Image Customizer for Container-Optimized OS from Google

Note: This is not an official Google product.

The COS Customizer is a tool for creating customized Container-Optimized OS images. It uses Daisy to create a COS VM instance, load data onto the instance, and create a disk image from the modified instance.

Currently, the COS Customizer is intended to be run as part of a Google Cloud Build workflow as a sequence of Google Cloud Build build steps. No other usage mode is currently supported.

Accessing the cos-customizer container image

The container image is available at gcr.io/cos-cloud/cos-customizer. Alternatively, it can be built from source using Bazel. To build COS customizer and load the image into Docker, run:

$ bazel run //:cos_customizer -- --norun

The COS Customizer docker image will then be available in Docker as bazel:cos_customizer.

Quick Start

The COS Customizer is intended to be run as a sequence of steps in a Google Cloud Build workflow. It is implemented and distributed as a Docker container. Each subcommand of the COS Customizer implements a Google Cloud Build build step. Two of these steps need to be present for every image build, and the rest of the steps are optional steps that can be used for customizing a COS image.

The required build steps are the start-image-build and finish-image-build steps. The start-image-build step initializes local state for the image build, and the finish-image-build step performs the image building operation with Daisy.

Example optional build steps are run-script, install-gpu, seal-oem and disable-auto-update.
run-scriptallows users to customize an image by running a script.
install-gpu allows users to install GPU drivers using the COS GPU installer.
seal-oem allows users to setup a verified read-only OEM partition. It will be verified when the VM boots and when the data inside are accessed.
disable-auto-update allows users to disable the auto-update service. And it will reclaim the disk space of the unused root partition.

COS Customizer Design

See the DESIGN.md document for more information on the design particulars of the customizer.

Minimal example

Here is a minimal Google Cloud Build workflow demonstrating usage of the COS Customizer. It customizes the image cos-stable-68-10718-86-0 by running the script preload.sh. This results in an image with the custom file /var/lib/hello.

$ cat preload.sh
echo "Hello, World!" > /var/lib/hello
$ cat cloudbuild.yaml
steps:
- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['start-image-build',
         '-image-name=cos-stable-68-10718-86-0',
         '-image-project=cos-cloud',
         '-gcs-bucket=${PROJECT_ID}_cloudbuild',
         '-gcs-workdir=image-build-$BUILD_ID']
- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['run-script',
         '-script=preload.sh']
- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['finish-image-build',
         '-zone=us-west1-b',
         '-project=$PROJECT_ID',
         '-image-name=my-custom-image',
         '-image-project=$PROJECT_ID']
timeout: '1500s'
$ gcloud builds submit --config=cloudbuild.yaml .

Build Steps

The COS Customizer is different from typical Google Cloud Build build steps. Most build steps, like the gcr.io/cloud-builders/gcloud build step, are single-purpose container images that are capable of being useful when run in isolation. The COS Customizer is not one of these build steps.

The COS Customizer is a container image that provides a collection of Google Cloud Build build steps that are intended to be used together. When run in sequence as part of a Google Cloud Build workflow, these build steps create a Compute Engine disk image.

Each build step is invoked as a subcommand of the COS Customizer container image; for example, usage of the run-script build step works as follows:

...
- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['run-script',
         '-script=preload.sh']
...

Required build steps

Two build steps are required for each image build operation; the start-image-build step and the finish-image-build step.

The start-image-build step

The primary purpose of this step is to initialize the image build process. It only initializes local state in the Google Cloud Build builder. It does not create any cloud resources. It must run before all of the other steps in the image build process, and it must only be run once. It takes the following flags:

-build-context: A path to a file or directory that should be relative to the default Google Cloud Build working directory. Defaults to .. The contents of this path will be copied to the builder VM in a temporary directory. All scripts specified by a run-script step will execute with this directory as a working directory. For example, suppose that the source directory provided to Google Cloud Build looked like this:

.
├── lib
│   └── mylib.sh
└── main.sh

If -build-context is set to ., this directory structure will be copied to the builder VM and will be the working directory for all specified run-script steps. If a run-script step runs the script main.sh, main.sh will have access to lib/mylib.sh. However, suppose -build-context is set to lib; then, a run-script step that specifies main.sh will fail, since main.sh won't be included in the working directory on the builder VM. Specifying mylib.sh in a run-script step would be valid in this case though.

-gcs-bucket: A GCS bucket to use for scratch space. Optional build steps are free to use this bucket for scratch space. Normally, it's expected that only finish-image-build will use this GCS bucket. finish-image-build uses this GCS bucket for transferring binary blobs to the builder VM.

