eclass/systemd.eclass

# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/systemd.eclass,v 1.31 2013/10/22 15:14:40 mgorny Exp $

# @ECLASS: systemd.eclass
# @MAINTAINER:
# systemd@gentoo.org
# @BLURB: helper functions to install systemd units
# @DESCRIPTION:
# This eclass provides a set of functions to install unit files for
# sys-apps/systemd within ebuilds.
# @EXAMPLE:
#
# @CODE
# inherit systemd
#
# src_configure() {
#	local myeconfargs=(
#		--enable-foo
#		--disable-bar
#		"$(systemd_with_unitdir)"
#	)
#
#	econf "${myeconfargs[@]}"
# }
# @CODE

inherit eutils toolchain-funcs

case ${EAPI:-0} in
	0|1|2|3|4|5) ;;
	*) die "${ECLASS}.eclass API in EAPI ${EAPI} not yet established."
esac

DEPEND="virtual/pkgconfig"

# @FUNCTION: _systemd_get_unitdir
# @INTERNAL
# @DESCRIPTION:
# Get unprefixed unitdir.
_systemd_get_unitdir() {
	if $(tc-getPKG_CONFIG) --exists systemd; then
		echo "$($(tc-getPKG_CONFIG) --variable=systemdsystemunitdir systemd)"
	else
		echo /usr/lib/systemd/system
	fi
}

# @FUNCTION: systemd_get_unitdir
# @DESCRIPTION:
# Output the path for the systemd unit directory (not including ${D}).
# This function always succeeds, even if systemd is not installed.
systemd_get_unitdir() {
	has "${EAPI:-0}" 0 1 2 && ! use prefix && EPREFIX=
	debug-print-function ${FUNCNAME} "${@}"

	echo "${EPREFIX}$(_systemd_get_unitdir)"
}

# @FUNCTION: _systemd_get_userunitdir
# @INTERNAL
# @DESCRIPTION:
# Get unprefixed userunitdir.
_systemd_get_userunitdir() {
	if $(tc-getPKG_CONFIG) --exists systemd; then
		echo "$($(tc-getPKG_CONFIG) --variable=systemduserunitdir systemd)"
	else
		echo /usr/lib/systemd/user
	fi
}

# @FUNCTION: systemd_get_userunitdir
# @DESCRIPTION:
# Output the path for the systemd user unit directory (not including
# ${D}). This function always succeeds, even if systemd is not
# installed.
systemd_get_userunitdir() {
	has "${EAPI:-0}" 0 1 2 && ! use prefix && EPREFIX=
	debug-print-function ${FUNCNAME} "${@}"

	echo "${EPREFIX}$(_systemd_get_userunitdir)"
}

# @FUNCTION: _systemd_get_utildir
# @INTERNAL
# @DESCRIPTION:
# Get unprefixed utildir.
_systemd_get_utildir() {
	if $(tc-getPKG_CONFIG) --exists systemd; then
		echo "$($(tc-getPKG_CONFIG) --variable=systemdutildir systemd)"
	else
		echo /usr/lib/systemd
	fi
}

# @FUNCTION: systemd_get_utildir
# @DESCRIPTION:
# Output the path for the systemd utility directory (not including
# ${D}). This function always succeeds, even if systemd is not
# installed.
systemd_get_utildir() {
	has "${EAPI:-0}" 0 1 2 && ! use prefix && EPREFIX=
	debug-print-function ${FUNCNAME} "${@}"

	echo "${EPREFIX}$(_systemd_get_utildir)"
}

# @FUNCTION: systemd_dounit
# @USAGE: <unit>...
# @DESCRIPTION:
# Install systemd unit(s). Uses doins, thus it is fatal in EAPI 4
# and non-fatal in earlier EAPIs.
systemd_dounit() {
	debug-print-function ${FUNCNAME} "${@}"

	(
		insinto "$(_systemd_get_unitdir)"
		doins "${@}"
	)
}

# @FUNCTION: systemd_newunit
# @USAGE: <old-name> <new-name>
# @DESCRIPTION:
# Install systemd unit with a new name. Uses newins, thus it is fatal
# in EAPI 4 and non-fatal in earlier EAPIs.
systemd_newunit() {
	debug-print-function ${FUNCNAME} "${@}"

