| % texinfo.tex -- TeX macros to handle Texinfo files. |
| % |
| % Load plain if necessary, i.e., if running under initex. |
| \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi |
| % |
| \def\texinfoversion{2007-09-03.05} |
| % |
| % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 2007, |
| % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, |
| % 2007 Free Software Foundation, Inc. |
| % |
| % This texinfo.tex file is free software: you can redistribute it and/or |
| % modify it under the terms of the GNU General Public License as |
| % published by the Free Software Foundation, either version 3 of the |
| % License, or (at your option) any later version. |
| % |
| % This texinfo.tex file is distributed in the hope that it will be |
| % useful, but WITHOUT ANY WARRANTY; without even the implied warranty |
| % of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| % General Public License for more details. |
| % |
| % You should have received a copy of the GNU General Public License |
| % along with this program. If not, see <http://www.gnu.org/licenses/>. |
| % |
| % As a special exception, when this file is read by TeX when processing |
| % a Texinfo source document, you may use the result without |
| % restriction. (This has been our intent since Texinfo was invented.) |
| % |
| % Please try the latest version of texinfo.tex before submitting bug |
| % reports; you can get the latest version from: |
| % http://www.gnu.org/software/texinfo/ (the Texinfo home page), or |
| % ftp://tug.org/tex/texinfo.tex |
| % (and all CTAN mirrors, see http://www.ctan.org). |
| % The texinfo.tex in any given distribution could well be out |
| % of date, so if that's what you're using, please check. |
| % |
| % Send bug reports to bug-texinfo@gnu.org. Please include including a |
| % complete document in each bug report with which we can reproduce the |
| % problem. Patches are, of course, greatly appreciated. |
| % |
| % To process a Texinfo manual with TeX, it's most reliable to use the |
| % texi2dvi shell script that comes with the distribution. For a simple |
| % manual foo.texi, however, you can get away with this: |
| % tex foo.texi |
| % texindex foo.?? |
| % tex foo.texi |
| % tex foo.texi |
| % dvips foo.dvi -o # or whatever; this makes foo.ps. |
| % The extra TeX runs get the cross-reference information correct. |
| % Sometimes one run after texindex suffices, and sometimes you need more |
| % than two; texi2dvi does it as many times as necessary. |
| % |
| % It is possible to adapt texinfo.tex for other languages, to some |
| % extent. You can get the existing language-specific files from the |
| % full Texinfo distribution. |
| % |
| % The GNU Texinfo home page is http://www.gnu.org/software/texinfo. |
| |
| |
| \message{Loading texinfo [version \texinfoversion]:} |
| |
| % If in a .fmt file, print the version number |
| % and turn on active characters that we couldn't do earlier because |
| % they might have appeared in the input file name. |
| \everyjob{\message{[Texinfo version \texinfoversion]}% |
| \catcode`+=\active \catcode`\_=\active} |
| |
| |
| \chardef\other=12 |
| |
| % We never want plain's \outer definition of \+ in Texinfo. |
| % For @tex, we can use \tabalign. |
| \let\+ = \relax |
| |
| % Save some plain tex macros whose names we will redefine. |
| \let\ptexb=\b |
| \let\ptexbullet=\bullet |
| \let\ptexc=\c |
| \let\ptexcomma=\, |
| \let\ptexdot=\. |
| \let\ptexdots=\dots |
| \let\ptexend=\end |
| \let\ptexequiv=\equiv |
| \let\ptexexclam=\! |
| \let\ptexfootnote=\footnote |
| \let\ptexgtr=> |
| \let\ptexhat=^ |
| \let\ptexi=\i |
| \let\ptexindent=\indent |
| \let\ptexinsert=\insert |
| \let\ptexlbrace=\{ |
| \let\ptexless=< |
| \let\ptexnewwrite\newwrite |
| \let\ptexnoindent=\noindent |
| \let\ptexplus=+ |
| \let\ptexrbrace=\} |
| \let\ptexslash=\/ |
| \let\ptexstar=\* |
| \let\ptext=\t |
| |
| % If this character appears in an error message or help string, it |
| % starts a new line in the output. |
| \newlinechar = `^^J |
| |
| % Use TeX 3.0's \inputlineno to get the line number, for better error |
| % messages, but if we're using an old version of TeX, don't do anything. |
| % |
| \ifx\inputlineno\thisisundefined |
| \let\linenumber = \empty % Pre-3.0. |
| \else |
| \def\linenumber{l.\the\inputlineno:\space} |
| \fi |
| |
| % Set up fixed words for English if not already set. |
| \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi |
| \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi |
| \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi |
| \ifx\putwordin\undefined \gdef\putwordin{in}\fi |
| \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi |
| \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi |
| \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi |
| \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi |
| \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi |
| \ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi |
| \ifx\putwordof\undefined \gdef\putwordof{of}\fi |
| \ifx\putwordon\undefined \gdef\putwordon{on}\fi |
| \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi |
| \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi |
| \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi |
| \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi |
| \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi |
| \ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi |
| \ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi |
| % |
| \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi |
| \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi |
| \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi |
| \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi |
| \ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi |
| \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi |
| \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi |
| \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi |
| \ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi |
| \ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi |
| \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi |
| \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi |
| % |
| \ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi |
| \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi |
| \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi |
| \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi |
| \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi |
| |
| % Since the category of space is not known, we have to be careful. |
| \chardef\spacecat = 10 |
| \def\spaceisspace{\catcode`\ =\spacecat} |
| |
| % sometimes characters are active, so we need control sequences. |
| \chardef\colonChar = `\: |
| \chardef\commaChar = `\, |
| \chardef\dashChar = `\- |
| \chardef\dotChar = `\. |
| \chardef\exclamChar= `\! |
| \chardef\lquoteChar= `\` |
| \chardef\questChar = `\? |
| \chardef\rquoteChar= `\' |
| \chardef\semiChar = `\; |
| \chardef\underChar = `\_ |
| |
| % Ignore a token. |
| % |
| \def\gobble#1{} |
| |
| % The following is used inside several \edef's. |
| \def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} |
| |
| % Hyphenation fixes. |
| \hyphenation{ |
| Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script |
| ap-pen-dix bit-map bit-maps |
| data-base data-bases eshell fall-ing half-way long-est man-u-script |
| man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm |
| par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces |
| spell-ing spell-ings |
| stand-alone strong-est time-stamp time-stamps which-ever white-space |
| wide-spread wrap-around |
| } |
| |
| % Margin to add to right of even pages, to left of odd pages. |
| \newdimen\bindingoffset |
| \newdimen\normaloffset |
| \newdimen\pagewidth \newdimen\pageheight |
| |
| % For a final copy, take out the rectangles |
| % that mark overfull boxes (in case you have decided |
| % that the text looks ok even though it passes the margin). |
| % |
| \def\finalout{\overfullrule=0pt} |
| |
| % @| inserts a changebar to the left of the current line. It should |
| % surround any changed text. This approach does *not* work if the |
| % change spans more than two lines of output. To handle that, we would |
| % have adopt a much more difficult approach (putting marks into the main |
| % vertical list for the beginning and end of each change). |
| % |
| \def\|{% |
| % \vadjust can only be used in horizontal mode. |
| \leavevmode |
| % |
| % Append this vertical mode material after the current line in the output. |
| \vadjust{% |
| % We want to insert a rule with the height and depth of the current |
| % leading; that is exactly what \strutbox is supposed to record. |
| \vskip-\baselineskip |
| % |
| % \vadjust-items are inserted at the left edge of the type. So |
| % the \llap here moves out into the left-hand margin. |
| \llap{% |
| % |
| % For a thicker or thinner bar, change the `1pt'. |
| \vrule height\baselineskip width1pt |
| % |
| % This is the space between the bar and the text. |
| \hskip 12pt |
| }% |
| }% |
| } |
| |
| % Sometimes it is convenient to have everything in the transcript file |
| % and nothing on the terminal. We don't just call \tracingall here, |
| % since that produces some useless output on the terminal. We also make |
| % some effort to order the tracing commands to reduce output in the log |
| % file; cf. trace.sty in LaTeX. |
| % |
| \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% |
| \def\loggingall{% |
| \tracingstats2 |
| \tracingpages1 |
| \tracinglostchars2 % 2 gives us more in etex |
| \tracingparagraphs1 |
| \tracingoutput1 |
| \tracingmacros2 |
| \tracingrestores1 |
| \showboxbreadth\maxdimen \showboxdepth\maxdimen |
| \ifx\eTeXversion\undefined\else % etex gives us more logging |
| \tracingscantokens1 |
| \tracingifs1 |
| \tracinggroups1 |
| \tracingnesting2 |
| \tracingassigns1 |
| \fi |
| \tracingcommands3 % 3 gives us more in etex |
| \errorcontextlines16 |
| }% |
| |
| % add check for \lastpenalty to plain's definitions. If the last thing |
| % we did was a \nobreak, we don't want to insert more space. |
| % |
| \def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount |
| \removelastskip\penalty-50\smallskip\fi\fi} |
| \def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount |
| \removelastskip\penalty-100\medskip\fi\fi} |
| \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount |
| \removelastskip\penalty-200\bigskip\fi\fi} |
| |
| % For @cropmarks command. |
| % Do @cropmarks to get crop marks. |
| % |
| \newif\ifcropmarks |
| \let\cropmarks = \cropmarkstrue |
| % |
| % Dimensions to add cropmarks at corners. |
| % Added by P. A. MacKay, 12 Nov. 1986 |
| % |
| \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines |
| \newdimen\cornerlong \cornerlong=1pc |
| \newdimen\cornerthick \cornerthick=.3pt |
| \newdimen\topandbottommargin \topandbottommargin=.75in |
| |
| % Output a mark which sets \thischapter, \thissection and \thiscolor. |
| % We dump everything together because we only have one kind of mark. |
| % This works because we only use \botmark / \topmark, not \firstmark. |
| % |
| % A mark contains a subexpression of the \ifcase ... \fi construct. |
| % \get*marks macros below extract the needed part using \ifcase. |
| % |
| % Another complication is to let the user choose whether \thischapter |
| % (\thissection) refers to the chapter (section) in effect at the top |
| % of a page, or that at the bottom of a page. The solution is |
| % described on page 260 of The TeXbook. It involves outputting two |
| % marks for the sectioning macros, one before the section break, and |
| % one after. I won't pretend I can describe this better than DEK... |
| \def\domark{% |
| \toks0=\expandafter{\lastchapterdefs}% |
| \toks2=\expandafter{\lastsectiondefs}% |
| \toks4=\expandafter{\prevchapterdefs}% |
| \toks6=\expandafter{\prevsectiondefs}% |
| \toks8=\expandafter{\lastcolordefs}% |
| \mark{% |
| \the\toks0 \the\toks2 |
| \noexpand\or \the\toks4 \the\toks6 |
| \noexpand\else \the\toks8 |
| }% |
| } |
| % \topmark doesn't work for the very first chapter (after the title |
| % page or the contents), so we use \firstmark there -- this gets us |
| % the mark with the chapter defs, unless the user sneaks in, e.g., |
| % @setcolor (or @url, or @link, etc.) between @contents and the very |
| % first @chapter. |
| \def\gettopheadingmarks{% |
| \ifcase0\topmark\fi |
| \ifx\thischapter\empty \ifcase0\firstmark\fi \fi |
| } |
| \def\getbottomheadingmarks{\ifcase1\botmark\fi} |
| \def\getcolormarks{\ifcase2\topmark\fi} |
| |
| % Avoid "undefined control sequence" errors. |
| \def\lastchapterdefs{} |
| \def\lastsectiondefs{} |
| \def\prevchapterdefs{} |
| \def\prevsectiondefs{} |
| \def\lastcolordefs{} |
| |
| % Main output routine. |
| \chardef\PAGE = 255 |
| \output = {\onepageout{\pagecontents\PAGE}} |
| |
| \newbox\headlinebox |
| \newbox\footlinebox |
| |
| % \onepageout takes a vbox as an argument. Note that \pagecontents |
| % does insertions, but you have to call it yourself. |
| \def\onepageout#1{% |
| \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi |
| % |
| \ifodd\pageno \advance\hoffset by \bindingoffset |
| \else \advance\hoffset by -\bindingoffset\fi |
| % |
| % Do this outside of the \shipout so @code etc. will be expanded in |
| % the headline as they should be, not taken literally (outputting ''code). |
| \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi |
| \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% |
| \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi |
| \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% |
| % |
| {% |
