# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
# Distributed under the terms of the GNU General Public License v2
#
# Original Author: The Chromium OS Authors <chromium-os-dev@chromium.org>
# Purpose: Generate shell script containing firmware update bundle.
#

# Skip unibuild if we don't have a board set.
if [[ ${#CROS_BOARDS[@]} -eq 0 ]]; then
	CROS_BOARDS=( "none" )
fi

if [[ -z "${EBUILD}" ]]; then
	die "This eclass needs EBUILD environment variable."
fi

inherit cros-workon cros-unibuild cros-constants

# @ECLASS-VARIABLE: CROS_FIRMWARE_BCS_OVERLAY
# @DESCRIPTION: (Optional) Name of board overlay on Binary Component Server
: ${CROS_FIRMWARE_BCS_OVERLAY:=$(
	# EBUILD will be the full path to the ebuild file.
	IFS="/"
	set -- ${EBUILD}
	# Chop off the ebuild, the $PN dir, and the $CATEGORY dir.
	n=$(( $# - 3 ))
	echo "${!n}"
)}

# @ECLASS-VARIABLE: CROS_FIRMWARE_MAIN_IMAGE
# @DESCRIPTION: (Optional) Location of system firmware (BIOS) image
: ${CROS_FIRMWARE_MAIN_IMAGE:=}

# @ECLASS-VARIABLE: CROS_FIRMWARE_MAIN_RW_IMAGE
# @DESCRIPTION: (Optional) Location of RW system firmware image
: ${CROS_FIRMWARE_MAIN_RW_IMAGE:=}

# @ECLASS-VARIABLE: CROS_FIRMWARE_EC_IMAGE
# @DESCRIPTION: (Optional) Location of EC firmware image
: ${CROS_FIRMWARE_EC_IMAGE:=}

# @ECLASS-VARIABLE: CROS_FIRMWARE_PD_IMAGE
# @DESCRIPTION: (Optional) Location of PD firmware image
: ${CROS_FIRMWARE_PD_IMAGE:=}

# Check for EAPI 2+
case "${EAPI:-0}" in
2|3|4|5|6) ;;
*) die "unsupported EAPI (${EAPI}) in eclass (${ECLASS})" ;;
esac

# $board-overlay/make.conf may contain these flags to always create "firmware
# from source".
IUSE="bootimage cros_ec cros_ish unibuild"

# "futility update" is needed when building and running updater package.
COMMON_DEPEND=" chromeos-base/vboot_reference "

# For unibuild we need EAPI 5 for the sub-slot dependency feature.
case "${EAPI:-0}" in
5|6)
	COMMON_DEPEND+=" unibuild? (
			chromeos-base/chromeos-config:=
		) "
	;;
esac

# Dependency for SFX v1 (needed by both build and run time).
COMMON_DEPEND+="
	app-arch/gzip
	app-arch/sharutils
	app-arch/tar
	sys-apps/util-linux
	"

# Apply common dependency.
DEPEND="${COMMON_DEPEND}"
RDEPEND="${COMMON_DEPEND}"

# Dependency for run time only (invoked by `futility update`).
RDEPEND+="
	chromeos-base/vpd
	sys-apps/flashrom
	sys-apps/mosys
	cros_ish? ( chromeos-base/chromeos-ish )
	"
# Maintenance note:  The factory install shim downloads and executes
# the firmware updater.  Consequently, run time dependencies for the
# updater are also run time dependencies for the install shim.
#
# The contents of RDEPEND must also be present in the
# chromeos-base/factory_installer ebuild in PROVIDED_DEPEND.  If you make any
# change to the list above, you may need to make a matching change in the
# factory_installer ebuild.