-gcs-workdir: A directory in the aforementioned GCS bucket that will be used for scratch space.

-image-project: The Google Cloud Platform (GCP) project that contains the source image; that is, the image to customize.

-image-name: The name of the source image. Mutually exclusive with -image-milestone and -image-family.

-image-milestone: The milestone of the source image. If -image-milestone is specified and -image-project is set to cos-cloud, the start-image-build step will resolve the source image by finding the latest image in cos-cloud on the specified milestone. An example value for this field is 69. Mutually exclusive with -image-name and -image-family.

-image-family: The family of the source image. If -image-family is specified, the start-image-build step will resolve the source image by finding the latest active image in the specified image family. This is done using Google Compute Engine's getFromFamily API. Mutually exclusive with -image-name and -image-milestone.

An example start-image-build step looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['start-image-build',
         '-image-name=cos-stable-68-10718-86-0',
         '-image-project=cos-cloud',
         '-gcs-bucket=${PROJECT_ID}_cloudbuild',
         '-gcs-workdir=image-build-$BUILD_ID']

The finish-image-build step

The primary purpose of this step is to execute the steps specified in the image build process. This step creates a builder VM, runs configured scripts on it, and creates a disk image from the VM. It must run after all of the other steps in an image build process. This step will clean up the local state stored by previous COS Customizer steps; a new image build process can be started after a finish-image-build step. It takes the following flags:

-image-project: The GCP project that should contain the output image.

-image-name: The name of the output image. Mutually exclusive with -image-suffix.

-image-suffix: Construct the name of the output image by appending the specified suffix to the name of the input image. Mutually exclusive with -image-name.

-image-family: An image family to assign the output image to.

-deprecate-old-images: If present, the image build process will deprecate all of the old images in the output image's image family. Can only be specified if -image-family is specified.

-old-image-ttl: Time-to-live in seconds to apply to images deprecated by -deprecate-old-images. Configures the “deleted” field of the image's deprecation status to be this many seconds after the image is deprecated. Can only be used if -deprecate-old-images is also given.

-zone: The GCE zone in which to perform the image building operation. This is an important consideration when installing GPU drivers on the image, since installing GPU drivers requires that GPU quota is available in this zone.

-project: The GCP project to use for the image building operation.

-labels: Key-value pairs to apply to the output image as image labels. Example: -labels=cos_image=true,milestone=65

-licenses: A list of licenses to apply to the output image. License names must be formatted as projects/{project}/global/licenses/{license}. Example: -licenses=projects/cos-cloud/global/licenses/cos

-inherit-labels: If present, the output image will be assigned the exact same image labels present on the source image. The labels specified by the -labels flag take precedence over labels assigned with this flag.

-disk-type: The disk type for the preload VM to use when creating the image. Defaults to pd-standard.

-disk-size-gb: The disk size in GB to use when creating the image. This value should never be smaller than 10 (the default size of a COS image). If -oem-size is set, the lower limit of -disk-size-gb is as shown in the following table. The larger one of the value in the table and 10 is effective. See section -oem-size, seal-oem and disable-auto-update for details.

disk-size-gb-lower-limitno seal-oemseal-oem
no disable-auto-update10GB + oem-size10GB + oem-size x 2 - 2046MB
disable-auto-update10GB + oem-size - 2046MB10GB + oem-size x 2 - 2046MB

Note that if seal-oem is run without specifying -oem-size, the lower limit of -disk-size-gb will be 10.

-oem-size: The file system size of the extended OEM partition with unit G,M,K or B. If no unit is provided, it will be parsed as the number of sectors of 512 Bytes. Since the default size of the OEM partition in a COS image is assumed to be 16MB, this value must be no smaller than 16MB, otherwise the build will fail. Make sure the disk size is large enough if this flag is used to extend the OEM partition. If the seal-oem or disable-auto-update is run, the OEM partition will firstly use the reclaimed space. See section -disk-size-gb for the limits of the disk size value. Example: -oem-size=500M

Note that this feature is supported by COS versions higher than milestone 73 (included).

-timeout: Timeout value of this step. Must be formatted according to Golang's time.Duration string format. Defaults to “1h0m0s”. Keep in mind that this timeout value is different from the overall Cloud Build workflow timeout value, which is set at the Cloud Build workflow level. If this timeout value expires, resources created during the image build process will be properly cleaned up. If the overall Cloud Build workflow timeout expires, the task will be cancelled without any opportunity to clean up resources.

-machine-type: The machine type to use for the COS Customizer preload VM. Defaults to n1-standard-1. Useful for optimizing costs. Note that this is separate from the Cloud Build machine type option, which sets the machine type of the Cloud Build VM, which is different from the COS Customizer preload VM.