	(
		insinto "$(_systemd_get_unitdir)"
		newins "${@}"
	)
}

# @FUNCTION: systemd_install_serviced
# @USAGE: <conf-file> [<service.d>]
# @DESCRIPTION:
# Install the file <conf-file> as service.d/00gentoo.conf template.
# The <service.d> argument specifies the configured service name.
# If not specified, the configuration file name will be used with .conf
# suffix stripped (e.g. foo.service.conf -> foo.service).
systemd_install_serviced() {
	debug-print-function ${FUNCNAME} "${@}"

	local src=${1}
	local service=${2}

	[[ ${src} ]] || die "No file specified"

	if [[ ! ${service} ]]; then
		[[ ${src} == *.conf ]] || die "Source file needs .conf suffix"
		service=${src##*/}
		service=${service%.conf}
	fi
	# avoid potentially common mistake
	[[ ${service} == *.d ]] && die "Service must not have .d suffix"

	(
		insinto /etc/systemd/system/"${service}".d
		newins "${src}" 00gentoo.conf
	)
}

# @FUNCTION: systemd_dotmpfilesd
# @USAGE: <tmpfilesd>...
# @DESCRIPTION:
# Install systemd tmpfiles.d files. Uses doins, thus it is fatal
# in EAPI 4 and non-fatal in earlier EAPIs.
systemd_dotmpfilesd() {
	debug-print-function ${FUNCNAME} "${@}"

	for f; do
		[[ ${f} == *.conf ]] \
			|| die 'tmpfiles.d files need to have .conf suffix.'
	done

	(
		insinto /usr/lib/tmpfiles.d/
		doins "${@}"
	)
}

# @FUNCTION: systemd_newtmpfilesd
# @USAGE: <old-name> <new-name>.conf
# @DESCRIPTION:
# Install systemd tmpfiles.d file under a new name. Uses newins, thus it
# is fatal in EAPI 4 and non-fatal in earlier EAPIs.
systemd_newtmpfilesd() {
	debug-print-function ${FUNCNAME} "${@}"

	[[ ${2} == *.conf ]] \
		|| die 'tmpfiles.d files need to have .conf suffix.'

	(
		insinto /usr/lib/tmpfiles.d/
		newins "${@}"
	)
}

# @FUNCTION: systemd_enable_service
# @USAGE: <target> <service>
# @DESCRIPTION:
# Enable service in desired target, e.g. install a symlink for it.
# Uses dosym, thus it is fatal in EAPI 4 and non-fatal in earlier
# EAPIs.
systemd_enable_service() {
	debug-print-function ${FUNCNAME} "${@}"

	[[ ${#} -eq 2 ]] || die "Synopsis: systemd_enable_service target service"

	local target=${1}
	local service=${2}
	local ud=$(_systemd_get_unitdir)
	local destname=${service##*/}

	dodir "${ud}"/"${target}".wants && \
	dosym ../"${service}" "${ud}"/"${target}".wants/"${destname}"
}

# @FUNCTION: systemd_enable_ntpunit
# @USAGE: <NN-name> <service>...
# @DESCRIPTION:
# Add an NTP service provider to the list of implementations
# in timedated. <NN-name> defines the newly-created ntp-units.d priority
# and name, while the remaining arguments list service units that will
# be added to that file.
#
# Uses doins, thus it is fatal in EAPI 4 and non-fatal in earlier
# EAPIs.
#
# Doc: http://www.freedesktop.org/wiki/Software/systemd/timedated/
systemd_enable_ntpunit() {
	debug-print-function ${FUNCNAME} "${@}"
	if [[ ${#} -lt 2 ]]; then
		die "Usage: systemd_enable_ntpunit <NN-name> <service>..."
	fi

	local ntpunit_name=${1}
	local services=( "${@:2}" )

	if [[ ${ntpunit_name} != [0-9][0-9]-* ]]; then
		die "ntpunit.d file must be named NN-name where NN are digits."
	elif [[ ${ntpunit_name} == *.list ]]; then
		die "The .list suffix is appended implicitly to ntpunit.d name."
	fi

	local unitdir=$(systemd_get_unitdir)
	local s
	for s in "${services[@]}"; do
		if [[ ! -f "${D}${unitdir}/${s}" ]]; then
			die "ntp-units.d provider ${s} not installed (yet?) in \${D}."
		fi
		echo "${s}" >> "${T}"/${ntpunit_name}.list
	done