# Dependency to build firmware from source (build phase only).
DEPEND+="
	bootimage? ( sys-boot/chromeos-bootimage )
	cros_ec? ( chromeos-base/chromeos-ec )
	"

RESTRICT="mirror"

# Local variables.

UPDATE_SCRIPT="chromeos-firmwareupdate"
FW_IMAGE_LOCATION=""
FW_RW_IMAGE_LOCATION=""
EC_IMAGE_LOCATION=""
PD_IMAGE_LOCATION=""

# Output the URI associated with a file to download. This can be added to the
# SRC_URI variable.
# Portage will then take care of downloading these files before the src_unpack
# phase starts.
# Args
#   $1: Input file to read, with prefix (e.g. "bcs://Reef.9042.72.0.tbz2")
#   $2: Overlay name (e.g. "reef-private")
#   $3: Board directory containing file (e.g. "chromeos-firmware-reef")
_add_uri() {
	local input="$1"
	local overlay="$2"
	local board="$3"
	local protocol="${input%%://*}"
	local uri="${input#*://}"
	local user="bcs-${overlay#variant-*-}"
	local bcs_url="gs://chromeos-binaries/HOME/${user}/overlay-${overlay}"

	# Input without ${protocol} are local files (ex, ${FILESDIR}/file).
	case "${protocol}" in
		bcs)
			echo "${bcs_url}/${CATEGORY}/${board}/${uri}"
			;;
		http|https|gs)
			echo "${input}"
			;;
	esac
}

# Output a URL for the given firmware variable.
# This calls _add_uri() after setting up the required parameters.
#  $1: Variable containing the required filename (e.g. "FW_IMAGE_LOCATION")
_add_source() {
	local var="$1"
	local src_uri="$2"
	local overlay="${CROS_FIRMWARE_BCS_OVERLAY#overlay-}"
	local input="${!var}"

	_add_uri "${input}" "${overlay}" "${PN}"
}

_unpack_archive() {
	local var="$1"
	local input="${!var}"
	local archive="${input##*/}"
	local folder="${S}/.dist/${archive}"

	# Remote source files (bcs://, http://, ...) are downloaded into
	# ${DISTDIR}, which is the default location for command 'unpack'.
	# For any other files (ex, ${FILESDIR}/file), use complete file path.
	local unpack_name="${input}"
	if [[ "${unpack_name}" =~ "://" ]]; then
		input="${DISTDIR}/${archive}"
		unpack_name="${archive}"
	fi

	case "${input##*.}" in
		tar|tbz2|tbz|bz|gz|tgz|zip|xz) ;;
		*)
			eval ${var}="'${input}'"
			return
			;;
	esac

	mkdir -p "${folder}" || die "Not able to create ${folder}"
	(cd "${folder}" && unpack "${unpack_name}") ||
		die "Failed to unpack ${unpack_name}."
	local contents=($(ls "${folder}"))
	if [[ ${#contents[@]} -gt 1 ]]; then
		# Currently we can only serve one file (or directory).
		ewarn "WARNING: package ${input} contains multiple files."
	fi
	eval ${var}="'${folder}/${contents}'"
}

cros-firmware_src_unpack() {
	case "${EAPI:-0}" in
	1|2|3|4)
		use unibuild &&
			die "Update your EAPI version to 5 to use unibuild"
		;;
	esac

	cros-workon_src_unpack
	local i

	if ! use unibuild; then
		for i in {FW,FW_RW,EC,PD}_IMAGE_LOCATION; do
			_unpack_archive ${i}
		done
	fi
}

# Add members to an array.
#  $1: Array variable to append to.
#  $2..: Arguments to append, each to be put in its own array element.
_append_var() {
	local var="$1"
	shift
	eval "${var}+=( \"\$@\" )"
}

# Add a string command-line flag with its value to an array.
# If the value is empty then this function does nothing.
#  $1: Array variable to append to.
#  $2: Flag (e.g. "-b").
#  $3: Value (e.g. "bios.bin").
_add_param() {
	local var="$1"
	local flag="$2"
	local value="$3"

	[[ -n "${value}" ]] && _append_var "${var}" "${flag}" "${value}"
}

# Add a string command-line flag with its file argument to an array.
# If the file does not exists then this function does nothing.
#  $1: Array variable to append to.
#  $2: Flag (e.g. "-b").
#  $3: File path (e.g. "bios.bin").
_add_file_param() {
	local var="$1"
	local flag="$2"
	local value="$3"