-network: The network/VPC to use for the COS Customizer preload VM. The network must have access to Google Cloud Storage. Defaults to default network global/networks/default. If -subnet is also specified subnet must be a subnetwork of network specified by -network.

-subnet: The subnet to use for the COS Customizer preload VM. Defaults to default network global/networks/default. If the network is in auto subnet mode, the subnetwork is optional. If the network is in custom subnet mode, then this field should be specified. Zone should be specified if this field is specified.

-enable-cleanup: If this flag is set, COS-Customizer will automatically delete old VMs created by previous invocations in the project and zone set by -project and -zone.

-sbom-input-path: Path to the input JSON file for SBOM generation. This path is relative to -build-context set in step start-image-build. Schema for the input:

{
  "outputImageName": <Optional>"customized-image",
  "outputImageVersion": <Optional>"1.2.3",
  "creators": <Required>["Organization: Google LLC"],
  "supplier": <Optional>"Organization: Google LLC",
  "SPDXPackages": <Optional>[
    {
      "name": <Required>"package-A",
      "SPDXID": <Required>"SPDXRef-package-A",
      "versionInfo": <Required>"1.2.3",
      "supplier": <Optional>"Organization: Google LLC",
      "filesAnalyzed": <Optional>false,
      "licenseDeclared": <Optional>"BSD-3-Clause AND Apache-2.0 AND LicenseRef-A",
      "licenseConcluded": <Optional>"BSD-3-Clause AND Apache-2.0 AND LicenseRef-A",
      "downloadLocation": <Optional>"https://package/download/url",
      "externalRefs": <Optional>[
        {
          "referenceCategory": <Required>"SECURITY",
          "referenceLocator": <Required>"cpe:/a:vendor:package-A:1.2.3",
          "referenceType": <Required>"cpe23Type"
        }
      ],
      "checksums": <Optional>[
        {
          "algorithm": <Required>"SHA1",
          "checksumValue": <Required>"11d7774ac38f40e009dcee453a760750aea75bbd"
        }
      ]
    }
  ],
  "SBOMPackages": <Optional>[
    {
      "name": <Required>"package-B",
      "spdxDocument": <Required>"URL to package-B SBOM",
      "algorithm": <Required>"SHA1",
      "checksumValue": <Required>"11d7774ac38f40e009dcee453a760750aea75bbd"
    }
  ],
  "hasExtractedLicensingInfos": <Optional>[
    {
      "licenseId": <Required>"LicenseRef-A",
      "extractedText": <Required>"extracted-license-text",
      "crossRefs": <Optional>["https://package/download/url/LICENSE.txt"]
    }
  ]
}

Note: SPDXPackages has the same schema as field packages in SPDX JSON Schema. Field filesAnalyzed in SPDXPackages can be ambiguous in JSON format so it should be set explicitly.

-sbom-output-path: The GCS path for storing the output SBOM. The complete output file path is <sbom-output-path>/<outputImageName>-<outputImageVersion>_sbom.json. If outputImageName is not set in the input, the path will be <sbom-output-path>/<actualOutputImageName>_sbom.json.

An example finish-image-build step looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['finish-image-build',
         '-zone=us-west1-b',
         '-project=$PROJECT_ID',
         '-image-name=my-custom-image',
         '-image-project=$PROJECT_ID']

An example finish-image-build step with network and subnet looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['finish-image-build',
         '-zone=us-west1-b',
         '-project=$PROJECT_ID',
         '-network=global/networks/auto-vpc',
         '-subnet=regions/us-west1/subnetworks/auto-vpc-subnet-us-west1',
         '-image-name=my-custom-image',
         '-image-project=$PROJECT_ID']

Optional build steps

The rest of the build steps provided by COS Customizer are optional; if they are not included, the image build will run successfully, but will generate an image that is identical to the source image. Optional build steps are used to make meaningful changes to an image.

run-script

The run-script build step configures the image build to run a script on the builder VM. If multiple run-script steps are given, the scripts specified by each step will run in the same order in which the run-script steps were given. It takes the following flags:

-script: A path to the script to run. The path should be relative to the root of the build context provided in start-image-build.

