base_config: &base_config
  name: "{{$device-name}}"
  identity:
    platform-name: "Sarien"
    smbios-name-match: "{{$fw-name}}"
    sku-id: "{{$sku-id}}"
  firmware:
    no-firmware: True
  power:
    low-battery-shutdown-percent: "4.0"
    power-supply-full-factor: "1.00"
    suspend-to-idle: "1"
    has-charge-controller: "1"
    $internal-backlight-no-als-battery-brightness: "50"
    internal-backlight-no-als-battery-brightness: "{{$internal-backlight-no-als-battery-brightness}}"
    min-visible-backlight-level: "8400"
    max-dark-suspend-delay-timeout-ms: "1800000"
    disable-dark-resume: "0"
  hardware-properties:
    is-lid-convertible: "{{$is-lid-convertible-val}}"
    has-lid-accelerometer: "{{$has-lid-accelerometer-val}}"
    has-base-accelerometer: "{{$has-base-accelerometer-val}}"
    has-lid-gyroscope: "{{$has-lid-gyroscope-val}}"
    has-lid-magnetometer: "{{$has-lid-magnetometer-val}}"
    has-touchscreen: "{{$has-touchscreen-val}}"
  audio:
    main:
      $cras_root: "/etc/cras"
      $ucm_src_root: "{{$audio-device-name}}"
      $ucm_root: "/usr/share/alsa/ucm"
      $card: "HDA\ Intel\ PCH"
      cras-config-dir: "{{$audio-device-name}}"
      ucm-suffix: "{{$audio-device-name}}"
      $alsa_module_src_root: "common"
      $modprobe_root: "/etc/modprobe.d"
      $fw_patch_root: "/lib/firmware"
      files:
        # ALSA UCM configuration file
        - source: "{{$ucm_src_root}}/audio/ucm-config/{{$card}}/{{$card}}.conf"
          destination: "{{$ucm_root}}/{{$card}}.{{ucm-suffix}}/{{$card}}.{{ucm-suffix}}.conf"
        # ALSA UCM SectionUseCase configuration (defined in UCM conf file)
        - source: "{{$ucm_src_root}}/audio/ucm-config/{{$card}}/HiFi.conf"
          destination: "{{$ucm_root}}/{{$card}}.{{ucm-suffix}}/HiFi.conf"
        # ALSA module conf file
        - source: "{{$alsa_module_src_root}}/audio/alsa-module-config/alsa-sarien.conf"
          destination: "{{$modprobe_root}}/alsa-sarien.conf"
        # ALSA module patch file
        - source: "{{$alsa_module_src_root}}/audio/alsa-module-config/sarien_alsa.fw"
          destination: "{{$fw_patch_root}}/sarien_alsa.fw"
        # Volume Curve configuration file
        - source: "{{$audio-device-name}}/audio/cras-config/{{$card}}"
          destination: "{{$cras_root}}/{{cras-config-dir}}/{{$card}}"
        # EQ/DRC DSP configuration file
        - source: "{{$audio-device-name}}/audio/cras-config/dsp.ini"
          destination: "{{$cras_root}}/{{cras-config-dir}}/dsp.ini"
  test-label: "{{$device-name}}"

sarien-config: &sarien-config
  <<: *base_config
  $fw-name: "Sarien"
  $is-lid-convertible-val: False
  $has-lid-accelerometer-val: False
  $has-base-accelerometer-val: False
  $has-lid-gyroscope-val: False
  $has-lid-magnetometer-val: False
  $has-touchscreen-val: True
  # Set default panel brightness to ~80nits on battery for 220 nits panel.
  $internal-backlight-no-als-battery-brightness: "60"
  $audio-device-name: "sarien"

sarien-signed-config: &sarien-signed-config
  <<: *sarien-config

arcada-config: &arcada-config
  <<: *base_config
  $fw-name: "Arcada"
  $is-lid-convertible-val: True
  $has-lid-accelerometer-val: True
  $has-base-accelerometer-val: True
  $has-lid-gyroscope-val: True
  $has-lid-magnetometer-val: True
  $has-touchscreen-val: True
  $audio-device-name: "arcada"

arcada-signed-config: &arcada-signed-config
  <<: *arcada-config

chromeos:
  devices:
    - $device-name: "sarien"
      skus:
        - $sku-id: 1
          config: *sarien-config
    # Same model as Sarien but with signed EC image
    - $device-name: "sarien_signed"
      skus:
        - $sku-id: 3
          config: *sarien-signed-config
    - $device-name: "arcada"
      skus:
        - $sku-id: 2
          config: *arcada-config
    # Same model as Arcada but with signed EC image
    - $device-name: "arcada_signed"
      skus:
        - $sku-id: 4
          config: *arcada-signed-config