| % Have to do this stuff outside the \shipout because we want it to |
| % take effect in \write's, yet the group defined by the \vbox ends |
| % before the \shipout runs. |
| % |
| \indexdummies % don't expand commands in the output. |
| \normalturnoffactive % \ in index entries must not stay \, e.g., if |
| % the page break happens to be in the middle of an example. |
| % We don't want .vr (or whatever) entries like this: |
| % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} |
| % "\acronym" won't work when it's read back in; |
| % it needs to be |
| % {\code {{\tt \backslashcurfont }acronym} |
| \shipout\vbox{% |
| % Do this early so pdf references go to the beginning of the page. |
| \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi |
| % |
| \ifcropmarks \vbox to \outervsize\bgroup |
| \hsize = \outerhsize |
| \vskip-\topandbottommargin |
| \vtop to0pt{% |
| \line{\ewtop\hfil\ewtop}% |
| \nointerlineskip |
| \line{% |
| \vbox{\moveleft\cornerthick\nstop}% |
| \hfill |
| \vbox{\moveright\cornerthick\nstop}% |
| }% |
| \vss}% |
| \vskip\topandbottommargin |
| \line\bgroup |
| \hfil % center the page within the outer (page) hsize. |
| \ifodd\pageno\hskip\bindingoffset\fi |
| \vbox\bgroup |
| \fi |
| % |
| \unvbox\headlinebox |
| \pagebody{#1}% |
| \ifdim\ht\footlinebox > 0pt |
| % Only leave this space if the footline is nonempty. |
| % (We lessened \vsize for it in \oddfootingyyy.) |
| % The \baselineskip=24pt in plain's \makefootline has no effect. |
| \vskip 24pt |
| \unvbox\footlinebox |
| \fi |
| % |
| \ifcropmarks |
| \egroup % end of \vbox\bgroup |
| \hfil\egroup % end of (centering) \line\bgroup |
| \vskip\topandbottommargin plus1fill minus1fill |
| \boxmaxdepth = \cornerthick |
| \vbox to0pt{\vss |
| \line{% |
| \vbox{\moveleft\cornerthick\nsbot}% |
| \hfill |
| \vbox{\moveright\cornerthick\nsbot}% |
| }% |
| \nointerlineskip |
| \line{\ewbot\hfil\ewbot}% |
| }% |
| \egroup % \vbox from first cropmarks clause |
| \fi |
| }% end of \shipout\vbox |
| }% end of group with \indexdummies |
| \advancepageno |
| \ifnum\outputpenalty>-20000 \else\dosupereject\fi |
| } |
| |
| \newinsert\margin \dimen\margin=\maxdimen |
| |
| \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} |
| {\catcode`\@ =11 |
| \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi |
| % marginal hacks, juha@viisa.uucp (Juha Takala) |
| \ifvoid\margin\else % marginal info is present |
| \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi |
| \dimen@=\dp#1\relax \unvbox#1\relax |
| \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi |
| \ifr@ggedbottom \kern-\dimen@ \vfil \fi} |
| } |
| |
| % Here are the rules for the cropmarks. Note that they are |
| % offset so that the space between them is truly \outerhsize or \outervsize |
| % (P. A. MacKay, 12 November, 1986) |
| % |
| \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} |
| \def\nstop{\vbox |
| {\hrule height\cornerthick depth\cornerlong width\cornerthick}} |
| \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} |
| \def\nsbot{\vbox |
| {\hrule height\cornerlong depth\cornerthick width\cornerthick}} |
| |
| % Parse an argument, then pass it to #1. The argument is the rest of |
| % the input line (except we remove a trailing comment). #1 should be a |
| % macro which expects an ordinary undelimited TeX argument. |
| % |
| \def\parsearg{\parseargusing{}} |
| \def\parseargusing#1#2{% |
| \def\argtorun{#2}% |
| \begingroup |
| \obeylines |
| \spaceisspace |
| #1% |
| \parseargline\empty% Insert the \empty token, see \finishparsearg below. |
| } |
| |
| {\obeylines % |
| \gdef\parseargline#1^^M{% |
| \endgroup % End of the group started in \parsearg. |
| \argremovecomment #1\comment\ArgTerm% |
| }% |
| } |
| |
| % First remove any @comment, then any @c comment. |
| \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} |
| \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} |
| |
| % Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space. |
| % |
| % \argremovec might leave us with trailing space, e.g., |
| % @end itemize @c foo |
| % This space token undergoes the same procedure and is eventually removed |
| % by \finishparsearg. |
| % |
| \def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} |
| \def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} |
| \def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% |
| \def\temp{#3}% |
| \ifx\temp\empty |
| % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: |
| \let\temp\finishparsearg |
| \else |
| \let\temp\argcheckspaces |
| \fi |
| % Put the space token in: |
| \temp#1 #3\ArgTerm |
| } |
| |
| % If a _delimited_ argument is enclosed in braces, they get stripped; so |
| % to get _exactly_ the rest of the line, we had to prevent such situation. |
| % We prepended an \empty token at the very beginning and we expand it now, |
| % just before passing the control to \argtorun. |
| % (Similarily, we have to think about #3 of \argcheckspacesY above: it is |
| % either the null string, or it ends with \^^M---thus there is no danger |
| % that a pair of braces would be stripped. |
| % |
| % But first, we have to remove the trailing space token. |
| % |
| \def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} |
| |
| % \parseargdef\foo{...} |
| % is roughly equivalent to |
| % \def\foo{\parsearg\Xfoo} |
| % \def\Xfoo#1{...} |
| % |
| % Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my |
| % favourite TeX trick. --kasal, 16nov03 |
| |
| \def\parseargdef#1{% |
| \expandafter \doparseargdef \csname\string#1\endcsname #1% |
| } |
| \def\doparseargdef#1#2{% |
| \def#2{\parsearg#1}% |
| \def#1##1% |
| } |
| |
| % Several utility definitions with active space: |
| { |
| \obeyspaces |
| \gdef\obeyedspace{ } |
| |
| % Make each space character in the input produce a normal interword |
| % space in the output. Don't allow a line break at this space, as this |
| % is used only in environments like @example, where each line of input |
| % should produce a line of output anyway. |
| % |
| \gdef\sepspaces{\obeyspaces\let =\tie} |
| |
| % If an index command is used in an @example environment, any spaces |
| % therein should become regular spaces in the raw index file, not the |
| % expansion of \tie (\leavevmode \penalty \@M \ ). |
| \gdef\unsepspaces{\let =\space} |
| } |
| |
| |
| \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} |
| |
| % Define the framework for environments in texinfo.tex. It's used like this: |
| % |
| % \envdef\foo{...} |
| % \def\Efoo{...} |
| % |
| % It's the responsibility of \envdef to insert \begingroup before the |
| % actual body; @end closes the group after calling \Efoo. \envdef also |
| % defines \thisenv, so the current environment is known; @end checks |
| % whether the environment name matches. The \checkenv macro can also be |
| % used to check whether the current environment is the one expected. |
| % |
| % Non-false conditionals (@iftex, @ifset) don't fit into this, so they |
| % are not treated as enviroments; they don't open a group. (The |
| % implementation of @end takes care not to call \endgroup in this |
| % special case.) |
| |
| |
| % At runtime, environments start with this: |
| \def\startenvironment#1{\begingroup\def\thisenv{#1}} |
| % initialize |
| \let\thisenv\empty |
| |
| % ... but they get defined via ``\envdef\foo{...}'': |
| \long\def\envdef#1#2{\def#1{\startenvironment#1#2}} |
| \def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} |
| |
| % Check whether we're in the right environment: |
| \def\checkenv#1{% |
| \def\temp{#1}% |
| \ifx\thisenv\temp |
| \else |
| \badenverr |
| \fi |
| } |
| |
| % Evironment mismatch, #1 expected: |
| \def\badenverr{% |
| \errhelp = \EMsimple |
| \errmessage{This command can appear only \inenvironment\temp, |
| not \inenvironment\thisenv}% |
| } |
| \def\inenvironment#1{% |
| \ifx#1\empty |
| out of any environment% |
| \else |
| in environment \expandafter\string#1% |
| \fi |
| } |
| |
| % @end foo executes the definition of \Efoo. |
| % But first, it executes a specialized version of \checkenv |
| % |
| \parseargdef\end{% |
| \if 1\csname iscond.#1\endcsname |
| \else |
| % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 |
| \expandafter\checkenv\csname#1\endcsname |
| \csname E#1\endcsname |
| \endgroup |
| \fi |
| } |
| |
| \newhelp\EMsimple{Press RETURN to continue.} |
| |
| |
| %% Simple single-character @ commands |
| |
| % @@ prints an @ |
| % Kludge this until the fonts are right (grr). |
| \def\@{{\tt\char64}} |
| |
| % This is turned off because it was never documented |
| % and you can use @w{...} around a quote to suppress ligatures. |
| %% Define @` and @' to be the same as ` and ' |
| %% but suppressing ligatures. |
| %\def\`{{`}} |
| %\def\'{{'}} |
| |
| % Used to generate quoted braces. |
| \def\mylbrace {{\tt\char123}} |
| \def\myrbrace {{\tt\char125}} |
| \let\{=\mylbrace |
| \let\}=\myrbrace |
| \begingroup |
| % Definitions to produce \{ and \} commands for indices, |
| % and @{ and @} for the aux/toc files. |
| \catcode`\{ = \other \catcode`\} = \other |
| \catcode`\[ = 1 \catcode`\] = 2 |
| \catcode`\! = 0 \catcode`\\ = \other |
| !gdef!lbracecmd[\{]% |
| !gdef!rbracecmd[\}]% |
| !gdef!lbraceatcmd[@{]% |
| !gdef!rbraceatcmd[@}]% |
| !endgroup |
| |
| % @comma{} to avoid , parsing problems. |
| \let\comma = , |
| |
| % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent |
| % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. |
| \let\, = \c |
| \let\dotaccent = \. |
| \def\ringaccent#1{{\accent23 #1}} |
| \let\tieaccent = \t |
| \let\ubaraccent = \b |
| \let\udotaccent = \d |
| |
| % Other special characters: @questiondown @exclamdown @ordf @ordm |
| % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. |
| \def\questiondown{?`} |
| \def\exclamdown{!`} |
| \def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} |
| \def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} |
| |
| % Dotless i and dotless j, used for accents. |
| \def\imacro{i} |
| \def\jmacro{j} |
| \def\dotless#1{% |
| \def\temp{#1}% |
| \ifx\temp\imacro \ptexi |
| \else\ifx\temp\jmacro \j |
| \else \errmessage{@dotless can be used only with i or j}% |
| \fi\fi |
| } |
| |
| % The \TeX{} logo, as in plain, but resetting the spacing so that a |
| % period following counts as ending a sentence. (Idea found in latex.) |
| % |
| \edef\TeX{\TeX \spacefactor=1000 } |
| |
| % @LaTeX{} logo. Not quite the same results as the definition in |
| % latex.ltx, since we use a different font for the raised A; it's most |
| % convenient for us to use an explicitly smaller font, rather than using |
| % the \scriptstyle font (since we don't reset \scriptstyle and |
| % \scriptscriptstyle). |
| % |
| \def\LaTeX{% |
| L\kern-.36em |
| {\setbox0=\hbox{T}% |
| \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% |
| \kern-.15em |
| \TeX |
| } |
| |
| % Be sure we're in horizontal mode when doing a tie, since we make space |
| % equivalent to this in @example-like environments. Otherwise, a space |
| % at the beginning of a line will start with \penalty -- and |
| % since \penalty is valid in vertical mode, we'd end up putting the |
| % penalty on the vertical list instead of in the new paragraph. |
| {\catcode`@ = 11 |
| % Avoid using \@M directly, because that causes trouble |
| % if the definition is written into an index file. |
| \global\let\tiepenalty = \@M |
| \gdef\tie{\leavevmode\penalty\tiepenalty\ } |
| } |
| |
| % @: forces normal size whitespace following. |
| \def\:{\spacefactor=1000 } |
| |
| % @* forces a line break. |
| \def\*{\hfil\break\hbox{}\ignorespaces} |
| |
| % @/ allows a line break. |
| \let\/=\allowbreak |
| |
| % @. is an end-of-sentence period. |
| \def\.{.\spacefactor=\endofsentencespacefactor\space} |
| |
| % @! is an end-of-sentence bang. |
| \def\!{!\spacefactor=\endofsentencespacefactor\space} |
| |
| % @? is an end-of-sentence query. |
| \def\?{?\spacefactor=\endofsentencespacefactor\space} |
| |
| % @frenchspacing on|off says whether to put extra space after punctuation. |
| % |
| \def\onword{on} |
| \def\offword{off} |
| % |
| \parseargdef\frenchspacing{% |
| \def\temp{#1}% |
| \ifx\temp\onword \plainfrenchspacing |
| \else\ifx\temp\offword \plainnonfrenchspacing |
| \else |
| \errhelp = \EMsimple |
| \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% |
| \fi\fi |
| } |
| |
| % @w prevents a word break. Without the \leavevmode, @w at the |
| % beginning of a paragraph, when TeX is still in vertical mode, would |
| % produce a whole line of output instead of starting the paragraph. |
| \def\w#1{\leavevmode\hbox{#1}} |
| |
| % @group ... @end group forces ... to be all on one page, by enclosing |
| % it in a TeX vbox. We use \vtop instead of \vbox to construct the box |
| % to keep its height that of a normal line. According to the rules for |
| % \topskip (p.114 of the TeXbook), the glue inserted is |
| % max (\topskip - \ht (first item), 0). If that height is large, |
| % therefore, no glue is inserted, and the space between the headline and |
| % the text is small, which looks bad. |
| % |
| % Another complication is that the group might be very large. This can |
| % cause the glue on the previous page to be unduly stretched, because it |
| % does not have much material. In this case, it's better to add an |
| % explicit \vfill so that the extra space is at the bottom. The |
| % threshold for doing this is if the group is more than \vfilllimit |
| % percent of a page (\vfilllimit can be changed inside of @tex). |
| % |
| \newbox\groupbox |
| \def\vfilllimit{0.7} |
| % |
| \envdef\group{% |
| \ifnum\catcode`\^^M=\active \else |
| \errhelp = \groupinvalidhelp |
| \errmessage{@group invalid in context where filling is enabled}% |
| \fi |
| \startsavinginserts |
