# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/distutils-r1.eclass,v 1.20 2012/11/26 10:05:11 mgorny Exp $

# @ECLASS: distutils-r1
# @MAINTAINER:
# Michał Górny <mgorny@gentoo.org>
# Python herd <python@gentoo.org>
# @AUTHOR:
# Author: Michał Górny <mgorny@gentoo.org>
# Based on the work of: Krzysztof Pawlik <nelchael@gentoo.org>
# @BLURB: A simple eclass to build Python packages using distutils.
# @DESCRIPTION:
# A simple eclass providing functions to build Python packages using
# the distutils build system. It exports phase functions for all
# the src_* phases. Each of the phases runs two pseudo-phases:
# python_..._all() (e.g. python_prepare_all()) once in ${S}, then
# python_...() (e.g. python_prepare()) for each implementation
# (see: python_foreach_impl() in python-r1).
#
# In distutils-r1_src_prepare(), the 'all' function is run before
# per-implementation ones (because it creates the implementations),
# per-implementation functions are run in a random order.
#
# In remaining phase functions, the per-implementation functions are run
# before the 'all' one, and they are ordered from the least to the most
# preferred implementation (so that 'better' files overwrite 'worse'
# ones).
#
# If the ebuild doesn't specify a particular pseudo-phase function,
# the default one will be used (distutils-r1_...). Defaults are provided
# for all per-implementation pseudo-phases, python_prepare_all()
# and python_install_all(); whenever writing your own pseudo-phase
# functions, you should consider calling the defaults (and especially
# distutils-r1_python_prepare_all).
#
# Please note that distutils-r1 sets RDEPEND and DEPEND unconditionally
# for you.
#
# Also, please note that distutils-r1 will always inherit python-r1
# as well. Thus, all the variables defined and documented there are
# relevant to the packages using distutils-r1.
#
# For more information, please see the python-r1 Developer's Guide:
# http://www.gentoo.org/proj/en/Python/python-r1/dev-guide.xml

case "${EAPI:-0}" in
	0|1|2|3)
		die "Unsupported EAPI=${EAPI:-0} (too old) for ${ECLASS}"
		;;
	4|5)
		;;
	*)
		die "Unsupported EAPI=${EAPI} (unknown) for ${ECLASS}"
		;;
esac

if [[ ! ${_DISTUTILS_R1} ]]; then

inherit eutils python-r1

fi

EXPORT_FUNCTIONS src_prepare src_configure src_compile src_test src_install

if [[ ! ${_DISTUTILS_R1} ]]; then

RDEPEND=${PYTHON_DEPS}
DEPEND=${PYTHON_DEPS}

# @ECLASS-VARIABLE: PATCHES
# @DEFAULT_UNSET
# @DESCRIPTION:
# An array containing patches to be applied to the sources before
# copying them.
#
# If unset, no custom patches will be applied.
#
# Please note, however, that at some point the eclass may apply
# additional distutils patches/quirks independently of this variable.
#
# Example:
# @CODE
# PATCHES=( "${FILESDIR}"/${P}-make-gentoo-happy.patch )
# @CODE

# @ECLASS-VARIABLE: DOCS
# @DEFAULT_UNSET
# @DESCRIPTION:
# An array containing documents installed using dodoc. The files listed
# there must exist in the directory from which
# distutils-r1_python_install_all() is run (${S} by default).
#
# If unset, the function will instead look up files matching default
# filename pattern list (from the Package Manager Specification),
# and install those found.
#
# Example:
# @CODE
# DOCS=( NEWS README )
# @CODE

# @ECLASS-VARIABLE: HTML_DOCS
# @DEFAULT_UNSET
# @DESCRIPTION:
# An array containing documents installed using dohtml. The files
# and directories listed there must exist in the directory from which
# distutils-r1_python_install_all() is run (${S} by default).
#
# If unset, no HTML docs will be installed.
#
# Example:
# @CODE
# HTML_DOCS=( doc/html/ )
# @CODE

# @ECLASS-VARIABLE: DISTUTILS_IN_SOURCE_BUILD
# @DEFAULT_UNSET
# @DESCRIPTION:
# If set to a non-null value, in-source builds will be enabled.
# If unset, the default is to use in-source builds when python_prepare()
# is declared, and out-of-source builds otherwise.
#
# If in-source builds are used, the eclass will create a copy of package
# sources for each Python implementation in python_prepare_all(),
# and work on that copy afterwards.
#
# If out-of-source builds are used, the eclass will instead work
# on the sources directly, prepending setup.py arguments with
# 'build --build-base ${BUILD_DIR}' to enforce keeping & using built
# files in the specific root.