	[[ -e "${value}" ]] && _append_var "${var}" "${flag}" "${value}"
}

# Add a boolean command-line flag to an array.
# If the value is empty then this function does nothing, otherwise it
# appends the flag.
#  $1: Array variable to append to.
#  $2: Flag (e.g. "--create_bios_rw_image").
#  $3: Value (e.g. "${IMAGE}"), only used to determine flag presence.
_add_bool_param() {
	local var="$1"
	local flag="$2"
	local value="$3"

	[[ -n "${value}" ]] && _append_var "${var}" "${flag}"
}

cros-firmware_src_compile() {
	# image_cmd will be reset when creating local updaters.
	# ext_cmd will be reused when creating local updaters.
	local image_cmd=() ext_cmd=()
	local root="${SYSROOT%/}"
	local output="${UPDATE_SCRIPT}"

	# We need lddtree from chromite.
	export PATH="${CHROMITE_BIN_DIR}:${PATH}"

	if use unibuild; then
		_add_param ext_cmd -i "${DISTDIR}"
		_add_param ext_cmd -c "${root}${UNIBOARD_YAML_CONFIG}"
	else
		ext_cmd+=(--legacy)
		_add_param image_cmd -b "${FW_IMAGE_LOCATION}"
		_add_param image_cmd -e "${EC_IMAGE_LOCATION}"
		_add_param image_cmd -p "${PD_IMAGE_LOCATION}"
		_add_param image_cmd -w "${FW_RW_IMAGE_LOCATION}"
	fi

	if [ ${#image_cmd[@]} -eq 0 ] && ! use unibuild; then
		# Create an empty update script for the generic case
		# (no need to update)
		einfo "Building empty firmware update script"
		echo -n >"${output}"
	else
		einfo "Build ${BOARD_USE} firmware updater to ${output}:" \
			"${image_cmd[*]} ${ext_cmd[*]}"
		./pack_firmware.py "${image_cmd[@]}" "${ext_cmd[@]}" \
			-o "${output}" || die "Cannot pack firmware updater."
	fi

	if ! use bootimage; then
		if use cros_ec; then
			# TODO(hungte) Deal with a platform that has only EC and
			# no BIOS, which is usually incorrect configuration.  We
			# only warn here to allow for BCS based firmware to
			# still generate a proper chromeos-firmwareupdate update
			# script.
			ewarn "WARNING: platform has no local BIOS."
			ewarn "EC-only is not supported."
			ewarn "Not generating a local updater script."
		fi
		return
	fi

	# Create local updaters. image_cmd is cleared and ext_cmd is kept.
	image_cmd=()
	output="updater.sh"
	local local_root="${root}/firmware"
	if use unibuild; then
		ext_cmd+=(--local)
		# Tell pack_firmware.py where to find the files.
		# 'BUILD_TARGET' will be replaced with the build-targets config
		# from the unified build config file. Since these path do not
		# exist, we can't use _add_file_param.
		_add_param image_cmd -b "${local_root}/image-BUILD_TARGET.bin"
		local_root+="/BUILD_TARGET"
		if use cros_ec; then
			_add_param image_cmd -e "${local_root}/ec.bin"
			_add_param image_cmd -p "${local_root}/pd.bin"
		fi
	else
		_add_param image_cmd -b "${local_root}/image.bin"
		_add_file_param image_cmd -e "${local_root}/ec.bin"
		_add_file_param image_cmd -p "${local_root}/pd.bin"
	fi

	einfo "Build ${BOARD_USE} local firmware updater to ${output}:" \
		"${image_cmd[*]} ${ext_cmd[*]}"
	./pack_firmware.py -o "${output}" "${image_cmd[@]}" "${ext_cmd[@]}" ||
		die "Cannot pack firmware updater."

	if [[ ! -s "${UPDATE_SCRIPT}" ]]; then
		# When no pre-built binaries are available,
		# dupe local updater to system updater.
		cp -f "${output}" "${UPDATE_SCRIPT}"
	fi