| % |
| \setbox\groupbox = \vtop\bgroup |
| % Do @comment since we are called inside an environment such as |
| % @example, where each end-of-line in the input causes an |
| % end-of-line in the output. We don't want the end-of-line after |
| % the `@group' to put extra space in the output. Since @group |
| % should appear on a line by itself (according to the Texinfo |
| % manual), we don't worry about eating any user text. |
| \comment |
| } |
| % |
| % The \vtop produces a box with normal height and large depth; thus, TeX puts |
| % \baselineskip glue before it, and (when the next line of text is done) |
| % \lineskip glue after it. Thus, space below is not quite equal to space |
| % above. But it's pretty close. |
| \def\Egroup{% |
| % To get correct interline space between the last line of the group |
| % and the first line afterwards, we have to propagate \prevdepth. |
| \endgraf % Not \par, as it may have been set to \lisppar. |
| \global\dimen1 = \prevdepth |
| \egroup % End the \vtop. |
| % \dimen0 is the vertical size of the group's box. |
| \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox |
| % \dimen2 is how much space is left on the page (more or less). |
| \dimen2 = \pageheight \advance\dimen2 by -\pagetotal |
| % if the group doesn't fit on the current page, and it's a big big |
| % group, force a page break. |
| \ifdim \dimen0 > \dimen2 |
| \ifdim \pagetotal < \vfilllimit\pageheight |
| \page |
| \fi |
| \fi |
| \box\groupbox |
| \prevdepth = \dimen1 |
| \checkinserts |
| } |
| % |
| % TeX puts in an \escapechar (i.e., `@') at the beginning of the help |
| % message, so this ends up printing `@group can only ...'. |
| % |
| \newhelp\groupinvalidhelp{% |
| group can only be used in environments such as @example,^^J% |
| where each line of input produces a line of output.} |
| |
| % @need space-in-mils |
| % forces a page break if there is not space-in-mils remaining. |
| |
| \newdimen\mil \mil=0.001in |
| |
| % Old definition--didn't work. |
| %\parseargdef\need{\par % |
| %% This method tries to make TeX break the page naturally |
| %% if the depth of the box does not fit. |
| %{\baselineskip=0pt% |
| %\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak |
| %\prevdepth=-1000pt |
| %}} |
| |
| \parseargdef\need{% |
| % Ensure vertical mode, so we don't make a big box in the middle of a |
| % paragraph. |
| \par |
| % |
| % If the @need value is less than one line space, it's useless. |
| \dimen0 = #1\mil |
| \dimen2 = \ht\strutbox |
| \advance\dimen2 by \dp\strutbox |
| \ifdim\dimen0 > \dimen2 |
| % |
| % Do a \strut just to make the height of this box be normal, so the |
| % normal leading is inserted relative to the preceding line. |
| % And a page break here is fine. |
| \vtop to #1\mil{\strut\vfil}% |
| % |
| % TeX does not even consider page breaks if a penalty added to the |
| % main vertical list is 10000 or more. But in order to see if the |
| % empty box we just added fits on the page, we must make it consider |
| % page breaks. On the other hand, we don't want to actually break the |
| % page after the empty box. So we use a penalty of 9999. |
| % |
| % There is an extremely small chance that TeX will actually break the |
| % page at this \penalty, if there are no other feasible breakpoints in |
| % sight. (If the user is using lots of big @group commands, which |
| % almost-but-not-quite fill up a page, TeX will have a hard time doing |
| % good page breaking, for example.) However, I could not construct an |
| % example where a page broke at this \penalty; if it happens in a real |
| % document, then we can reconsider our strategy. |
| \penalty9999 |
| % |
| % Back up by the size of the box, whether we did a page break or not. |
| \kern -#1\mil |
| % |
| % Do not allow a page break right after this kern. |
| \nobreak |
| \fi |
| } |
| |
| % @br forces paragraph break (and is undocumented). |
| |
| \let\br = \par |
| |
| % @page forces the start of a new page. |
| % |
| \def\page{\par\vfill\supereject} |
| |
| % @exdent text.... |
| % outputs text on separate line in roman font, starting at standard page margin |
| |
| % This records the amount of indent in the innermost environment. |
| % That's how much \exdent should take out. |
| \newskip\exdentamount |
| |
| % This defn is used inside fill environments such as @defun. |
| \parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} |
| |
| % This defn is used inside nofill environments such as @example. |
| \parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount |
| \leftline{\hskip\leftskip{\rm#1}}}} |
| |
| % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current |
| % paragraph. For more general purposes, use the \margin insertion |
| % class. WHICH is `l' or `r'. |
| % |
| \newskip\inmarginspacing \inmarginspacing=1cm |
| \def\strutdepth{\dp\strutbox} |
| % |
| \def\doinmargin#1#2{\strut\vadjust{% |
| \nobreak |
| \kern-\strutdepth |
| \vtop to \strutdepth{% |
| \baselineskip=\strutdepth |
| \vss |
| % if you have multiple lines of stuff to put here, you'll need to |
| % make the vbox yourself of the appropriate size. |
| \ifx#1l% |
| \llap{\ignorespaces #2\hskip\inmarginspacing}% |
| \else |
| \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% |
| \fi |
| \null |
| }% |
| }} |
| \def\inleftmargin{\doinmargin l} |
| \def\inrightmargin{\doinmargin r} |
| % |
| % @inmargin{TEXT [, RIGHT-TEXT]} |
| % (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; |
| % else use TEXT for both). |
| % |
| \def\inmargin#1{\parseinmargin #1,,\finish} |
| \def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. |
| \setbox0 = \hbox{\ignorespaces #2}% |
| \ifdim\wd0 > 0pt |
| \def\lefttext{#1}% have both texts |
| \def\righttext{#2}% |
| \else |
| \def\lefttext{#1}% have only one text |
| \def\righttext{#1}% |
| \fi |
| % |
| \ifodd\pageno |
| \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin |
| \else |
| \def\temp{\inleftmargin\lefttext}% |
| \fi |
| \temp |
| } |
| |
| % @include file insert text of that file as input. |
| % |
| \def\include{\parseargusing\filenamecatcodes\includezzz} |
| \def\includezzz#1{% |
| \pushthisfilestack |
| \def\thisfile{#1}% |
| {% |
| \makevalueexpandable |
| \def\temp{\input #1 }% |
| \expandafter |
| }\temp |
| \popthisfilestack |
| } |
| \def\filenamecatcodes{% |
| \catcode`\\=\other |
| \catcode`~=\other |
| \catcode`^=\other |
| \catcode`_=\other |
| \catcode`|=\other |
| \catcode`<=\other |
| \catcode`>=\other |
| \catcode`+=\other |
| \catcode`-=\other |
| } |
| |
| \def\pushthisfilestack{% |
| \expandafter\pushthisfilestackX\popthisfilestack\StackTerm |
| } |
| \def\pushthisfilestackX{% |
| \expandafter\pushthisfilestackY\thisfile\StackTerm |
| } |
| \def\pushthisfilestackY #1\StackTerm #2\StackTerm {% |
| \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% |
| } |
| |
| \def\popthisfilestack{\errthisfilestackempty} |
| \def\errthisfilestackempty{\errmessage{Internal error: |
| the stack of filenames is empty.}} |
| |
| \def\thisfile{} |
| |
| % @center line |
| % outputs that line, centered. |
| % |
| \parseargdef\center{% |
| \ifhmode |
| \let\next\centerH |
| \else |
| \let\next\centerV |
| \fi |
| \next{\hfil \ignorespaces#1\unskip \hfil}% |
| } |
| \def\centerH#1{% |
| {% |
| \hfil\break |
| \advance\hsize by -\leftskip |
| \advance\hsize by -\rightskip |
| \line{#1}% |
| \break |
| }% |
| } |
| \def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} |
| |
| % @sp n outputs n lines of vertical space |
| |
| \parseargdef\sp{\vskip #1\baselineskip} |
| |
| % @comment ...line which is ignored... |
| % @c is the same as @comment |
| % @ignore ... @end ignore is another way to write a comment |
| |
| \def\comment{\begingroup \catcode`\^^M=\other% |
| \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% |
| \commentxxx} |
| {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} |
| |
| \let\c=\comment |
| |
| % @paragraphindent NCHARS |
| % We'll use ems for NCHARS, close enough. |
| % NCHARS can also be the word `asis' or `none'. |
| % We cannot feasibly implement @paragraphindent asis, though. |
| % |
| \def\asisword{asis} % no translation, these are keywords |
| \def\noneword{none} |
| % |
| \parseargdef\paragraphindent{% |
| \def\temp{#1}% |
| \ifx\temp\asisword |
| \else |
| \ifx\temp\noneword |
| \defaultparindent = 0pt |
| \else |
| \defaultparindent = #1em |
| \fi |
| \fi |
| \parindent = \defaultparindent |
| } |
| |
| % @exampleindent NCHARS |
| % We'll use ems for NCHARS like @paragraphindent. |
| % It seems @exampleindent asis isn't necessary, but |
| % I preserve it to make it similar to @paragraphindent. |
| \parseargdef\exampleindent{% |
| \def\temp{#1}% |
| \ifx\temp\asisword |
| \else |
| \ifx\temp\noneword |
| \lispnarrowing = 0pt |
| \else |
| \lispnarrowing = #1em |
| \fi |
| \fi |
| } |
| |
| % @firstparagraphindent WORD |
| % If WORD is `none', then suppress indentation of the first paragraph |
| % after a section heading. If WORD is `insert', then do indent at such |
| % paragraphs. |
| % |
| % The paragraph indentation is suppressed or not by calling |
| % \suppressfirstparagraphindent, which the sectioning commands do. |
| % We switch the definition of this back and forth according to WORD. |
| % By default, we suppress indentation. |
| % |
| \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} |
| \def\insertword{insert} |
| % |
| \parseargdef\firstparagraphindent{% |
| \def\temp{#1}% |
| \ifx\temp\noneword |
| \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent |
| \else\ifx\temp\insertword |
| \let\suppressfirstparagraphindent = \relax |
| \else |
| \errhelp = \EMsimple |
| \errmessage{Unknown @firstparagraphindent option `\temp'}% |
| \fi\fi |
| } |
| |
| % Here is how we actually suppress indentation. Redefine \everypar to |
| % \kern backwards by \parindent, and then reset itself to empty. |
| % |
| % We also make \indent itself not actually do anything until the next |
| % paragraph. |
| % |
| \gdef\dosuppressfirstparagraphindent{% |
| \gdef\indent{% |
| \restorefirstparagraphindent |
| \indent |
| }% |
| \gdef\noindent{% |
| \restorefirstparagraphindent |
| \noindent |
| }% |
| \global\everypar = {% |
| \kern -\parindent |
| \restorefirstparagraphindent |
| }% |
| } |
| |
| \gdef\restorefirstparagraphindent{% |
| \global \let \indent = \ptexindent |
| \global \let \noindent = \ptexnoindent |
| \global \everypar = {}% |
| } |
| |
| |
| % @asis just yields its argument. Used with @table, for example. |
| % |
| \def\asis#1{#1} |
| |
| % @math outputs its argument in math mode. |
| % |
| % One complication: _ usually means subscripts, but it could also mean |
| % an actual _ character, as in @math{@var{some_variable} + 1}. So make |
| % _ active, and distinguish by seeing if the current family is \slfam, |
| % which is what @var uses. |
| { |
| \catcode`\_ = \active |
| \gdef\mathunderscore{% |
| \catcode`\_=\active |
| \def_{\ifnum\fam=\slfam \_\else\sb\fi}% |
| } |
| } |
| % Another complication: we want \\ (and @\) to output a \ character. |
| % FYI, plain.tex uses \\ as a temporary control sequence (why?), but |
| % this is not advertised and we don't care. Texinfo does not |
| % otherwise define @\. |
| % |
| % The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. |
| \def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} |
| % |
| \def\math{% |
| \tex |
| \mathunderscore |
| \let\\ = \mathbackslash |
| \mathactive |
| $\finishmath |
| } |
| \def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. |
| |
| % Some active characters (such as <) are spaced differently in math. |
| % We have to reset their definitions in case the @math was an argument |
| % to a command which sets the catcodes (such as @item or @section). |
| % |
| { |
| \catcode`^ = \active |
| \catcode`< = \active |
| \catcode`> = \active |
| \catcode`+ = \active |
| \gdef\mathactive{% |
| \let^ = \ptexhat |
| \let< = \ptexless |
| \let> = \ptexgtr |
| \let+ = \ptexplus |
| } |
| } |
| |
| % @bullet and @minus need the same treatment as @math, just above. |
| \def\bullet{$\ptexbullet$} |
| \def\minus{$-$} |
| |
| % @dots{} outputs an ellipsis using the current font. |
| % We do .5em per period so that it has the same spacing in the cm |
| % typewriter fonts as three actual period characters; on the other hand, |
| % in other typewriter fonts three periods are wider than 1.5em. So do |
| % whichever is larger. |
| % |
| \def\dots{% |
| \leavevmode |
| \setbox0=\hbox{...}% get width of three periods |
| \ifdim\wd0 > 1.5em |
| \dimen0 = \wd0 |
| \else |
| \dimen0 = 1.5em |
| \fi |
| \hbox to \dimen0{% |
| \hskip 0pt plus.25fil |
| .\hskip 0pt plus1fil |
| .\hskip 0pt plus1fil |
| .\hskip 0pt plus.5fil |
| }% |
| } |
| |
| % @enddots{} is an end-of-sentence ellipsis. |
| % |
| \def\enddots{% |
| \dots |
| \spacefactor=\endofsentencespacefactor |
| } |
| |
| % @comma{} is so commas can be inserted into text without messing up |
| % Texinfo's parsing. |
| % |
| \let\comma = , |
| |
| % @refill is a no-op. |
| \let\refill=\relax |
| |
| % If working on a large document in chapters, it is convenient to |
| % be able to disable indexing, cross-referencing, and contents, for test runs. |
| % This is done with @novalidate (before @setfilename). |
| % |
| \newif\iflinks \linkstrue % by default we want the aux files. |
| \let\novalidate = \linksfalse |
| |
| % @setfilename is done at the beginning of every texinfo file. |
| % So open here the files we need to have open while reading the input. |
| % This makes it possible to make a .fmt file for texinfo. |
| \def\setfilename{% |
| \fixbackslash % Turn off hack to swallow `\input texinfo'. |
| \iflinks |
| \tryauxfile |
| % Open the new aux file. TeX will close it automatically at exit. |
