#!/bin/bash

# Copyright (c) 2010 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# Helper script that generates the legacy/efi bootloader partitions.
# It does not populate the templates, but can update a loop device.

# --- BEGIN COMMON.SH BOILERPLATE ---
# Load common CrOS utilities.  Inside the chroot this file is installed in
# /usr/lib/crosutils.  Outside the chroot we find it relative to the script's
# location.
find_common_sh() {
  local common_paths=(/usr/lib/crosutils $(dirname "$(readlink -f "$0")"))
  local path

  SCRIPT_ROOT=
  for path in "${common_paths[@]}"; do
    if [ -r "${path}/common.sh" ]; then
      SCRIPT_ROOT=${path}
      break
    fi
  done
}

find_common_sh
. "${SCRIPT_ROOT}/common.sh" || { echo "Unable to load common.sh"; exit 1; }
# --- END COMMON.SH BOILERPLATE ---

# Need to be inside the chroot to load chromeos-common.sh
assert_inside_chroot

# Load functions and constants for chromeos-install
. "/usr/lib/installer/chromeos-common.sh" || \
  die "Unable to load /usr/lib/installer/chromeos-common.sh"

get_default_board

# Flags.
DEFINE_string arch "x86" \
  "The boot architecture: arm or x86. (Default: x86)"
# TODO(wad) once extlinux is dead, we can remove this.
DEFINE_boolean install_syslinux ${FLAGS_FALSE} \
  "Controls whether syslinux is run on 'to'. (Default: false)"
DEFINE_string from "/tmp/boot" \
  "Path the legacy bootloader templates are copied from. (Default /tmp/boot)"
DEFINE_string to "/tmp/esp.img" \
  "Path to esp image (Default: /tmp/esp.img)"
DEFINE_integer to_offset 0 \
  "Offset in bytes into 'to' if it is a file (Default: 0)"
DEFINE_integer to_size -1 \
  "Size in bytes of 'to' to use if it is a file. -1 is ignored. (Default: -1)"
DEFINE_string vmlinuz "/tmp/vmlinuz" \
  "Path to the vmlinuz file to use (Default: /tmp/vmlinuz)"
# The kernel_partition and the kernel_cmdline each are used to supply
# verified boot configuration: dm="".
DEFINE_string kernel_partition "/tmp/vmlinuz.image" \
  "Path to the signed kernel image. (Default: /tmp/vmlinuz.image)"
DEFINE_string kernel_cmdline "" \
  "Kernel commandline if no kernel_partition given. (Default: '')"
DEFINE_string kernel_partition_offset "0" \
  "Offset to the kernel partition [KERN-A] (Default: 0)"
DEFINE_string kernel_partition_sectors "0" \
  "Kernel partition sectors (Default: 0)"
DEFINE_string usb_disk /dev/sdb3 \
  "Path syslinux should use to do a usb boot. Default: /dev/sdb3"

# Parse flags
FLAGS "$@" || exit 1
eval set -- "${FLAGS_ARGV}"
set -e

# If not provided by chromeos-common.sh, this will update all of the
# boot loader files (both A and B) with the data pulled
# from the kernel_partition.  The default boot target should
# be set when the rootfs is stuffed.
if ! type -p update_x86_bootloaders; then
  update_x86_bootloaders() {
    local old_root="$1"  # e.g., /dev/sd%D%P or %U+1
    local kernel_cmdline="$2"
    local esp_fs_dir="$3"
    local template_dir="$4"

    # Pull out the dm="" values
    dm_table=
    if echo "$kernel_cmdline" | grep -q 'dm="'; then
      dm_table=$(echo "$kernel_cmdline" | sed -s 's/.*dm="\([^"]*\)".*/\1/')
    fi

    # Maintain cros_debug flag in developer and test images.
    cros_flags="cros_legacy"
    if echo "$kernel_cmdline" | grep -q 'cros_debug'; then
      cros_flags="cros_legacy cros_debug"
    fi

    # Rewrite grub table
    grub_dm_table_a=${dm_table//${old_root}/\/dev\/\$linuxpartA}
    grub_dm_table_b=${dm_table//${old_root}/\/dev\/\$linuxpartB}
    sed -e "s|DMTABLEA|${grub_dm_table_a}|g" \
        -e "s|DMTABLEB|${grub_dm_table_b}|g" \
        -e "s|cros_legacy|${cros_flags}|g" \
        "${template_dir}"/efi/boot/grub.cfg |
        sudo dd of="${esp_fs_dir}"/efi/boot/grub.cfg

    # Rewrite syslinux DM_TABLE
    syslinux_dm_table_usb=${dm_table//${old_root}/${FLAGS_usb_disk}}
    sed -e "s|DMTABLEA|${syslinux_dm_table_usb}|g" \
        -e "s|cros_legacy|${cros_flags}|g" \
        "${template_dir}"/syslinux/usb.A.cfg |
        sudo dd of="${esp_fs_dir}"/syslinux/usb.A.cfg

    syslinux_dm_table_a=${dm_table//${old_root}/HDROOTA}
    sed -e "s|DMTABLEA|${syslinux_dm_table_a}|g" \
        -e "s|cros_legacy|${cros_flags}|g" \
        "${template_dir}"/syslinux/root.A.cfg |
        sudo dd of="${esp_fs_dir}"/syslinux/root.A.cfg

    syslinux_dm_table_b=${dm_table//${old_root}/HDROOTB}
    sed -e "s|DMTABLEB|${syslinux_dm_table_b}|g" \
        -e "s|cros_legacy|${cros_flags}|g" \
        "${template_dir}"/syslinux/root.B.cfg |
        sudo dd of="${esp_fs_dir}"/syslinux/root.B.cfg

