| pre = vb2_member_of(sd, sd->preamble_offset); |
| pre->body_signature.sig_size++; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_VDATA_SIG_SIZE, "check hash sig size"); |
| |
| reset_common_data(FOR_CHECK_HASH); |
| retval_vb2_digest_finalize = VB2_ERROR_RSA_VERIFY_DIGEST; |
| TEST_EQ(vb2api_check_hash(ctx), |
| VB2_ERROR_RSA_VERIFY_DIGEST, "check hash finalize"); |
| } |
| |
| int main(int argc, char* argv[]) |
| { |
| misc_tests(); |
| phase1_tests(); |
| phase2_tests(); |
| phase3_tests(); |
| |
| fprintf(stderr, "Running hash API tests without hwcrypto support...\n"); |
| hwcrypto_state = HWCRYPTO_DISABLED; |
| init_hash_tests(); |
| extend_hash_tests(); |
| check_hash_tests(); |
| |
| fprintf(stderr, "Running hash API tests with hwcrypto support...\n"); |
| hwcrypto_state = HWCRYPTO_ENABLED; |
| init_hash_tests(); |
| extend_hash_tests(); |
| check_hash_tests(); |
| |
| fprintf(stderr, "Running hash API tests with forbidden hwcrypto...\n"); |
| hwcrypto_state = HWCRYPTO_FORBIDDEN; |
| init_hash_tests(); |
| extend_hash_tests(); |
| check_hash_tests(); |
| |
| get_pcr_digest_tests(); |
| |
| return gTestSuccess ? 0 : 255; |
| } |