| \immediate\openout\auxfile=\jobname.aux |
| \fi % \openindices needs to do some work in any case. |
| \openindices |
| \let\setfilename=\comment % Ignore extra @setfilename cmds. |
| % |
| % If texinfo.cnf is present on the system, read it. |
| % Useful for site-wide @afourpaper, etc. |
| \openin 1 texinfo.cnf |
| \ifeof 1 \else \input texinfo.cnf \fi |
| \closein 1 |
| % |
| \comment % Ignore the actual filename. |
| } |
| |
| % Called from \setfilename. |
| % |
| \def\openindices{% |
| \newindex{cp}% |
| \newcodeindex{fn}% |
| \newcodeindex{vr}% |
| \newcodeindex{tp}% |
| \newcodeindex{ky}% |
| \newcodeindex{pg}% |
| } |
| |
| % @bye. |
| \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} |
| |
| |
| \message{pdf,} |
| % adobe `portable' document format |
| \newcount\tempnum |
| \newcount\lnkcount |
| \newtoks\filename |
| \newcount\filenamelength |
| \newcount\pgn |
| \newtoks\toksA |
| \newtoks\toksB |
| \newtoks\toksC |
| \newtoks\toksD |
| \newbox\boxA |
| \newcount\countA |
| \newif\ifpdf |
| \newif\ifpdfmakepagedest |
| |
| % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 |
| % can be set). So we test for \relax and 0 as well as \undefined, |
| % borrowed from ifpdf.sty. |
| \ifx\pdfoutput\undefined |
| \else |
| \ifx\pdfoutput\relax |
| \else |
| \ifcase\pdfoutput |
| \else |
| \pdftrue |
| \fi |
| \fi |
| \fi |
| |
| % PDF uses PostScript string constants for the names of xref targets, |
| % for display in the outlines, and in other places. Thus, we have to |
| % double any backslashes. Otherwise, a name like "\node" will be |
| % interpreted as a newline (\n), followed by o, d, e. Not good. |
| % http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html |
| % (and related messages, the final outcome is that it is up to the TeX |
| % user to double the backslashes and otherwise make the string valid, so |
| % that's what we do). |
| |
| % double active backslashes. |
| % |
| {\catcode`\@=0 \catcode`\\=\active |
| @gdef@activebackslashdouble{% |
| @catcode`@\=@active |
| @let\=@doublebackslash} |
| } |
| |
| % To handle parens, we must adopt a different approach, since parens are |
| % not active characters. hyperref.dtx (which has the same problem as |
| % us) handles it with this amazing macro to replace tokens, with minor |
| % changes for Texinfo. It is included here under the GPL by permission |
| % from the author, Heiko Oberdiek. |
| % |
| % #1 is the tokens to replace. |
| % #2 is the replacement. |
| % #3 is the control sequence with the string. |
| % |
| \def\HyPsdSubst#1#2#3{% |
| \def\HyPsdReplace##1#1##2\END{% |
| ##1% |
| \ifx\\##2\\% |
| \else |
| #2% |
| \HyReturnAfterFi{% |
| \HyPsdReplace##2\END |
| }% |
| \fi |
| }% |
| \xdef#3{\expandafter\HyPsdReplace#3#1\END}% |
| } |
| \long\def\HyReturnAfterFi#1\fi{\fi#1} |
| |
| % #1 is a control sequence in which to do the replacements. |
| \def\backslashparens#1{% |
| \xdef#1{#1}% redefine it as its expansion; the definition is simply |
| % \lastnode when called from \setref -> \pdfmkdest. |
| \HyPsdSubst{(}{\realbackslash(}{#1}% |
| \HyPsdSubst{)}{\realbackslash)}{#1}% |
| } |
| |
| \newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images |
| with PDF output, and none of those formats could be found. (.eps cannot |
| be supported due to the design of the PDF format; use regular TeX (DVI |
| output) for that.)} |
| |
| \ifpdf |
| % |
| % Color manipulation macros based on pdfcolor.tex. |
| \def\cmykDarkRed{0.28 1 1 0.35} |
| \def\cmykBlack{0 0 0 1} |
| % |
| \def\pdfsetcolor#1{\pdfliteral{#1 k}} |
| % Set color, and create a mark which defines \thiscolor accordingly, |
| % so that \makeheadline knows which color to restore. |
| \def\setcolor#1{% |
| \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% |
| \domark |
| \pdfsetcolor{#1}% |
| } |
| % |
| \def\maincolor{\cmykBlack} |
| \pdfsetcolor{\maincolor} |
| \edef\thiscolor{\maincolor} |
| \def\lastcolordefs{} |
| % |
| \def\makefootline{% |
| \baselineskip24pt |
| \line{\pdfsetcolor{\maincolor}\the\footline}% |
| } |
| % |
| \def\makeheadline{% |
| \vbox to 0pt{% |
| \vskip-22.5pt |
| \line{% |
| \vbox to8.5pt{}% |
| % Extract \thiscolor definition from the marks. |
| \getcolormarks |
| % Typeset the headline with \maincolor, then restore the color. |
| \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% |
| }% |
| \vss |
| }% |
| \nointerlineskip |
| } |
| % |
| % |
| \pdfcatalog{/PageMode /UseOutlines} |
| % |
| % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). |
| \def\dopdfimage#1#2#3{% |
| \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% |
| \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% |
| % |
| % pdftex (and the PDF format) support .png, .jpg, .pdf (among |
| % others). Let's try in that order. |
| \let\pdfimgext=\empty |
| \begingroup |
| \openin 1 #1.png \ifeof 1 |
| \openin 1 #1.jpg \ifeof 1 |
| \openin 1 #1.jpeg \ifeof 1 |
| \openin 1 #1.JPG \ifeof 1 |
| \openin 1 #1.pdf \ifeof 1 |
| \errhelp = \nopdfimagehelp |
| \errmessage{Could not find image file #1 for pdf}% |
| \else \gdef\pdfimgext{pdf}% |
| \fi |
| \else \gdef\pdfimgext{JPG}% |
| \fi |
| \else \gdef\pdfimgext{jpeg}% |
| \fi |
| \else \gdef\pdfimgext{jpg}% |
| \fi |
| \else \gdef\pdfimgext{png}% |
| \fi |
| \closein 1 |
| \endgroup |
| % |
| % without \immediate, pdftex seg faults when the same image is |
| % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) |
| \ifnum\pdftexversion < 14 |
| \immediate\pdfimage |
| \else |
| \immediate\pdfximage |
| \fi |
| \ifdim \wd0 >0pt width \imagewidth \fi |
| \ifdim \wd2 >0pt height \imageheight \fi |
| \ifnum\pdftexversion<13 |
| #1.\pdfimgext |
| \else |
| {#1.\pdfimgext}% |
| \fi |
| \ifnum\pdftexversion < 14 \else |
| \pdfrefximage \pdflastximage |
| \fi} |
| % |
| \def\pdfmkdest#1{{% |
| % We have to set dummies so commands such as @code, and characters |
| % such as \, aren't expanded when present in a section title. |
| \indexnofonts |
| \turnoffactive |
| \activebackslashdouble |
| \makevalueexpandable |
| \def\pdfdestname{#1}% |
| \backslashparens\pdfdestname |
| \safewhatsit{\pdfdest name{\pdfdestname} xyz}% |
| }} |
| % |
| % used to mark target names; must be expandable. |
| \def\pdfmkpgn#1{#1} |
| % |
| % by default, use a color that is dark enough to print on paper as |
| % nearly black, but still distinguishable for online viewing. |
| \def\urlcolor{\cmykDarkRed} |
| \def\linkcolor{\cmykDarkRed} |
| \def\endlink{\setcolor{\maincolor}\pdfendlink} |
| % |
| % Adding outlines to PDF; macros for calculating structure of outlines |
| % come from Petr Olsak |
| \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% |
| \else \csname#1\endcsname \fi} |
| \def\advancenumber#1{\tempnum=\expnumber{#1}\relax |
| \advance\tempnum by 1 |
| \expandafter\xdef\csname#1\endcsname{\the\tempnum}} |
| % |
| % #1 is the section text, which is what will be displayed in the |
| % outline by the pdf viewer. #2 is the pdf expression for the number |
| % of subentries (or empty, for subsubsections). #3 is the node text, |
| % which might be empty if this toc entry had no corresponding node. |
| % #4 is the page number |
| % |
| \def\dopdfoutline#1#2#3#4{% |
| % Generate a link to the node text if that exists; else, use the |
| % page number. We could generate a destination for the section |
| % text in the case where a section has no node, but it doesn't |
| % seem worth the trouble, since most documents are normally structured. |
| \def\pdfoutlinedest{#3}% |
| \ifx\pdfoutlinedest\empty |
| \def\pdfoutlinedest{#4}% |
| \else |
| % Doubled backslashes in the name. |
| {\activebackslashdouble \xdef\pdfoutlinedest{#3}% |
| \backslashparens\pdfoutlinedest}% |
| \fi |
| % |
| % Also double the backslashes in the display string. |
| {\activebackslashdouble \xdef\pdfoutlinetext{#1}% |
| \backslashparens\pdfoutlinetext}% |
| % |
| \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% |
| } |
| % |
| \def\pdfmakeoutlines{% |
| \begingroup |
| % Thanh's hack / proper braces in bookmarks |
| \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace |
| \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace |
| % |
| % Read toc silently, to get counts of subentries for \pdfoutline. |
| \def\numchapentry##1##2##3##4{% |
| \def\thischapnum{##2}% |
| \def\thissecnum{0}% |
| \def\thissubsecnum{0}% |
| }% |
| \def\numsecentry##1##2##3##4{% |
| \advancenumber{chap\thischapnum}% |
| \def\thissecnum{##2}% |
| \def\thissubsecnum{0}% |
| }% |
| \def\numsubsecentry##1##2##3##4{% |
| \advancenumber{sec\thissecnum}% |
| \def\thissubsecnum{##2}% |
| }% |
| \def\numsubsubsecentry##1##2##3##4{% |
| \advancenumber{subsec\thissubsecnum}% |
| }% |
| \def\thischapnum{0}% |
| \def\thissecnum{0}% |
| \def\thissubsecnum{0}% |
| % |
| % use \def rather than \let here because we redefine \chapentry et |
| % al. a second time, below. |
| \def\appentry{\numchapentry}% |
| \def\appsecentry{\numsecentry}% |
| \def\appsubsecentry{\numsubsecentry}% |
| \def\appsubsubsecentry{\numsubsubsecentry}% |
| \def\unnchapentry{\numchapentry}% |
| \def\unnsecentry{\numsecentry}% |
| \def\unnsubsecentry{\numsubsecentry}% |
| \def\unnsubsubsecentry{\numsubsubsecentry}% |
| \readdatafile{toc}% |
| % |
| % Read toc second time, this time actually producing the outlines. |
| % The `-' means take the \expnumber as the absolute number of |
| % subentries, which we calculated on our first read of the .toc above. |
| % |
| % We use the node names as the destinations. |
| \def\numchapentry##1##2##3##4{% |
| \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% |
| \def\numsecentry##1##2##3##4{% |
| \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% |
| \def\numsubsecentry##1##2##3##4{% |
| \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% |
| \def\numsubsubsecentry##1##2##3##4{% count is always zero |
| \dopdfoutline{##1}{}{##3}{##4}}% |
| % |
| % PDF outlines are displayed using system fonts, instead of |
| % document fonts. Therefore we cannot use special characters, |
| % since the encoding is unknown. For example, the eogonek from |
| % Latin 2 (0xea) gets translated to a | character. Info from |
| % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. |
| % |
| % xx to do this right, we have to translate 8-bit characters to |
| % their "best" equivalent, based on the @documentencoding. Right |
| % now, I guess we'll just let the pdf reader have its way. |
| \indexnofonts |
| \setupdatafile |
| \catcode`\\=\active \otherbackslash |
| \input \tocreadfilename |
| \endgroup |
| } |
| % |
| \def\skipspaces#1{\def\PP{#1}\def\D{|}% |
| \ifx\PP\D\let\nextsp\relax |
| \else\let\nextsp\skipspaces |
| \ifx\p\space\else\addtokens{\filename}{\PP}% |
| \advance\filenamelength by 1 |
| \fi |
| \fi |
| \nextsp} |
| \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} |
| \ifnum\pdftexversion < 14 |
| \let \startlink \pdfannotlink |
| \else |
| \let \startlink \pdfstartlink |
| \fi |
| % make a live url in pdf output. |
| \def\pdfurl#1{% |
| \begingroup |
| % it seems we really need yet another set of dummies; have not |
| % tried to figure out what each command should do in the context |
| % of @url. for now, just make @/ a no-op, that's the only one |
| % people have actually reported a problem with. |
| % |
| \normalturnoffactive |
| \def\@{@}% |
| \let\/=\empty |
| \makevalueexpandable |
| \leavevmode\setcolor{\urlcolor}% |
| \startlink attr{/Border [0 0 0]}% |
| user{/Subtype /Link /A << /S /URI /URI (#1) >>}% |
| \endgroup} |
| \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} |
| \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} |
| \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} |
| \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} |
| \def\maketoks{% |
| \expandafter\poptoks\the\toksA|ENDTOKS|\relax |
| \ifx\first0\adn0 |
| \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 |
| \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 |
| \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 |
| \else |
| \ifnum0=\countA\else\makelink\fi |
| \ifx\first.\let\next=\done\else |
| \let\next=\maketoks |
| \addtokens{\toksB}{\the\toksD} |
| \ifx\first,\addtokens{\toksB}{\space}\fi |
| \fi |
| \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi |
| \next} |
| \def\makelink{\addtokens{\toksB}% |
| {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} |
| \def\pdflink#1{% |
| \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} |
| \setcolor{\linkcolor}#1\endlink} |
| \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} |
| \else |
| \let\pdfmkdest = \gobble |
| \let\pdfurl = \gobble |
| \let\endlink = \relax |
| \let\setcolor = \gobble |
| \let\pdfsetcolor = \gobble |
| \let\pdfmakeoutlines = \relax |
| \fi % \ifx\pdfoutput |
| |
| |
| \message{fonts,} |
| |
| % Change the current font style to #1, remembering it in \curfontstyle. |
| % For now, we do not accumulate font styles: @b{@i{foo}} prints foo in |
| % italics, not bold italics. |
| % |
| \def\setfontstyle#1{% |
| \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. |
| \csname ten#1\endcsname % change the current font |
| } |
| |
| % Select #1 fonts with the current style. |
| % |
| \def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} |
| |
| \def\rm{\fam=0 \setfontstyle{rm}} |
| \def\it{\fam=\itfam \setfontstyle{it}} |
| \def\sl{\fam=\slfam \setfontstyle{sl}} |
| \def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} |
| \def\tt{\fam=\ttfam \setfontstyle{tt}} |
| |
| % Texinfo sort of supports the sans serif font style, which plain TeX does not. |
| % So we set up a \sf. |
| \newfam\sffam |
| \def\sf{\fam=\sffam \setfontstyle{sf}} |
| \let\li = \sf % Sometimes we call it \li, not \sf. |
| |
| % We don't need math for this font style. |