    # Copy the vmlinuz's into place for syslinux
    sudo cp -f "${template_dir}"/vmlinuz "${esp_fs_dir}"/syslinux/vmlinuz.A
    sudo cp -f "${template_dir}"/vmlinuz "${esp_fs_dir}"/syslinux/vmlinuz.B

    # The only work left for the installer is to pick the correct defaults
    # and replace HDROOTA and HDROOTB with the correct /dev/sd%D%P/%U+1
  }
fi

ESP_DEV=
if [[ ! -e "${FLAGS_to}" ]]; then
  error "The ESP doesn't exist"
  # This shouldn't happen.
  info "Creating a new esp image at ${FLAGS_to}" anyway.
  # Create EFI System Partition to boot stock EFI BIOS (but not ChromeOS EFI
  # BIOS).  ARM uses this space to determine which partition is bootable.
  # NOTE: The size argument for mkfs.vfat is in 1024-byte blocks.
  # We'll hard-code it to 16M for now.
  ESP_BLOCKS=16384
  /usr/sbin/mkfs.vfat -C "${FLAGS_to}" ${ESP_BLOCKS}
  ESP_DEV=$(sudo losetup --show -f "${FLAGS_to}")
  if [ -z "${ESP_DEV}" ]; then
    die "No free loop devices."
  fi
else
  if [[ -f "${FLAGS_to}" ]]; then
    esp_offset="--offset ${FLAGS_to_offset}"
    esp_size="--sizelimit ${FLAGS_to_size}"
    if [ ${FLAGS_to_size} -lt 0 ]; then
      esp_size=
    fi
    ESP_DEV=$(sudo losetup --show -f ${esp_offset} ${esp_size} "${FLAGS_to}")
    if [ -z "${ESP_DEV}" ]; then
      die "No free loop devices."
    fi
  else
    # If it is a block device or something else, try to mount it anyway.
    ESP_DEV="${FLAGS_to}"
  fi
fi

ESP_FS_DIR=$(mktemp -d /tmp/esp.XXXXXX)
cleanup() {
  set +e
  sudo umount "${ESP_FS_DIR}"
  if [[ -n "${ESP_DEV}" && -z "${ESP_DEV//\/dev\/loop*}" ]]; then
    sudo losetup -d  "${ESP_DEV}"
  fi
  rm -rf "${ESP_FS_DIR}"
}
trap cleanup EXIT
sudo mount "${ESP_DEV}" "${ESP_FS_DIR}"

if [[ "${FLAGS_arch}" = "x86" ]]; then
  # Populate the EFI bootloader configuration
  sudo mkdir -p "${ESP_FS_DIR}/efi/boot"
  sudo cp "${FLAGS_from}"/efi/boot/bootx64.efi \
          "${ESP_FS_DIR}/efi/boot/bootx64.efi"
  sudo cp "${FLAGS_from}/efi/boot/grub.cfg" \
          "${ESP_FS_DIR}/efi/boot/grub.cfg"

  # Prepopulate the syslinux directories too and update for verified boot values
  # after the rootfs work is done.
  sudo mkdir -p "${ESP_FS_DIR}"/syslinux
  sudo cp -r "${FLAGS_from}"/syslinux/. "${ESP_FS_DIR}"/syslinux

  # Stage both kernels with the only one we built.
  sudo cp -f "${FLAGS_vmlinuz}" "${ESP_FS_DIR}"/syslinux/vmlinuz.A
  sudo cp -f "${FLAGS_vmlinuz}" "${ESP_FS_DIR}"/syslinux/vmlinuz.B

  # Extract kernel flags
  kernel_cfg=
  old_root="%U+1"
  if [[ -n "${FLAGS_kernel_cmdline}" ]]; then
    info "Using supplied kernel_cmdline to update templates."
    kernel_cfg="${FLAGS_kernel_cmdline}"
  elif [[ -n "${FLAGS_kernel_partition}" ]]; then
    info "Extracting the kernel command line from ${FLAGS_kernel_partition}"
    kernel_cfg=$(dump_kernel_config "${FLAGS_kernel_partition}")
  fi
  update_x86_bootloaders "${old_root}" \
                         "${kernel_cfg}" \
                         "${ESP_FS_DIR}" \
                         "${FLAGS_from}"

  # Install the syslinux loader on the ESP image (part 12) so it is ready when
  # we cut over from rootfs booting (extlinux).
  if [[ ${FLAGS_install_syslinux} -eq ${FLAGS_TRUE} ]]; then
    sudo umount "${ESP_FS_DIR}"
    sudo syslinux -d /syslinux "${ESP_DEV}"
    # mount again for cleanup to free resource gracefully
    sudo mount -o ro "${ESP_DEV}" "${ESP_FS_DIR}"
  fi
elif [[ "${FLAGS_arch}" = "arm" ]]; then
  # Copy u-boot script to ESP partition
  if [ -r "${FLAGS_from}/boot-A.scr.uimg" ]; then
    sudo mkdir -p "${ESP_FS_DIR}/u-boot"
    sudo cp "${FLAGS_from}/boot-A.scr.uimg" \
      "${ESP_FS_DIR}/u-boot/boot.scr.uimg"
  fi
fi

set +e