}

cros-firmware_src_install() {
	# install updaters for firmware-from-source archive.
	if use bootimage; then
		exeinto /firmware
		doexe updater.sh
	fi

	# skip anything else if no main updater program.
	if [[ ! -s "${UPDATE_SCRIPT}" ]]; then
		return
	fi

	# install the main updater program if available.
	dosbin "${UPDATE_SCRIPT}"

	dosbin "${S}"/sbin/*
	# install ${FILESDIR}/sbin/* (usually board-setgoodfirmware).
	if [[ -d "${FILESDIR}"/sbin ]]; then
		dosbin "${FILESDIR}"/sbin/*
	fi
}

# Trigger tests on each firmware build. While there is a chromeos-firmware-1
# ebuild which could be used to run these tests on the host, it doesn't do
# anything at present, and the usual workflow is to build firmware for a
# particular board. This way it is more likely that people will see any
# failures in their normal workflow.
cros-firmware_src_test() {
	local fname

	# We need lddtree from chromite.
	export PATH="${CHROMITE_BIN_DIR}:${PATH}"

	for fname in *test.py; do
		einfo "Running tests in ${fname}"
		python "${fname}" || die "Tests failed at ${fname}"
	done
}

# @FUNCTION: _expand_list
# @USAGE <var> <ifs> <string>
# @DESCRIPTION:
# Internal function to expand a string (separated by ifs) into bash array.
_expand_list() {
	local var="$1" ifs="$2"
	IFS="${ifs}" read -r -a ${var} <<<"${*:3}"
}

# Add any files mentioned in the master configuration to SRC_URI so that they
# will be downloaded if unibuild is enabled.
cros-firmware_setup_source_unibuild() {
	local uri_list

	uri_list=$(cros_config_host_local get-firmware-uris)
	if [[ -n "${uri_list// }" ]]; then
		SRC_URI+="unibuild? ( ${uri_list} )"
	fi
}

# @FUNCTION: cros-firmware_setup_source
# @DESCRIPTION:
# Configures all firmware binary source files to SRC_URI, and updates local
# destination mapping (*_LOCATION). Must be invoked after CROS_FIRMWARE_*_IMAGE
# are set. This also reads the master configuration if available and adds files
# from there for unified builds. The result is something like:
#
# SRC_URI="!unibuild? ( file1 file2 ) unibuild? ( file3 file3 )"
#
# With this we will end up downloading either the unibuild files or the
# !unibuild files, depending on the 'unibuild' USE flag.
cros-firmware_setup_source() {
	# This function is called before FILESDIR is set so figure it out from
	# the ebuild filename.
	local basedir="${EBUILD%/*}"
	local files="${basedir}/files"
	local i uris

	if [[ -f "${files}/srcuris" ]]; then
		mapfile -t uris -d ' ' < "${files}/srcuris"
		SRC_URI+=( "${uris[@]}" )
		return
	fi

	FW_IMAGE_LOCATION="${CROS_FIRMWARE_MAIN_IMAGE}"
	FW_RW_IMAGE_LOCATION="${CROS_FIRMWARE_MAIN_RW_IMAGE}"
	EC_IMAGE_LOCATION="${CROS_FIRMWARE_EC_IMAGE}"
	PD_IMAGE_LOCATION="${CROS_FIRMWARE_PD_IMAGE}"

	# Add these files for use if unibuild is not set.
	for i in {FW,FW_RW,EC,PD}_IMAGE_LOCATION; do
		uris+=" $(_add_source ${i})"
	done

	if [[ -n "${uris// }" ]]; then
		SRC_URI+="!unibuild? ( ${uris} ) "
	fi

	# Now add files for use if USE=unibuild is enabled.
	cros-firmware_setup_source_unibuild
}

# If "inherit cros-firmware" appears at end of ebuild file, build source URI
# automatically. Otherwise, you have to put an explicit call to
# "cros-firmware_setup_source" at end of ebuild file.
[[ -n "${CROS_FIRMWARE_MAIN_IMAGE}" ]] && cros-firmware_setup_source

EXPORT_FUNCTIONS src_unpack src_compile src_install src_test