| \def\ttsl{\setfontstyle{ttsl}} |
| |
| |
| % Default leading. |
| \newdimen\textleading \textleading = 13.2pt |
| |
| % Set the baselineskip to #1, and the lineskip and strut size |
| % correspondingly. There is no deep meaning behind these magic numbers |
| % used as factors; they just match (closely enough) what Knuth defined. |
| % |
| \def\lineskipfactor{.08333} |
| \def\strutheightpercent{.70833} |
| \def\strutdepthpercent {.29167} |
| % |
| % can get a sort of poor man's double spacing by redefining this. |
| \def\baselinefactor{1} |
| % |
| \def\setleading#1{% |
| \dimen0 = #1\relax |
| \normalbaselineskip = \baselinefactor\dimen0 |
| \normallineskip = \lineskipfactor\normalbaselineskip |
| \normalbaselines |
| \setbox\strutbox =\hbox{% |
| \vrule width0pt height\strutheightpercent\baselineskip |
| depth \strutdepthpercent \baselineskip |
| }% |
| } |
| |
| % |
| % PDF CMaps. See also LaTeX's t1.cmap. |
| % |
| % \cmapOT1 |
| \ifpdf |
| \begingroup |
| \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. |
| \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap |
| %%DocumentNeededResources: ProcSet (CIDInit) |
| %%IncludeResource: ProcSet (CIDInit) |
| %%BeginResource: CMap (TeX-OT1-0) |
| %%Title: (TeX-OT1-0 TeX OT1 0) |
| %%Version: 1.000 |
| %%EndComments |
| /CIDInit /ProcSet findresource begin |
| 12 dict begin |
| begincmap |
| /CIDSystemInfo |
| << /Registry (TeX) |
| /Ordering (OT1) |
| /Supplement 0 |
| >> def |
| /CMapName /TeX-OT1-0 def |
| /CMapType 2 def |
| 1 begincodespacerange |
| <00> <7F> |
| endcodespacerange |
| 8 beginbfrange |
| <00> <01> <0393> |
| <09> <0A> <03A8> |
| <23> <26> <0023> |
| <28> <3B> <0028> |
| <3F> <5B> <003F> |
| <5D> <5E> <005D> |
| <61> <7A> <0061> |
| <7B> <7C> <2013> |
| endbfrange |
| 40 beginbfchar |
| <02> <0398> |
| <03> <039B> |
| <04> <039E> |
| <05> <03A0> |
| <06> <03A3> |
| <07> <03D2> |
| <08> <03A6> |
| <0B> <00660066> |
| <0C> <00660069> |
| <0D> <0066006C> |
| <0E> <006600660069> |
| <0F> <00660066006C> |
| <10> <0131> |
| <11> <0237> |
| <12> <0060> |
| <13> <00B4> |
| <14> <02C7> |
| <15> <02D8> |
| <16> <00AF> |
| <17> <02DA> |
| <18> <00B8> |
| <19> <00DF> |
| <1A> <00E6> |
| <1B> <0153> |
| <1C> <00F8> |
| <1D> <00C6> |
| <1E> <0152> |
| <1F> <00D8> |
| <21> <0021> |
| <22> <201D> |
| <27> <2019> |
| <3C> <00A1> |
| <3D> <003D> |
| <3E> <00BF> |
| <5C> <201C> |
| <5F> <02D9> |
| <60> <2018> |
| <7D> <02DD> |
| <7E> <007E> |
| <7F> <00A8> |
| endbfchar |
| endcmap |
| CMapName currentdict /CMap defineresource pop |
| end |
| end |
| %%EndResource |
| %%EOF |
| }\endgroup |
| \expandafter\edef\csname cmapOT1\endcsname#1{% |
| \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% |
| }% |
| % |
| % \cmapOT1IT |
| \begingroup |
| \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. |
| \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap |
| %%DocumentNeededResources: ProcSet (CIDInit) |
| %%IncludeResource: ProcSet (CIDInit) |
| %%BeginResource: CMap (TeX-OT1IT-0) |
| %%Title: (TeX-OT1IT-0 TeX OT1IT 0) |
| %%Version: 1.000 |
| %%EndComments |
| /CIDInit /ProcSet findresource begin |
| 12 dict begin |
| begincmap |
| /CIDSystemInfo |
| << /Registry (TeX) |
| /Ordering (OT1IT) |
| /Supplement 0 |
| >> def |
| /CMapName /TeX-OT1IT-0 def |
| /CMapType 2 def |
| 1 begincodespacerange |
| <00> <7F> |
| endcodespacerange |
| 8 beginbfrange |
| <00> <01> <0393> |
| <09> <0A> <03A8> |
| <25> <26> <0025> |
| <28> <3B> <0028> |
| <3F> <5B> <003F> |
| <5D> <5E> <005D> |
| <61> <7A> <0061> |
| <7B> <7C> <2013> |
| endbfrange |
| 42 beginbfchar |
| <02> <0398> |
| <03> <039B> |
| <04> <039E> |
| <05> <03A0> |
| <06> <03A3> |
| <07> <03D2> |
| <08> <03A6> |
| <0B> <00660066> |
| <0C> <00660069> |
| <0D> <0066006C> |
| <0E> <006600660069> |
| <0F> <00660066006C> |
| <10> <0131> |
| <11> <0237> |
| <12> <0060> |
| <13> <00B4> |
| <14> <02C7> |
| <15> <02D8> |
| <16> <00AF> |
| <17> <02DA> |
| <18> <00B8> |
| <19> <00DF> |
| <1A> <00E6> |
| <1B> <0153> |
| <1C> <00F8> |
| <1D> <00C6> |
| <1E> <0152> |
| <1F> <00D8> |
| <21> <0021> |
| <22> <201D> |
| <23> <0023> |
| <24> <00A3> |
| <27> <2019> |
| <3C> <00A1> |
| <3D> <003D> |
| <3E> <00BF> |
| <5C> <201C> |
| <5F> <02D9> |
| <60> <2018> |
| <7D> <02DD> |
| <7E> <007E> |
| <7F> <00A8> |
| endbfchar |
| endcmap |
| CMapName currentdict /CMap defineresource pop |
| end |
| end |
| %%EndResource |
| %%EOF |
| }\endgroup |
| \expandafter\edef\csname cmapOT1IT\endcsname#1{% |
| \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% |
| }% |
| % |
| % \cmapOT1TT |
| \begingroup |
| \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. |
| \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap |
| %%DocumentNeededResources: ProcSet (CIDInit) |
| %%IncludeResource: ProcSet (CIDInit) |
| %%BeginResource: CMap (TeX-OT1TT-0) |
| %%Title: (TeX-OT1TT-0 TeX OT1TT 0) |
| %%Version: 1.000 |
| %%EndComments |
| /CIDInit /ProcSet findresource begin |
| 12 dict begin |
| begincmap |
| /CIDSystemInfo |
| << /Registry (TeX) |
| /Ordering (OT1TT) |
| /Supplement 0 |
| >> def |
| /CMapName /TeX-OT1TT-0 def |
| /CMapType 2 def |
| 1 begincodespacerange |
| <00> <7F> |
| endcodespacerange |
| 5 beginbfrange |
| <00> <01> <0393> |
| <09> <0A> <03A8> |
| <21> <26> <0021> |
| <28> <5F> <0028> |
| <61> <7E> <0061> |
| endbfrange |
| 32 beginbfchar |
| <02> <0398> |
| <03> <039B> |
| <04> <039E> |
| <05> <03A0> |
| <06> <03A3> |
| <07> <03D2> |
| <08> <03A6> |
| <0B> <2191> |
| <0C> <2193> |
| <0D> <0027> |
| <0E> <00A1> |
| <0F> <00BF> |
| <10> <0131> |
| <11> <0237> |
| <12> <0060> |
| <13> <00B4> |
| <14> <02C7> |
| <15> <02D8> |
| <16> <00AF> |
| <17> <02DA> |
| <18> <00B8> |
| <19> <00DF> |
| <1A> <00E6> |
| <1B> <0153> |
| <1C> <00F8> |
| <1D> <00C6> |
| <1E> <0152> |
| <1F> <00D8> |
| <20> <2423> |
| <27> <2019> |
| <60> <2018> |
| <7F> <00A8> |
| endbfchar |
| endcmap |
| CMapName currentdict /CMap defineresource pop |
| end |
| end |
| %%EndResource |
| %%EOF |
| }\endgroup |
| \expandafter\edef\csname cmapOT1TT\endcsname#1{% |
| \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% |
| }% |
| \else |
| \expandafter\let\csname cmapOT1\endcsname\gobble |
| \expandafter\let\csname cmapOT1IT\endcsname\gobble |
| \expandafter\let\csname cmapOT1TT\endcsname\gobble |
| \fi |
| |
| |
| % Set the font macro #1 to the font named #2, adding on the |
| % specified font prefix (normally `cm'). |
| % #3 is the font's design size, #4 is a scale factor, #5 is the CMap |
| % encoding (currently only OT1, OT1IT and OT1TT are allowed, pass |
| % empty to omit). |
| \def\setfont#1#2#3#4#5{% |
| \font#1=\fontprefix#2#3 scaled #4 |
| \csname cmap#5\endcsname#1% |
| } |
| % This is what gets called when #5 of \setfont is empty. |
| \let\cmap\gobble |
| |
| |
| % Use cm as the default font prefix. |
| % To specify the font prefix, you must define \fontprefix |
| % before you read in texinfo.tex. |
| \ifx\fontprefix\undefined |
| \def\fontprefix{cm} |
| \fi |
| % Support font families that don't use the same naming scheme as CM. |
| \def\rmshape{r} |
| \def\rmbshape{bx} %where the normal face is bold |
| \def\bfshape{b} |
| \def\bxshape{bx} |
| \def\ttshape{tt} |
| \def\ttbshape{tt} |
| \def\ttslshape{sltt} |
| \def\itshape{ti} |
| \def\itbshape{bxti} |
| \def\slshape{sl} |
| \def\slbshape{bxsl} |
| \def\sfshape{ss} |
| \def\sfbshape{ss} |
| \def\scshape{csc} |
| \def\scbshape{csc} |
| |
| % Definitions for a main text size of 11pt. This is the default in |
| % Texinfo. |
| % |
| \def\definetextfontsizexi{% |
| % Text fonts (11.2pt, magstep1). |
| \def\textnominalsize{11pt} |
| \edef\mainmagstep{\magstephalf} |
| \setfont\textrm\rmshape{10}{\mainmagstep}{OT1} |
| \setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} |
| \setfont\textbf\bfshape{10}{\mainmagstep}{OT1} |
| \setfont\textit\itshape{10}{\mainmagstep}{OT1IT} |
| \setfont\textsl\slshape{10}{\mainmagstep}{OT1} |
| \setfont\textsf\sfshape{10}{\mainmagstep}{OT1} |
| \setfont\textsc\scshape{10}{\mainmagstep}{OT1} |
| \setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} |
| \font\texti=cmmi10 scaled \mainmagstep |
| \font\textsy=cmsy10 scaled \mainmagstep |
| \def\textecsize{1095} |
| |
| % A few fonts for @defun names and args. |
| \setfont\defbf\bfshape{10}{\magstep1}{OT1} |
| \setfont\deftt\ttshape{10}{\magstep1}{OT1TT} |
| \setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} |
| \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} |
| |
| % Fonts for indices, footnotes, small examples (9pt). |
| \def\smallnominalsize{9pt} |
| \setfont\smallrm\rmshape{9}{1000}{OT1} |
| \setfont\smalltt\ttshape{9}{1000}{OT1TT} |
| \setfont\smallbf\bfshape{10}{900}{OT1} |
| \setfont\smallit\itshape{9}{1000}{OT1IT} |
| \setfont\smallsl\slshape{9}{1000}{OT1} |
| \setfont\smallsf\sfshape{9}{1000}{OT1} |
| \setfont\smallsc\scshape{10}{900}{OT1} |
| \setfont\smallttsl\ttslshape{10}{900}{OT1TT} |
| \font\smalli=cmmi9 |
| \font\smallsy=cmsy9 |
| \def\smallecsize{0900} |
| |
| % Fonts for small examples (8pt). |
| \def\smallernominalsize{8pt} |
| \setfont\smallerrm\rmshape{8}{1000}{OT1} |
| \setfont\smallertt\ttshape{8}{1000}{OT1TT} |
| \setfont\smallerbf\bfshape{10}{800}{OT1} |
| \setfont\smallerit\itshape{8}{1000}{OT1IT} |
| \setfont\smallersl\slshape{8}{1000}{OT1} |
| \setfont\smallersf\sfshape{8}{1000}{OT1} |
| \setfont\smallersc\scshape{10}{800}{OT1} |
| \setfont\smallerttsl\ttslshape{10}{800}{OT1TT} |
| \font\smalleri=cmmi8 |
| \font\smallersy=cmsy8 |
| \def\smallerecsize{0800} |
| |
| % Fonts for title page (20.4pt): |
| \def\titlenominalsize{20pt} |
| \setfont\titlerm\rmbshape{12}{\magstep3}{OT1} |
| \setfont\titleit\itbshape{10}{\magstep4}{OT1IT} |
| \setfont\titlesl\slbshape{10}{\magstep4}{OT1} |
| \setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} |
| \setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} |
| \setfont\titlesf\sfbshape{17}{\magstep1}{OT1} |
| \let\titlebf=\titlerm |
| \setfont\titlesc\scbshape{10}{\magstep4}{OT1} |
| \font\titlei=cmmi12 scaled \magstep3 |
| \font\titlesy=cmsy10 scaled \magstep4 |
| \def\authorrm{\secrm} |
| \def\authortt{\sectt} |
| \def\titleecsize{2074} |
| |
| % Chapter (and unnumbered) fonts (17.28pt). |
| \def\chapnominalsize{17pt} |
| \setfont\chaprm\rmbshape{12}{\magstep2}{OT1} |
| \setfont\chapit\itbshape{10}{\magstep3}{OT1IT} |
| \setfont\chapsl\slbshape{10}{\magstep3}{OT1} |
| \setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} |
| \setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} |
| \setfont\chapsf\sfbshape{17}{1000}{OT1} |
| \let\chapbf=\chaprm |
| \setfont\chapsc\scbshape{10}{\magstep3}{OT1} |
| \font\chapi=cmmi12 scaled \magstep2 |
| \font\chapsy=cmsy10 scaled \magstep3 |
| \def\chapecsize{1728} |
| |
| % Section fonts (14.4pt). |
| \def\secnominalsize{14pt} |
| \setfont\secrm\rmbshape{12}{\magstep1}{OT1} |
| \setfont\secit\itbshape{10}{\magstep2}{OT1IT} |
| \setfont\secsl\slbshape{10}{\magstep2}{OT1} |
| \setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} |
| \setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} |
| \setfont\secsf\sfbshape{12}{\magstep1}{OT1} |
| \let\secbf\secrm |
| \setfont\secsc\scbshape{10}{\magstep2}{OT1} |
| \font\seci=cmmi12 scaled \magstep1 |
| \font\secsy=cmsy10 scaled \magstep2 |
| \def\sececsize{1440} |
| |
| % Subsection fonts (13.15pt). |
| \def\ssecnominalsize{13pt} |
| \setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} |
| \setfont\ssecit\itbshape{10}{1315}{OT1IT} |
| \setfont\ssecsl\slbshape{10}{1315}{OT1} |
| \setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} |
| \setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} |
| \setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} |
| \let\ssecbf\ssecrm |
| \setfont\ssecsc\scbshape{10}{1315}{OT1} |
| \font\sseci=cmmi12 scaled \magstephalf |
| \font\ssecsy=cmsy10 scaled 1315 |
| \def\ssececsize{1200} |
| |
| % Reduced fonts for @acro in text (10pt). |
| \def\reducednominalsize{10pt} |
| \setfont\reducedrm\rmshape{10}{1000}{OT1} |
| \setfont\reducedtt\ttshape{10}{1000}{OT1TT} |
| \setfont\reducedbf\bfshape{10}{1000}{OT1} |
| \setfont\reducedit\itshape{10}{1000}{OT1IT} |
| \setfont\reducedsl\slshape{10}{1000}{OT1} |
| \setfont\reducedsf\sfshape{10}{1000}{OT1} |
| \setfont\reducedsc\scshape{10}{1000}{OT1} |
| \setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} |
| \font\reducedi=cmmi10 |
| \font\reducedsy=cmsy10 |
| \def\reducedecsize{1000} |
| |
| % reset the current fonts |
| \textfonts |
| \rm |
| } % end of 11pt text font size definitions |
| |
| |
| % Definitions to make the main text be 10pt Computer Modern, with |
| % section, chapter, etc., sizes following suit. This is for the GNU |
| % Press printing of the Emacs 22 manual. Maybe other manuals in the |
| % future. Used with @smallbook, which sets the leading to 12pt. |
| % |
| \def\definetextfontsizex{% |
| % Text fonts (10pt). |
| \def\textnominalsize{10pt} |
| \edef\mainmagstep{1000} |
| \setfont\textrm\rmshape{10}{\mainmagstep}{OT1} |
| \setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} |
| \setfont\textbf\bfshape{10}{\mainmagstep}{OT1} |
| \setfont\textit\itshape{10}{\mainmagstep}{OT1IT} |
| \setfont\textsl\slshape{10}{\mainmagstep}{OT1} |
| \setfont\textsf\sfshape{10}{\mainmagstep}{OT1} |
| \setfont\textsc\scshape{10}{\mainmagstep}{OT1} |
| \setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} |
| \font\texti=cmmi10 scaled \mainmagstep |
| \font\textsy=cmsy10 scaled \mainmagstep |
| \def\textecsize{1000} |
| |
| % A few fonts for @defun names and args. |
| \setfont\defbf\bfshape{10}{\magstephalf}{OT1} |
| \setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} |
| \setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} |
| \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} |
