Copyright 2015 The Chromium OS Authors. All rights reserved.
Use of this source code is governed by a BSD-style license that can be
found in the LICENSE file.

------------------------------
Instructions for enabling sshd
------------------------------

Normally base images will not automatically start sshd on boot. If sshd is
needed, below are a few recommended ways to start it, from simplest to most
complicated.


1. OOBE debugging features.
  This is the easiest way to enable sshd, but if OOBE has already been bypassed
  the machine will have to be powerwashed first to get back to OOBE.

  Enabling the OOBE debugging features will cause sshd to start automatically
  on each boot, and both password and test key access will be enabled.

  For more information on OOBE debugging features, see
  dev.chromium.org/chromium-os/how-tos-and-troubleshooting/debugging-features.


2. Run a helper program.
  An executable named dev_features_ssh is available to enable sshd. Rootfs
  verification must be removed first or the helper program will have no effect.

  This will cause sshd to start automatically on each boot with test key
  access. Password access can optionally be enabled after rootfs verification
  has been removed.

  # Remove rootfs verification.
  $ /usr/share/vboot/bin/make_dev_ssd.sh --remove_rootfs_verification
  $ reboot

  # Install sshd startup files.
  $ /usr/libexec/debugd/helpers/dev_features_ssh

  # Allow password access (optional).
  $ passwd


3. Manually start sshd.
  This is the least convenient option, but doesn't require OOBE or rootfs
  verification removal, so can be used without changing the system too much.

  Unlike the above methods, this will not auto-start sshd on boot.
  Additionally, password access is not possible without rootfs verification
  removal, so test keys must be used to SSH into the device.

  # Create host keys (only needs to be done once).
  $ mkdir -p /mnt/stateful_partition/etc/ssh
  $ ssh-keygen -f /mnt/stateful_partition/etc/ssh/ssh_host_rsa_key -N '' -t rsa
  $ ssh-keygen -f /mnt/stateful_partition/etc/ssh/ssh_host_ed25519_key -N '' -t ed25519

  # Open firewall and start sshd (must be done on every boot).
  $ iptables -A INPUT -p tcp --dport 22 -j ACCEPT
  $ /usr/sbin/sshd \
    -oAuthorizedKeysFile=/usr/share/chromeos-ssh-config/keys/authorized_keys