	(
		insinto "$(_systemd_get_utildir)"/ntp-units.d
		doins "${T}"/${ntpunit_name}.list
	)
	local ret=${?}

	rm "${T}"/${ntpunit_name}.list || die

	return ${ret}
}

# @FUNCTION: systemd_with_unitdir
# @USAGE: [<configure-option-name>]
# @DESCRIPTION:
# Output '--with-systemdsystemunitdir' as expected by systemd-aware configure
# scripts. This function always succeeds. Its output may be quoted in order
# to preserve whitespace in paths. systemd_to_myeconfargs() is preferred over
# this function.
#
# If upstream does use invalid configure option to handle installing systemd
# units (e.g. `--with-systemdunitdir'), you can pass the 'suffix' as an optional
# argument to this function (`$(systemd_with_unitdir systemdunitdir)'). Please
# remember to report a bug upstream as well.
systemd_with_unitdir() {
	debug-print-function ${FUNCNAME} "${@}"
	local optname=${1:-systemdsystemunitdir}

	echo --with-${optname}="$(systemd_get_unitdir)"
}

# @FUNCTION: systemd_with_utildir
# @DESCRIPTION:
# Output '--with-systemdsystemutildir' as used by some packages to install
# systemd helpers. This function always succeeds. Its output may be quoted
# in order to preserve whitespace in paths.
systemd_with_utildir() {
	debug-print-function ${FUNCNAME} "${@}"

	echo --with-systemdutildir="$(systemd_get_utildir)"
}

# @FUNCTION: systemd_to_myeconfargs
# @DESCRIPTION:
# Add '--with-systemdsystemunitdir' as expected by systemd-aware configure
# scripts to the myeconfargs variable used by autotools-utils eclass. Handles
# quoting automatically.
systemd_to_myeconfargs() {
	debug-print-function ${FUNCNAME} "${@}"

	eqawarn 'systemd_to_myeconfargs() is deprecated and will be removed on 2013-10-11.'
	eqawarn 'Please use $(systemd_with_unitdir) instead.'

	myeconfargs=(
		"${myeconfargs[@]}"
		--with-systemdsystemunitdir="$(systemd_get_unitdir)"
	)
}

# @FUNCTION: systemd_update_catalog
# @DESCRIPTION:
# Update the journald catalog. This needs to be called after installing
# or removing catalog files.
#
# If systemd is not installed, no operation will be done. The catalog
# will be (re)built once systemd is installed.
#
# See: http://www.freedesktop.org/wiki/Software/systemd/catalog
systemd_update_catalog() {
	debug-print-function ${FUNCNAME} "${@}"

	# Make sure to work on the correct system.

	local journalctl=${EPREFIX}/usr/bin/journalctl
	if [[ -x ${journalctl} ]]; then
		ebegin "Updating systemd journal catalogs"
		journalctl --update-catalog
		eend $?
	else
		debug-print "${FUNCNAME}: journalctl not found."
	fi
}

# @FUNCTION: systemd_is_booted
# @DESCRIPTION:
# Check whether the system was booted using systemd.
#
# This should be used purely for informational purposes, e.g. warning
# user that he needs to use systemd. Installed files or application
# behavior *must not* rely on this. Please remember to check MERGE_TYPE
# to not trigger the check on binary package build hosts!
#
# Returns 0 if systemd is used to boot the system, 1 otherwise.
#
# See: man sd_booted
systemd_is_booted() {
	debug-print-function ${FUNCNAME} "${@}"

	[[ -d /run/systemd/system ]]
	local ret=${?}

	debug-print "${FUNCNAME}: [[ -d /run/systemd/system ]] -> ${ret}"
	return ${ret}
}