| |
| % Fonts for indices, footnotes, small examples (9pt). |
| \def\smallnominalsize{9pt} |
| \setfont\smallrm\rmshape{9}{1000}{OT1} |
| \setfont\smalltt\ttshape{9}{1000}{OT1TT} |
| \setfont\smallbf\bfshape{10}{900}{OT1} |
| \setfont\smallit\itshape{9}{1000}{OT1IT} |
| \setfont\smallsl\slshape{9}{1000}{OT1} |
| \setfont\smallsf\sfshape{9}{1000}{OT1} |
| \setfont\smallsc\scshape{10}{900}{OT1} |
| \setfont\smallttsl\ttslshape{10}{900}{OT1TT} |
| \font\smalli=cmmi9 |
| \font\smallsy=cmsy9 |
| \def\smallecsize{0900} |
| |
| % Fonts for small examples (8pt). |
| \def\smallernominalsize{8pt} |
| \setfont\smallerrm\rmshape{8}{1000}{OT1} |
| \setfont\smallertt\ttshape{8}{1000}{OT1TT} |
| \setfont\smallerbf\bfshape{10}{800}{OT1} |
| \setfont\smallerit\itshape{8}{1000}{OT1IT} |
| \setfont\smallersl\slshape{8}{1000}{OT1} |
| \setfont\smallersf\sfshape{8}{1000}{OT1} |
| \setfont\smallersc\scshape{10}{800}{OT1} |
| \setfont\smallerttsl\ttslshape{10}{800}{OT1TT} |
| \font\smalleri=cmmi8 |
| \font\smallersy=cmsy8 |
| \def\smallerecsize{0800} |
| |
| % Fonts for title page (20.4pt): |
| \def\titlenominalsize{20pt} |
| \setfont\titlerm\rmbshape{12}{\magstep3}{OT1} |
| \setfont\titleit\itbshape{10}{\magstep4}{OT1IT} |
| \setfont\titlesl\slbshape{10}{\magstep4}{OT1} |
| \setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} |
| \setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} |
| \setfont\titlesf\sfbshape{17}{\magstep1}{OT1} |
| \let\titlebf=\titlerm |
| \setfont\titlesc\scbshape{10}{\magstep4}{OT1} |
| \font\titlei=cmmi12 scaled \magstep3 |
| \font\titlesy=cmsy10 scaled \magstep4 |
| \def\authorrm{\secrm} |
| \def\authortt{\sectt} |
| \def\titleecsize{2074} |
| |
| % Chapter fonts (14.4pt). |
| \def\chapnominalsize{14pt} |
| \setfont\chaprm\rmbshape{12}{\magstep1}{OT1} |
| \setfont\chapit\itbshape{10}{\magstep2}{OT1IT} |
| \setfont\chapsl\slbshape{10}{\magstep2}{OT1} |
| \setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} |
| \setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} |
| \setfont\chapsf\sfbshape{12}{\magstep1}{OT1} |
| \let\chapbf\chaprm |
| \setfont\chapsc\scbshape{10}{\magstep2}{OT1} |
| \font\chapi=cmmi12 scaled \magstep1 |
| \font\chapsy=cmsy10 scaled \magstep2 |
| \def\chapecsize{1440} |
| |
| % Section fonts (12pt). |
| \def\secnominalsize{12pt} |
| \setfont\secrm\rmbshape{12}{1000}{OT1} |
| \setfont\secit\itbshape{10}{\magstep1}{OT1IT} |
| \setfont\secsl\slbshape{10}{\magstep1}{OT1} |
| \setfont\sectt\ttbshape{12}{1000}{OT1TT} |
| \setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} |
| \setfont\secsf\sfbshape{12}{1000}{OT1} |
| \let\secbf\secrm |
| \setfont\secsc\scbshape{10}{\magstep1}{OT1} |
| \font\seci=cmmi12 |
| \font\secsy=cmsy10 scaled \magstep1 |
| \def\sececsize{1200} |
| |
| % Subsection fonts (10pt). |
| \def\ssecnominalsize{10pt} |
| \setfont\ssecrm\rmbshape{10}{1000}{OT1} |
| \setfont\ssecit\itbshape{10}{1000}{OT1IT} |
| \setfont\ssecsl\slbshape{10}{1000}{OT1} |
| \setfont\ssectt\ttbshape{10}{1000}{OT1TT} |
| \setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} |
| \setfont\ssecsf\sfbshape{10}{1000}{OT1} |
| \let\ssecbf\ssecrm |
| \setfont\ssecsc\scbshape{10}{1000}{OT1} |
| \font\sseci=cmmi10 |
| \font\ssecsy=cmsy10 |
| \def\ssececsize{1000} |
| |
| % Reduced fonts for @acro in text (9pt). |
| \def\reducednominalsize{9pt} |
| \setfont\reducedrm\rmshape{9}{1000}{OT1} |
| \setfont\reducedtt\ttshape{9}{1000}{OT1TT} |
| \setfont\reducedbf\bfshape{10}{900}{OT1} |
| \setfont\reducedit\itshape{9}{1000}{OT1IT} |
| \setfont\reducedsl\slshape{9}{1000}{OT1} |
| \setfont\reducedsf\sfshape{9}{1000}{OT1} |
| \setfont\reducedsc\scshape{10}{900}{OT1} |
| \setfont\reducedttsl\ttslshape{10}{900}{OT1TT} |
| \font\reducedi=cmmi9 |
| \font\reducedsy=cmsy9 |
| \def\reducedecsize{0900} |
| |
| % reduce space between paragraphs |
| \divide\parskip by 2 |
| |
| % reset the current fonts |
| \textfonts |
| \rm |
| } % end of 10pt text font size definitions |
| |
| |
| % We provide the user-level command |
| % @fonttextsize 10 |
| % (or 11) to redefine the text font size. pt is assumed. |
| % |
| \def\xword{10} |
| \def\xiword{11} |
| % |
| \parseargdef\fonttextsize{% |
| \def\textsizearg{#1}% |
| \wlog{doing @fonttextsize \textsizearg}% |
| % |
| % Set \globaldefs so that documents can use this inside @tex, since |
| % makeinfo 4.8 does not support it, but we need it nonetheless. |
| % |
| \begingroup \globaldefs=1 |
| \ifx\textsizearg\xword \definetextfontsizex |
| \else \ifx\textsizearg\xiword \definetextfontsizexi |
| \else |
| \errhelp=\EMsimple |
| \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} |
| \fi\fi |
| \endgroup |
| } |
| |
| |
| % In order for the font changes to affect most math symbols and letters, |
| % we have to define the \textfont of the standard families. Since |
| % texinfo doesn't allow for producing subscripts and superscripts except |
| % in the main text, we don't bother to reset \scriptfont and |
| % \scriptscriptfont (which would also require loading a lot more fonts). |
| % |
| \def\resetmathfonts{% |
| \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy |
| \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf |
| \textfont\ttfam=\tentt \textfont\sffam=\tensf |
| } |
| |
| % The font-changing commands redefine the meanings of \tenSTYLE, instead |
| % of just \STYLE. We do this because \STYLE needs to also set the |
| % current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire |
| % \tenSTYLE to set the current font. |
| % |
| % Each font-changing command also sets the names \lsize (one size lower) |
| % and \lllsize (three sizes lower). These relative commands are used in |
| % the LaTeX logo and acronyms. |
| % |
| % This all needs generalizing, badly. |
| % |
| \def\textfonts{% |
| \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl |
| \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc |
| \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy |
| \let\tenttsl=\textttsl |
| \def\curfontsize{text}% |
| \def\lsize{reduced}\def\lllsize{smaller}% |
| \resetmathfonts \setleading{\textleading}} |
| \def\titlefonts{% |
| \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl |
| \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc |
| \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy |
| \let\tenttsl=\titlettsl |
| \def\curfontsize{title}% |
| \def\lsize{chap}\def\lllsize{subsec}% |
| \resetmathfonts \setleading{25pt}} |
| \def\titlefont#1{{\titlefonts\rm #1}} |
| \def\chapfonts{% |
| \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl |
| \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc |
| \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy |
| \let\tenttsl=\chapttsl |
| \def\curfontsize{chap}% |
| \def\lsize{sec}\def\lllsize{text}% |
| \resetmathfonts \setleading{19pt}} |
| \def\secfonts{% |
| \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl |
| \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc |
| \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy |
| \let\tenttsl=\secttsl |
| \def\curfontsize{sec}% |
| \def\lsize{subsec}\def\lllsize{reduced}% |
| \resetmathfonts \setleading{16pt}} |
| \def\subsecfonts{% |
| \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl |
| \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc |
| \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy |
| \let\tenttsl=\ssecttsl |
| \def\curfontsize{ssec}% |
| \def\lsize{text}\def\lllsize{small}% |
| \resetmathfonts \setleading{15pt}} |
| \let\subsubsecfonts = \subsecfonts |
| \def\reducedfonts{% |
| \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl |
| \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc |
| \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy |
| \let\tenttsl=\reducedttsl |
| \def\curfontsize{reduced}% |
| \def\lsize{small}\def\lllsize{smaller}% |
| \resetmathfonts \setleading{10.5pt}} |
| \def\smallfonts{% |
| \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl |
| \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc |
| \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy |
| \let\tenttsl=\smallttsl |
| \def\curfontsize{small}% |
| \def\lsize{smaller}\def\lllsize{smaller}% |
| \resetmathfonts \setleading{10.5pt}} |
| \def\smallerfonts{% |
| \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl |
| \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc |
| \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy |
| \let\tenttsl=\smallerttsl |
| \def\curfontsize{smaller}% |
| \def\lsize{smaller}\def\lllsize{smaller}% |
| \resetmathfonts \setleading{9.5pt}} |
| |
| % Set the fonts to use with the @small... environments. |
| \let\smallexamplefonts = \smallfonts |
| |
| % About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample |
| % can fit this many characters: |
| % 8.5x11=86 smallbook=72 a4=90 a5=69 |
| % If we use \scriptfonts (8pt), then we can fit this many characters: |
| % 8.5x11=90+ smallbook=80 a4=90+ a5=77 |
| % For me, subjectively, the few extra characters that fit aren't worth |
| % the additional smallness of 8pt. So I'm making the default 9pt. |
| % |
| % By the way, for comparison, here's what fits with @example (10pt): |
| % 8.5x11=71 smallbook=60 a4=75 a5=58 |
| % |
| % I wish the USA used A4 paper. |
| % --karl, 24jan03. |
| |
| |
| % Set up the default fonts, so we can use them for creating boxes. |
| % |
| \definetextfontsizexi |
| |
| % Define these so they can be easily changed for other fonts. |
| \def\angleleft{$\langle$} |
| \def\angleright{$\rangle$} |
| |
| % Count depth in font-changes, for error checks |
| \newcount\fontdepth \fontdepth=0 |
| |
| % Fonts for short table of contents. |
| \setfont\shortcontrm\rmshape{12}{1000}{OT1} |
| \setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 |
| \setfont\shortcontsl\slshape{12}{1000}{OT1} |
| \setfont\shortconttt\ttshape{12}{1000}{OT1TT} |
| |
| %% Add scribe-like font environments, plus @l for inline lisp (usually sans |
| %% serif) and @ii for TeX italic |
| |
| % \smartitalic{ARG} outputs arg in italics, followed by an italic correction |
| % unless the following character is such as not to need one. |
| \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else |
| \ptexslash\fi\fi\fi} |
| \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} |
| \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} |
| |
| % like \smartslanted except unconditionally uses \ttsl. |
| % @var is set to this for defun arguments. |
| \def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} |
| |
| % like \smartslanted except unconditionally use \sl. We never want |
| % ttsl for book titles, do we? |
| \def\cite#1{{\sl #1}\futurelet\next\smartitalicx} |
| |
| \let\i=\smartitalic |
| \let\slanted=\smartslanted |
| \let\var=\smartslanted |
| \let\dfn=\smartslanted |
| \let\emph=\smartitalic |
| |
| % @b, explicit bold. |
| \def\b#1{{\bf #1}} |
| \let\strong=\b |
| |
| % @sansserif, explicit sans. |
| \def\sansserif#1{{\sf #1}} |
| |
| % We can't just use \exhyphenpenalty, because that only has effect at |
| % the end of a paragraph. Restore normal hyphenation at the end of the |
| % group within which \nohyphenation is presumably called. |
| % |
| \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} |
| \def\restorehyphenation{\hyphenchar\font = `- } |
| |
| % Set sfcode to normal for the chars that usually have another value. |
| % Can't use plain's \frenchspacing because it uses the `\x notation, and |
| % sometimes \x has an active definition that messes things up. |
| % |
| \catcode`@=11 |
| \def\plainfrenchspacing{% |
| \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m |
| \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m |
| \def\endofsentencespacefactor{1000}% for @. and friends |
| } |
| \def\plainnonfrenchspacing{% |
| \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 |
| \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 |
| \def\endofsentencespacefactor{3000}% for @. and friends |
| } |
| \catcode`@=\other |
| \def\endofsentencespacefactor{3000}% default |
| |
| \def\t#1{% |
| {\tt \rawbackslash \plainfrenchspacing #1}% |
| \null |
| } |
| \def\samp#1{`\tclose{#1}'\null} |
| \setfont\keyrm\rmshape{8}{1000}{OT1} |
| \font\keysy=cmsy9 |
| \def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% |
| \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% |
| \vbox{\hrule\kern-0.4pt |
| \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% |
| \kern-0.4pt\hrule}% |
| \kern-.06em\raise0.4pt\hbox{\angleright}}}} |
| \def\key #1{{\nohyphenation \uppercase{#1}}\null} |
| % The old definition, with no lozenge: |
| %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} |
| \def\ctrl #1{{\tt \rawbackslash \hat}#1} |
| |
| % @file, @option are the same as @samp. |
| \let\file=\samp |
| \let\option=\samp |
| |
| % @code is a modification of @t, |
| % which makes spaces the same size as normal in the surrounding text. |
| \def\tclose#1{% |
| {% |
| % Change normal interword space to be same as for the current font. |
| \spaceskip = \fontdimen2\font |
| % |
| % Switch to typewriter. |
| \tt |
| % |
| % But `\ ' produces the large typewriter interword space. |
| \def\ {{\spaceskip = 0pt{} }}% |
| % |
| % Turn off hyphenation. |
| \nohyphenation |
| % |
| \rawbackslash |
| \plainfrenchspacing |
| #1% |
| }% |
| \null |
| } |
| |
| % We *must* turn on hyphenation at `-' and `_' in @code. |
| % Otherwise, it is too hard to avoid overfull hboxes |
| % in the Emacs manual, the Library manual, etc. |
| |
| % Unfortunately, TeX uses one parameter (\hyphenchar) to control |
| % both hyphenation at - and hyphenation within words. |
| % We must therefore turn them both off (\tclose does that) |
| % and arrange explicitly to hyphenate at a dash. |