# @ECLASS-VARIABLE: mydistutilsargs
# @DEFAULT_UNSET
# @DESCRIPTION:
# An array containing options to be passed to setup.py.
#
# Example:
# @CODE
# python_configure_all() {
# 	mydistutilsargs=( --enable-my-hidden-option )
# }
# @CODE

# @FUNCTION: esetup.py
# @USAGE: [<args>...]
# @DESCRIPTION:
# Run the setup.py using currently selected Python interpreter
# (if ${PYTHON} is set; fallback 'python' otherwise). The setup.py will
# be passed default command-line arguments, then ${mydistutilsargs[@]},
# then any parameters passed to this command.
#
# This command dies on failure.
esetup.py() {
	debug-print-function ${FUNCNAME} "${@}"

	local args=()
	if [[ ! ${DISTUTILS_IN_SOURCE_BUILD} ]]; then
		if [[ ! ${BUILD_DIR} ]]; then
			die 'Out-of-source build requested, yet BUILD_DIR unset.'
		fi

		args+=(
			build
			--build-base "${BUILD_DIR}"
			# using a single directory for them helps us export ${PYTHONPATH}
			--build-lib "${BUILD_DIR}/lib"
		)
	fi

	set -- "${PYTHON:-python}" setup.py \
		"${args[@]}" "${mydistutilsargs[@]}" "${@}"

	echo "${@}" >&2
	"${@}" || die
}

# @FUNCTION: distutils-r1_python_prepare_all
# @DESCRIPTION:
# The default python_prepare_all(). It applies the patches from PATCHES
# array, then user patches and finally calls python_copy_sources to
# create copies of resulting sources for each Python implementation.
#
# At some point in the future, it may also apply eclass-specific
# distutils patches and/or quirks.
distutils-r1_python_prepare_all() {
	debug-print-function ${FUNCNAME} "${@}"

	[[ ${PATCHES} ]] && epatch "${PATCHES[@]}"

	epatch_user

	# by default, use in-source build if python_prepare() is used
	if [[ ! ${DISTUTILS_IN_SOURCE_BUILD+1} ]]; then
		if declare -f python_prepare >/dev/null; then
			DISTUTILS_IN_SOURCE_BUILD=1
		fi
	fi

	if [[ ${DISTUTILS_IN_SOURCE_BUILD} ]]; then
		# create source copies for each implementation
		python_copy_sources
	fi
}

# @FUNCTION: distutils-r1_python_prepare
# @DESCRIPTION:
# The default python_prepare(). Currently it is a no-op
# but in the future it may apply implementation-specific quirks
# to the build system.
distutils-r1_python_prepare() {
	debug-print-function ${FUNCNAME} "${@}"

	:
}

# @FUNCTION: distutils-r1_python_configure
# @DESCRIPTION:
# The default python_configure(). Currently a no-op.
distutils-r1_python_configure() {
	debug-print-function ${FUNCNAME} "${@}"

	:
}

# @FUNCTION: distutils-r1_python_compile
# @USAGE: [additional-args...]
# @DESCRIPTION:
# The default python_compile(). Runs 'esetup.py build'. Any parameters
# passed to this function will be passed to setup.py.
distutils-r1_python_compile() {
	debug-print-function ${FUNCNAME} "${@}"

	esetup.py build "${@}"
}

# @FUNCTION: distutils-r1_python_test
# @DESCRIPTION:
# The default python_test(). Currently a no-op.
distutils-r1_python_test() {
	debug-print-function ${FUNCNAME} "${@}"

	:
}

# @FUNCTION: distutils-r1_rename_scripts
# @DESCRIPTION:
# Renames installed Python scripts to be implementation-suffixed.
# ${PYTHON} has to be set to the expected Python executable (which
# hashbang will be grepped for), and ${EPYTHON} to the implementation
# name (for new name).
distutils-r1_rename_scripts() {
	debug-print-function ${FUNCNAME} "${@}"

	local f
	# XXX: change this if we ever allow directories in bin/sbin
	for f in "${D}"/{bin,sbin,usr/bin,usr/sbin}/*; do
		if [[ -x ${f} ]]; then
			debug-print "${FUNCNAME}: found executable at ${f#${D}/}"

			if [[ "$(head -n 1 "${f}")" == '#!'*${EPYTHON}* ]]
			then
				debug-print "${FUNCNAME}: matching shebang: $(head -n 1 "${f}")"

				local newf=${f}-${EPYTHON}
				debug-print "${FUNCNAME}: renamed to ${newf#${D}/}"
				mv "${f}" "${newf}" || die
			fi
		fi
	done
}

# @FUNCTION: distutils-r1_python_install
# @USAGE: [additional-args...]
# @DESCRIPTION:
# The default python_install(). Runs 'esetup.py install', appending
# the optimization flags. Then calls distutils-r1_rename_scripts.
# Any parameters passed to this function will be passed to setup.py.
distutils-r1_python_install() {
	debug-print-function ${FUNCNAME} "${@}"

	local flags

	case "${EPYTHON}" in
		jython*)
			flags=(--compile);;
		*)
			flags=(--compile -O2);;
	esac
	debug-print "${FUNCNAME}: [${EPYTHON}] flags: ${flags}"