-env: Key-value pairs indicating environment variables to provide to the script when it is run. Example: -env=RELEASE=1,FOO=bar

An example run-script step looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['run-script',
         '-script=preload.sh']

install-gpu

The install-gpu build step configures the image build to install GPU drivers on the builder VM. GPU drivers are installed using the COS GPU installer. Currently, this installer gets pulled from GCR at runtime onto the preload VM meaning that the preload VM must have access to gcr. In addition to installing GPU drivers, the install-gpu step installs a script named setup_gpu.sh in the GPU driver install directory. In order to use the installed GPU drivers, this script must be run every time the system boots. It should be executed as part of a startup script or cloud config. install-gpu takes the following flags:

-version: The GPU driver version to install. Currently, we only support installing Tesla drivers that are present in the nvidia-drivers-us-public GCS bucket. The set of supported drivers can be found by running the install-gpu step independently on your local machine with the -get-driver-version flag. Example: -version=396.26

-get-driver-version: Prints out the list of supported driver versions to stdout and exits. If this flag is provided, the build step doesn't do anything meaningful; it only prints the list of supported driver versions. It is not intended to be used in a Google Cloud Build workflow; it is meant to be run independently for users to easily see the set of supported driver versions.

-md5sum: If you have the md5sum of the driver you want to install, you can provide it here and the COS GPU installer will verify the driver with this md5sum.

-install-dir: The directory on the image to install GPU drivers to. The setup_gpu.sh script will also be installed in this directory. Make sure to choose a directory that will persist across reboots; for the most part, this means a subdirectory of /var or /home.

-gpu-type: The type of GPU to use to verify correct installation of GPU drivers. The valid values here are nvidia-tesla-k80, nvidia-tesla-p100, and nvidia-tesla-v100. This value has no impact on the drivers that are installed on the image; it is only used when verifying that the driver installation succeeded. Make sure that the zone you are running the image build in has quota for a GPU of this type.

An example install-gpu step looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['install-gpu',
         '-version=396.26']

Note that when using an image customized with install-gpu, the hosted docker container should be set to run in privileged mode so that it has access to the GPU device on the host machine.

seal-oem

The seal-oem build step utilizes dm-verity to verify the data in the OEM partition when the system boots and when data are accessed. If the verification fails, the system will refuse to boot or will panic. This step takes no flags and needs to be run after any step that makes changes to the OEM partition (/dev/sda8 or /usr/share/oem).

If this step is run, the size of the OEM partition will be doubled to store the hash tree for verification in the second half of the partition. If -oem-size in finish-image-build step is not set, the file system size of the OEM partition will be assumed to be the same as the default size, 16MB. And the size of the OEM partition will be doubled to 32MB.

The auto-update service is automatically disabled in this step. So it is not necessary to run the disable-auto-update step explicitly. This will reclaim the unused space and the OEM partition will firstly use the reclaimed space. See section -disk-size-gb for the limits of the disk size value. If the disk size is not large enough, the build will fail.

After running this build step, the OEM partition will not be automatically mounted when the system boots.
sudo mount /dev/dm-1 /usr/share/oem should be added to startup script or cloud init to mount the OEM partition.

Note that this feature is supported by COS versions higher than milestone 73 (included).

anthos-installer-install

The anthos-installer-install build step installs the application binaries such as kubernetes, crictl and node-problem-detector on the builder VM based on the package spec in YAML format using the Anthos installer. Sample package spec is here. This step takes one flag, pkgspec-url, path to the directory containing the pkgspec files. The pkgspec-url can point to the

  • Local directory

  • Archive file(.tar.gz) consisting of pkgspec files i.e. local or remote file in GCS(gs://), and http(http://)/https(https://) location.

    The Anthos Installer is limited to the fact that it doesn’t check the compatibility or the dependencies of the input packages on COS. The Anthos Installer works on the assumption that the dependencies are installed on the OS or fully specified by the YAML file.

An example anthos-installer-install with input, a local directory step looks like the following:

- name: 'gcr.io/cos-cloud/cos-customizer'
  args: ['anthos-installer-install',
         '-pkgspec-url=testing/install_packages_test/pkgspec']

An example with PkgSpec in GCS bucket.

 - name: 'gcr.io/cos-cloud/cos-customizer'
   args: ['anthos-installer-install',
          '-pkgspec-url=gs://test-bucket/pkgspec.tar.gz']

The anthos-installer-install step can also be used to preload the containers. One such example is implemented in preload-container.yaml. It supports different loader options such as docker, containerd and crictl.

disable-auto-update

The disable-auto-update build step modifies the kernel commandline to disable the auto-update serive. This step takes no flags.

The root partition that is used by auto-update service will not be needed anymore, so the disk space (2046MB) of that partition will be reclaimed. The reclaimed space will be used by the OEM partition if extended and the stateful partition.

Note that this feature is supported by COS versions higher than milestone 73 (included).

Contributor Docs

Releasing

To release a new version of COS Customizer, tag the commit you want to release with the date in the form of vYYYYMMDD. This will trigger a Cloud Build job to build and release the container image.