| % -- rms. |
| { |
| \catcode`\-=\active \catcode`\_=\active |
| \catcode`\'=\active \catcode`\`=\active |
| % |
| \global\def\code{\begingroup |
| \catcode\rquoteChar=\active \catcode\lquoteChar=\active |
| \let'\codequoteright \let`\codequoteleft |
| % |
| \catcode\dashChar=\active \catcode\underChar=\active |
| \ifallowcodebreaks |
| \let-\codedash |
| \let_\codeunder |
| \else |
| \let-\realdash |
| \let_\realunder |
| \fi |
| \codex |
| } |
| } |
| |
| \def\realdash{-} |
| \def\codedash{-\discretionary{}{}{}} |
| \def\codeunder{% |
| % this is all so @math{@code{var_name}+1} can work. In math mode, _ |
| % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) |
| % will therefore expand the active definition of _, which is us |
| % (inside @code that is), therefore an endless loop. |
| \ifusingtt{\ifmmode |
| \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. |
| \else\normalunderscore \fi |
| \discretionary{}{}{}}% |
| {\_}% |
| } |
| \def\codex #1{\tclose{#1}\endgroup} |
| |
| % An additional complication: the above will allow breaks after, e.g., |
| % each of the four underscores in __typeof__. This is undesirable in |
| % some manuals, especially if they don't have long identifiers in |
| % general. @allowcodebreaks provides a way to control this. |
| % |
| \newif\ifallowcodebreaks \allowcodebreakstrue |
| |
| \def\keywordtrue{true} |
| \def\keywordfalse{false} |
| |
| \parseargdef\allowcodebreaks{% |
| \def\txiarg{#1}% |
| \ifx\txiarg\keywordtrue |
| \allowcodebreakstrue |
| \else\ifx\txiarg\keywordfalse |
| \allowcodebreaksfalse |
| \else |
| \errhelp = \EMsimple |
| \errmessage{Unknown @allowcodebreaks option `\txiarg'}% |
| \fi\fi |
| } |
| |
| % @kbd is like @code, except that if the argument is just one @key command, |
| % then @kbd has no effect. |
| |
| % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), |
| % `example' (@kbd uses ttsl only inside of @example and friends), |
| % or `code' (@kbd uses normal tty font always). |
| \parseargdef\kbdinputstyle{% |
| \def\txiarg{#1}% |
| \ifx\txiarg\worddistinct |
| \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% |
| \else\ifx\txiarg\wordexample |
| \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% |
| \else\ifx\txiarg\wordcode |
| \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% |
| \else |
| \errhelp = \EMsimple |
| \errmessage{Unknown @kbdinputstyle option `\txiarg'}% |
| \fi\fi\fi |
| } |
| \def\worddistinct{distinct} |
| \def\wordexample{example} |
| \def\wordcode{code} |
| |
| % Default is `distinct.' |
| \kbdinputstyle distinct |
| |
| \def\xkey{\key} |
| \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% |
| \ifx\one\xkey\ifx\threex\three \key{#2}% |
| \else{\tclose{\kbdfont\look}}\fi |
| \else{\tclose{\kbdfont\look}}\fi} |
| |
| % For @indicateurl, @env, @command quotes seem unnecessary, so use \code. |
| \let\indicateurl=\code |
| \let\env=\code |
| \let\command=\code |
| |
| % @uref (abbreviation for `urlref') takes an optional (comma-separated) |
| % second argument specifying the text to display and an optional third |
| % arg as text to display instead of (rather than in addition to) the url |
| % itself. First (mandatory) arg is the url. Perhaps eventually put in |
| % a hypertex \special here. |
| % |
| \def\uref#1{\douref #1,,,\finish} |
| \def\douref#1,#2,#3,#4\finish{\begingroup |
| \unsepspaces |
| \pdfurl{#1}% |
| \setbox0 = \hbox{\ignorespaces #3}% |
| \ifdim\wd0 > 0pt |
| \unhbox0 % third arg given, show only that |
| \else |
| \setbox0 = \hbox{\ignorespaces #2}% |
| \ifdim\wd0 > 0pt |
| \ifpdf |
| \unhbox0 % PDF: 2nd arg given, show only it |
| \else |
| \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url |
| \fi |
| \else |
| \code{#1}% only url given, so show it |
| \fi |
| \fi |
| \endlink |
| \endgroup} |
| |
| % @url synonym for @uref, since that's how everyone uses it. |
| % |
| \let\url=\uref |
| |
| % rms does not like angle brackets --karl, 17may97. |
| % So now @email is just like @uref, unless we are pdf. |
| % |
| %\def\email#1{\angleleft{\tt #1}\angleright} |
| \ifpdf |
| \def\email#1{\doemail#1,,\finish} |
| \def\doemail#1,#2,#3\finish{\begingroup |
| \unsepspaces |
| \pdfurl{mailto:#1}% |
| \setbox0 = \hbox{\ignorespaces #2}% |
| \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi |
| \endlink |
| \endgroup} |
| \else |
| \let\email=\uref |
| \fi |
| |
| % Check if we are currently using a typewriter font. Since all the |
| % Computer Modern typewriter fonts have zero interword stretch (and |
| % shrink), and it is reasonable to expect all typewriter fonts to have |
| % this property, we can check that font parameter. |
| % |
| \def\ifmonospace{\ifdim\fontdimen3\font=0pt } |
| |
| % Typeset a dimension, e.g., `in' or `pt'. The only reason for the |
| % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. |
| % |
| \def\dmn#1{\thinspace #1} |
| |
| \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} |
| |
| % @l was never documented to mean ``switch to the Lisp font'', |
| % and it is not used as such in any manual I can find. We need it for |
| % Polish suppressed-l. --karl, 22sep96. |
| %\def\l#1{{\li #1}\null} |
| |
| % Explicit font changes: @r, @sc, undocumented @ii. |
| \def\r#1{{\rm #1}} % roman font |
| \def\sc#1{{\smallcaps#1}} % smallcaps font |
| \def\ii#1{{\it #1}} % italic font |
| |
| % @acronym for "FBI", "NATO", and the like. |
| % We print this one point size smaller, since it's intended for |
| % all-uppercase. |
| % |
| \def\acronym#1{\doacronym #1,,\finish} |
| \def\doacronym#1,#2,#3\finish{% |
| {\selectfonts\lsize #1}% |
| \def\temp{#2}% |
| \ifx\temp\empty \else |
| \space ({\unsepspaces \ignorespaces \temp \unskip})% |
| \fi |
| } |
| |
| % @abbr for "Comput. J." and the like. |
| % No font change, but don't do end-of-sentence spacing. |
| % |
| \def\abbr#1{\doabbr #1,,\finish} |
| \def\doabbr#1,#2,#3\finish{% |
| {\plainfrenchspacing #1}% |
| \def\temp{#2}% |
| \ifx\temp\empty \else |
| \space ({\unsepspaces \ignorespaces \temp \unskip})% |
| \fi |
| } |
| |
| % @pounds{} is a sterling sign, which Knuth put in the CM italic font. |
| % |
| \def\pounds{{\it\$}} |
| |
| % @euro{} comes from a separate font, depending on the current style. |
| % We use the free feym* fonts from the eurosym package by Henrik |
| % Theiling, which support regular, slanted, bold and bold slanted (and |
| % "outlined" (blackboard board, sort of) versions, which we don't need). |
| % It is available from http://www.ctan.org/tex-archive/fonts/eurosym. |
| % |
| % Although only regular is the truly official Euro symbol, we ignore |
| % that. The Euro is designed to be slightly taller than the regular |
| % font height. |
| % |
| % feymr - regular |
| % feymo - slanted |
| % feybr - bold |
| % feybo - bold slanted |
| % |
| % There is no good (free) typewriter version, to my knowledge. |
| % A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. |
| % Hmm. |
| % |
| % Also doesn't work in math. Do we need to do math with euro symbols? |
| % Hope not. |
| % |
| % |
| \def\euro{{\eurofont e}} |
| \def\eurofont{% |
| % We set the font at each command, rather than predefining it in |
| % \textfonts and the other font-switching commands, so that |
| % installations which never need the symbol don't have to have the |
| % font installed. |
| % |
| % There is only one designed size (nominal 10pt), so we always scale |
| % that to the current nominal size. |
| % |
| % By the way, simply using "at 1em" works for cmr10 and the like, but |
| % does not work for cmbx10 and other extended/shrunken fonts. |
| % |
| \def\eurosize{\csname\curfontsize nominalsize\endcsname}% |
| % |
| \ifx\curfontstyle\bfstylename |
| % bold: |
| \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize |
| \else |
| % regular: |
| \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize |
| \fi |
| \thiseurofont |
| } |
| |
| % Hacks for glyphs from the EC fonts similar to \euro. We don't |
| % use \let for the aliases, because sometimes we redefine the original |
| % macro, and the alias should reflect the redefinition. |
| \def\guillemetleft{{\ecfont \char"13}} |
| \def\guillemotleft{\guillemetleft} |
| \def\guillemetright{{\ecfont \char"14}} |
| \def\guillemotright{\guillemetright} |
| \def\guilsinglleft{{\ecfont \char"0E}} |
| \def\guilsinglright{{\ecfont \char"0F}} |
| \def\quotedblbase{{\ecfont \char"12}} |
| \def\quotesinglbase{{\ecfont \char"0D}} |
| % |
| \def\ecfont{% |
| % We can't distinguish serif/sanserif and italic/slanted, but this |
| % is used for crude hacks anyway (like adding French and German |
| % quotes to documents typeset with CM, where we lose kerning), so |
| % hopefully nobody will notice/care. |
| \edef\ecsize{\csname\curfontsize ecsize\endcsname}% |
| \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% |
| \ifx\curfontstyle\bfstylename |
| % bold: |
| \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize |
| \else |
| % regular: |
| \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize |
| \fi |
| \thisecfont |
| } |
| |
| % @registeredsymbol - R in a circle. The font for the R should really |
| % be smaller yet, but lllsize is the best we can do for now. |
| % Adapted from the plain.tex definition of \copyright. |
| % |
| \def\registeredsymbol{% |
| $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% |
| \hfil\crcr\Orb}}% |
| }$% |
| } |
| |
| % @textdegree - the normal degrees sign. |
| % |
| \def\textdegree{$^\circ$} |
| |
| % Laurent Siebenmann reports \Orb undefined with: |
| % Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 |
| % so we'll define it if necessary. |
| % |
| \ifx\Orb\undefined |
| \def\Orb{\mathhexbox20D} |
| \fi |
| |
| % Quotes. |
| \chardef\quotedblleft="5C |
| \chardef\quotedblright=`\" |
| \chardef\quoteleft=`\` |
| \chardef\quoteright=`\' |
| |
| \message{page headings,} |
| |
| \newskip\titlepagetopglue \titlepagetopglue = 1.5in |
| \newskip\titlepagebottomglue \titlepagebottomglue = 2pc |
| |
| % First the title page. Must do @settitle before @titlepage. |
| \newif\ifseenauthor |
| \newif\iffinishedtitlepage |
| |
| % Do an implicit @contents or @shortcontents after @end titlepage if the |
| % user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. |
| % |
| \newif\ifsetcontentsaftertitlepage |
| \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue |
| \newif\ifsetshortcontentsaftertitlepage |
| \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue |
| |
| \parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% |
| \endgroup\page\hbox{}\page} |
| |
| \envdef\titlepage{% |
| % Open one extra group, as we want to close it in the middle of \Etitlepage. |
| \begingroup |
| \parindent=0pt \textfonts |
| % Leave some space at the very top of the page. |
| \vglue\titlepagetopglue |
| % No rule at page bottom unless we print one at the top with @title. |
| \finishedtitlepagetrue |
| % |
| % Most title ``pages'' are actually two pages long, with space |
| % at the top of the second. We don't want the ragged left on the second. |
| \let\oldpage = \page |
| \def\page{% |
| \iffinishedtitlepage\else |
| \finishtitlepage |
| \fi |
| \let\page = \oldpage |
| \page |
| \null |
| }% |
| } |
| |
| \def\Etitlepage{% |
| \iffinishedtitlepage\else |
| \finishtitlepage |
| \fi |
| % It is important to do the page break before ending the group, |
| % because the headline and footline are only empty inside the group. |
| % If we use the new definition of \page, we always get a blank page |
| % after the title page, which we certainly don't want. |
| \oldpage |
| \endgroup |
| % |
| % Need this before the \...aftertitlepage checks so that if they are |
| % in effect the toc pages will come out with page numbers. |
| \HEADINGSon |
| % |
| % If they want short, they certainly want long too. |
| \ifsetshortcontentsaftertitlepage |
| \shortcontents |
| \contents |
| \global\let\shortcontents = \relax |
| \global\let\contents = \relax |
| \fi |
| % |
| \ifsetcontentsaftertitlepage |
| \contents |
| \global\let\contents = \relax |
| \global\let\shortcontents = \relax |
| \fi |
| } |
| |
| \def\finishtitlepage{% |
| \vskip4pt \hrule height 2pt width \hsize |
| \vskip\titlepagebottomglue |
| \finishedtitlepagetrue |
| } |
| |
| %%% Macros to be used within @titlepage: |
| |
| \let\subtitlerm=\tenrm |
| \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} |
| |
| \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines |
| \let\tt=\authortt} |
| |
| \parseargdef\title{% |
| \checkenv\titlepage |
| \leftline{\titlefonts\rm #1} |
| % print a rule at the page bottom also. |
| \finishedtitlepagefalse |
| \vskip4pt \hrule height 4pt width \hsize \vskip4pt |
| } |
| |
| \parseargdef\subtitle{% |
| \checkenv\titlepage |
| {\subtitlefont \rightline{#1}}% |
| } |
| |
| % @author should come last, but may come many times. |
| % It can also be used inside @quotation. |
| % |
| \parseargdef\author{% |
| \def\temp{\quotation}% |
| \ifx\thisenv\temp |
| \def\quotationauthor{#1}% printed in \Equotation. |
| \else |
| \checkenv\titlepage |
| \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi |
| {\authorfont \leftline{#1}}% |
| \fi |
| } |
| |
| |
| %%% Set up page headings and footings. |
| |
| \let\thispage=\folio |
| |
| \newtoks\evenheadline % headline on even pages |
| \newtoks\oddheadline % headline on odd pages |
| \newtoks\evenfootline % footline on even pages |
| \newtoks\oddfootline % footline on odd pages |
| |
| % Now make TeX use those variables |
| \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline |
| \else \the\evenheadline \fi}} |
| \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline |
| \else \the\evenfootline \fi}\HEADINGShook} |
| \let\HEADINGShook=\relax |
| |