	# enable compilation for the install phase.
	local PYTHONDONTWRITEBYTECODE
	export PYTHONDONTWRITEBYTECODE

	esetup.py install "${flags[@]}" --root="${D}" "${@}"

	distutils-r1_rename_scripts
}

# @FUNCTION: distutils-r1_python_install_all
# @DESCRIPTION:
# The default python_install_all(). It symlinks wrappers
# for the implementation-suffixed executables and installs
# documentation.
distutils-r1_python_install_all() {
	debug-print-function ${FUNCNAME} "${@}"

	if declare -p DOCS &>/dev/null; then
		dodoc "${DOCS[@]}" || die "dodoc failed"
	else
		local f
		# same list as in PMS
		for f in README* ChangeLog AUTHORS NEWS TODO CHANGES \
				THANKS BUGS FAQ CREDITS CHANGELOG; do
			if [[ -s ${f} ]]; then
				dodoc "${f}" || die "(default) dodoc ${f} failed"
			fi
		done
	fi

	if declare -p HTML_DOCS &>/dev/null; then
		dohtml -r "${HTML_DOCS[@]}" || die "dohtml failed"
	fi

	# note: keep in sync with ...rename_scripts()
	# also, we assume that each script is installed for all impls
	local EPYTHON
	python_export_best EPYTHON

	local f
	while IFS= read -r -d '' f; do
		debug-print "${FUNCNAME}: found executable at ${f#${D}/}"

		local wrapf=${f%-${EPYTHON}}

		_python_ln_rel "${ED}"/usr/bin/python-exec "${wrapf}" || die
	done < <(find "${D}" -type f -executable -name "*-${EPYTHON}" -print0)
}

# @FUNCTION: distutils-r1_run_phase
# @USAGE: [<argv>...]
# @INTERNAL
# @DESCRIPTION:
# Run the given command.
#
# If out-of-source builds are used, the phase function is run in source
# directory, with BUILD_DIR pointing at the build directory
# and PYTHONPATH having an entry for the module build directory.
#
# If in-source builds are used, the command is executed in the BUILD_DIR
# (the directory holding per-implementation copy of sources).
distutils-r1_run_phase() {
	debug-print-function ${FUNCNAME} "${@}"

	if [[ ${DISTUTILS_IN_SOURCE_BUILD} ]]; then
		pushd "${BUILD_DIR}" &>/dev/null || die
	else
		local PYTHONPATH="${BUILD_DIR}/lib:${PYTHONPATH}"
		export PYTHONPATH
	fi

	"${@}" || die "${1} failed."

	if [[ ${DISTUTILS_IN_SOURCE_BUILD} ]]; then
		popd &>/dev/null || die
	fi
}

distutils-r1_src_prepare() {
	debug-print-function ${FUNCNAME} "${@}"

	# common preparations
	if declare -f python_prepare_all >/dev/null; then
		python_prepare_all
	else
		distutils-r1_python_prepare_all
	fi

	if declare -f python_prepare >/dev/null; then
		python_foreach_impl distutils-r1_run_phase python_prepare
	else
		python_foreach_impl distutils-r1_run_phase distutils-r1_python_prepare
	fi
}

distutils-r1_src_configure() {
	if declare -f python_configure >/dev/null; then
		python_foreach_impl distutils-r1_run_phase python_configure
	else
		python_foreach_impl distutils-r1_run_phase distutils-r1_python_configure
	fi

	if declare -f python_configure_all >/dev/null; then
		python_configure_all
	fi
}

distutils-r1_src_compile() {
	debug-print-function ${FUNCNAME} "${@}"

	if declare -f python_compile >/dev/null; then
		python_foreach_impl distutils-r1_run_phase python_compile
	else
		python_foreach_impl distutils-r1_run_phase distutils-r1_python_compile
	fi

	if declare -f python_compile_all >/dev/null; then
		python_compile_all
	fi
}

distutils-r1_src_test() {
	debug-print-function ${FUNCNAME} "${@}"

	if declare -f python_test >/dev/null; then
		python_foreach_impl distutils-r1_run_phase python_test
	else
		python_foreach_impl distutils-r1_run_phase distutils-r1_python_test
	fi

	if declare -f python_test_all >/dev/null; then
		python_test_all
	fi
}

distutils-r1_src_install() {
	debug-print-function ${FUNCNAME} "${@}"

	if declare -f python_install >/dev/null; then
		python_foreach_impl distutils-r1_run_phase python_install
	else
		python_foreach_impl distutils-r1_run_phase distutils-r1_python_install
	fi

	if declare -f python_install_all >/dev/null; then
		python_install_all
	else
		distutils-r1_python_install_all
	fi
}

_DISTUTILS_R1=1
fi