| % Commands to set those variables. |
| % For example, this is what @headings on does |
| % @evenheading @thistitle|@thispage|@thischapter |
| % @oddheading @thischapter|@thispage|@thistitle |
| % @evenfooting @thisfile|| |
| % @oddfooting ||@thisfile |
| |
| |
| \def\evenheading{\parsearg\evenheadingxxx} |
| \def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} |
| \def\evenheadingyyy #1\|#2\|#3\|#4\finish{% |
| \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} |
| |
| \def\oddheading{\parsearg\oddheadingxxx} |
| \def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} |
| \def\oddheadingyyy #1\|#2\|#3\|#4\finish{% |
| \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} |
| |
| \parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% |
| |
| \def\evenfooting{\parsearg\evenfootingxxx} |
| \def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} |
| \def\evenfootingyyy #1\|#2\|#3\|#4\finish{% |
| \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} |
| |
| \def\oddfooting{\parsearg\oddfootingxxx} |
| \def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} |
| \def\oddfootingyyy #1\|#2\|#3\|#4\finish{% |
| \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% |
| % |
| % Leave some space for the footline. Hopefully ok to assume |
| % @evenfooting will not be used by itself. |
| \global\advance\pageheight by -12pt |
| \global\advance\vsize by -12pt |
| } |
| |
| \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} |
| |
| % @evenheadingmarks top \thischapter <- chapter at the top of a page |
| % @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page |
| % |
| % The same set of arguments for: |
| % |
| % @oddheadingmarks |
| % @evenfootingmarks |
| % @oddfootingmarks |
| % @everyheadingmarks |
| % @everyfootingmarks |
| |
| \def\evenheadingmarks{\headingmarks{even}{heading}} |
| \def\oddheadingmarks{\headingmarks{odd}{heading}} |
| \def\evenfootingmarks{\headingmarks{even}{footing}} |
| \def\oddfootingmarks{\headingmarks{odd}{footing}} |
| \def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1} |
| \headingmarks{odd}{heading}{#1} } |
| \def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1} |
| \headingmarks{odd}{footing}{#1} } |
| % #1 = even/odd, #2 = heading/footing, #3 = top/bottom. |
| \def\headingmarks#1#2#3 {% |
| \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname |
| \global\expandafter\let\csname get#1#2marks\endcsname \temp |
| } |
| |
| \everyheadingmarks bottom |
| \everyfootingmarks bottom |
| |
| % @headings double turns headings on for double-sided printing. |
| % @headings single turns headings on for single-sided printing. |
| % @headings off turns them off. |
| % @headings on same as @headings double, retained for compatibility. |
| % @headings after turns on double-sided headings after this page. |
| % @headings doubleafter turns on double-sided headings after this page. |
| % @headings singleafter turns on single-sided headings after this page. |
| % By default, they are off at the start of a document, |
| % and turned `on' after @end titlepage. |
| |
| \def\headings #1 {\csname HEADINGS#1\endcsname} |
| |
| \def\HEADINGSoff{% |
| \global\evenheadline={\hfil} \global\evenfootline={\hfil} |
| \global\oddheadline={\hfil} \global\oddfootline={\hfil}} |
| \HEADINGSoff |
| % When we turn headings on, set the page number to 1. |
| % For double-sided printing, put current file name in lower left corner, |
| % chapter name on inside top of right hand pages, document |
| % title on inside top of left hand pages, and page numbers on outside top |
| % edge of all pages. |
| \def\HEADINGSdouble{% |
| \global\pageno=1 |
| \global\evenfootline={\hfil} |
| \global\oddfootline={\hfil} |
| \global\evenheadline={\line{\folio\hfil\thistitle}} |
| \global\oddheadline={\line{\thischapter\hfil\folio}} |
| \global\let\contentsalignmacro = \chapoddpage |
| } |
| \let\contentsalignmacro = \chappager |
| |
| % For single-sided printing, chapter title goes across top left of page, |
| % page number on top right. |
| \def\HEADINGSsingle{% |
| \global\pageno=1 |
| \global\evenfootline={\hfil} |
| \global\oddfootline={\hfil} |
| \global\evenheadline={\line{\thischapter\hfil\folio}} |
| \global\oddheadline={\line{\thischapter\hfil\folio}} |
| \global\let\contentsalignmacro = \chappager |
| } |
| \def\HEADINGSon{\HEADINGSdouble} |
| |
| \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} |
| \let\HEADINGSdoubleafter=\HEADINGSafter |
| \def\HEADINGSdoublex{% |
| \global\evenfootline={\hfil} |
| \global\oddfootline={\hfil} |
| \global\evenheadline={\line{\folio\hfil\thistitle}} |
| \global\oddheadline={\line{\thischapter\hfil\folio}} |
| \global\let\contentsalignmacro = \chapoddpage |
| } |
| |
| \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} |
| \def\HEADINGSsinglex{% |
| \global\evenfootline={\hfil} |
| \global\oddfootline={\hfil} |
| \global\evenheadline={\line{\thischapter\hfil\folio}} |
| \global\oddheadline={\line{\thischapter\hfil\folio}} |
| \global\let\contentsalignmacro = \chappager |
| } |
| |
| % Subroutines used in generating headings |
| % This produces Day Month Year style of output. |
| % Only define if not already defined, in case a txi-??.tex file has set |
| % up a different format (e.g., txi-cs.tex does this). |
| \ifx\today\undefined |
| \def\today{% |
| \number\day\space |
| \ifcase\month |
| \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr |
| \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug |
| \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec |
| \fi |
| \space\number\year} |
| \fi |
| |
| % @settitle line... specifies the title of the document, for headings. |
| % It generates no output of its own. |
| \def\thistitle{\putwordNoTitle} |
| \def\settitle{\parsearg{\gdef\thistitle}} |
| |
| |
| \message{tables,} |
| % Tables -- @table, @ftable, @vtable, @item(x). |
| |
| % default indentation of table text |
| \newdimen\tableindent \tableindent=.8in |
| % default indentation of @itemize and @enumerate text |
| \newdimen\itemindent \itemindent=.3in |
| % margin between end of table item and start of table text. |
| \newdimen\itemmargin \itemmargin=.1in |
| |
| % used internally for \itemindent minus \itemmargin |
| \newdimen\itemmax |
| |
| % Note @table, @ftable, and @vtable define @item, @itemx, etc., with |
| % these defs. |
| % They also define \itemindex |
| % to index the item name in whatever manner is desired (perhaps none). |
| |
| \newif\ifitemxneedsnegativevskip |
| |
| \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} |
| |
| \def\internalBitem{\smallbreak \parsearg\itemzzz} |
| \def\internalBitemx{\itemxpar \parsearg\itemzzz} |
| |
| \def\itemzzz #1{\begingroup % |
| \advance\hsize by -\rightskip |
| \advance\hsize by -\tableindent |
| \setbox0=\hbox{\itemindicate{#1}}% |
| \itemindex{#1}% |
| \nobreak % This prevents a break before @itemx. |
| % |
| % If the item text does not fit in the space we have, put it on a line |
| % by itself, and do not allow a page break either before or after that |
| % line. We do not start a paragraph here because then if the next |
| % command is, e.g., @kindex, the whatsit would get put into the |
| % horizontal list on a line by itself, resulting in extra blank space. |
| \ifdim \wd0>\itemmax |
| % |
| % Make this a paragraph so we get the \parskip glue and wrapping, |
| % but leave it ragged-right. |
| \begingroup |
| \advance\leftskip by-\tableindent |
| \advance\hsize by\tableindent |
| \advance\rightskip by0pt plus1fil |
| \leavevmode\unhbox0\par |
| \endgroup |
| % |
| % We're going to be starting a paragraph, but we don't want the |
| % \parskip glue -- logically it's part of the @item we just started. |
| \nobreak \vskip-\parskip |
| % |
| % Stop a page break at the \parskip glue coming up. However, if |
| % what follows is an environment such as @example, there will be no |
| % \parskip glue; then the negative vskip we just inserted would |
| % cause the example and the item to crash together. So we use this |
| % bizarre value of 10001 as a signal to \aboveenvbreak to insert |
| % \parskip glue after all. Section titles are handled this way also. |
| % |
| \penalty 10001 |
| \endgroup |
| \itemxneedsnegativevskipfalse |
| \else |
| % The item text fits into the space. Start a paragraph, so that the |
| % following text (if any) will end up on the same line. |
| \noindent |
| % Do this with kerns and \unhbox so that if there is a footnote in |
| % the item text, it can migrate to the main vertical list and |
| % eventually be printed. |
| \nobreak\kern-\tableindent |
| \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 |
| \unhbox0 |
| \nobreak\kern\dimen0 |
| \endgroup |
| \itemxneedsnegativevskiptrue |
| \fi |
| } |
| |
| \def\item{\errmessage{@item while not in a list environment}} |
| \def\itemx{\errmessage{@itemx while not in a list environment}} |
| |
| % @table, @ftable, @vtable. |
| \envdef\table{% |
| \let\itemindex\gobble |
| \tablecheck{table}% |
| } |
| \envdef\ftable{% |
| \def\itemindex ##1{\doind {fn}{\code{##1}}}% |
| \tablecheck{ftable}% |
| } |
| \envdef\vtable{% |
| \def\itemindex ##1{\doind {vr}{\code{##1}}}% |
| \tablecheck{vtable}% |
| } |
| \def\tablecheck#1{% |
| \ifnum \the\catcode`\^^M=\active |
| \endgroup |
| \errmessage{This command won't work in this context; perhaps the problem is |
| that we are \inenvironment\thisenv}% |
| \def\next{\doignore{#1}}% |
| \else |
| \let\next\tablex |
| \fi |
| \next |
| } |
| \def\tablex#1{% |
| \def\itemindicate{#1}% |
| \parsearg\tabley |
| } |
| \def\tabley#1{% |
| {% |
| \makevalueexpandable |
| \edef\temp{\noexpand\tablez #1\space\space\space}% |
| \expandafter |
| }\temp \endtablez |
| } |
| \def\tablez #1 #2 #3 #4\endtablez{% |
| \aboveenvbreak |
| \ifnum 0#1>0 \advance \leftskip by #1\mil \fi |
| \ifnum 0#2>0 \tableindent=#2\mil \fi |
| \ifnum 0#3>0 \advance \rightskip by #3\mil \fi |
| \itemmax=\tableindent |
| \advance \itemmax by -\itemmargin |
| \advance \leftskip by \tableindent |
| \exdentamount=\tableindent |
| \parindent = 0pt |
| \parskip = \smallskipamount |
| \ifdim \parskip=0pt \parskip=2pt \fi |
| \let\item = \internalBitem |
| \let\itemx = \internalBitemx |
| } |
| \def\Etable{\endgraf\afterenvbreak} |
| \let\Eftable\Etable |
| \let\Evtable\Etable |
| \let\Eitemize\Etable |
| \let\Eenumerate\Etable |
| |
| % This is the counter used by @enumerate, which is really @itemize |
| |
| \newcount \itemno |
| |
| \envdef\itemize{\parsearg\doitemize} |
| |
| \def\doitemize#1{% |
| \aboveenvbreak |
| \itemmax=\itemindent |
| \advance\itemmax by -\itemmargin |
| \advance\leftskip by \itemindent |
| \exdentamount=\itemindent |
| \parindent=0pt |
| \parskip=\smallskipamount |
| \ifdim\parskip=0pt \parskip=2pt \fi |
| \def\itemcontents{#1}% |
| % @itemize with no arg is equivalent to @itemize @bullet. |
| \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi |
| \let\item=\itemizeitem |
| } |
| |
| % Definition of @item while inside @itemize and @enumerate. |
| % |
| \def\itemizeitem{% |
| \advance\itemno by 1 % for enumerations |
| {\let\par=\endgraf \smallbreak}% reasonable place to break |
| {% |
| % If the document has an @itemize directly after a section title, a |
| % \nobreak will be last on the list, and \sectionheading will have |
| % done a \vskip-\parskip. In that case, we don't want to zero |
| % parskip, or the item text will crash with the heading. On the |
| % other hand, when there is normal text preceding the item (as there |
| % usually is), we do want to zero parskip, or there would be too much |
| % space. In that case, we won't have a \nobreak before. At least |
| % that's the theory. |
| \ifnum\lastpenalty<10000 \parskip=0in \fi |
| \noindent |
| \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% |
| \vadjust{\penalty 1200}}% not good to break after first line of item. |
| \flushcr |
| } |
| |
| % \splitoff TOKENS\endmark defines \first to be the first token in |
| % TOKENS, and \rest to be the remainder. |
| % |
| \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% |
| |
| % Allow an optional argument of an uppercase letter, lowercase letter, |
| % or number, to specify the first label in the enumerated list. No |
| % argument is the same as `1'. |
| % |
| \envparseargdef\enumerate{\enumeratey #1 \endenumeratey} |
| \def\enumeratey #1 #2\endenumeratey{% |
| % If we were given no argument, pretend we were given `1'. |
| \def\thearg{#1}% |
| \ifx\thearg\empty \def\thearg{1}\fi |
| % |
| % Detect if the argument is a single token. If so, it might be a |
| % letter. Otherwise, the only valid thing it can be is a number. |
| % (We will always have one token, because of the test we just made. |
| % This is a good thing, since \splitoff doesn't work given nothing at |
| % all -- the first parameter is undelimited.) |
| \expandafter\splitoff\thearg\endmark |
| \ifx\rest\empty |
| % Only one token in the argument. It could still be anything. |
| % A ``lowercase letter'' is one whose \lccode is nonzero. |
| % An ``uppercase letter'' is one whose \lccode is both nonzero, and |
| % not equal to itself. |
| % Otherwise, we assume it's a number. |
| % |
| % We need the \relax at the end of the \ifnum lines to stop TeX from |
| % continuing to look for a <number>. |
| % |
| \ifnum\lccode\expandafter`\thearg=0\relax |
| \numericenumerate % a number (we hope) |
| \else |
| % It's a letter. |
| \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax |
| \lowercaseenumerate % lowercase letter |
| \else |
| \uppercaseenumerate % uppercase letter |
| \fi |
| \fi |
| \else |
| % Multiple tokens in the argument. We hope it's a number. |
| \numericenumerate |
| \fi |
| } |
| |
| % An @enumerate whose labels are integers. The starting integer is |
| % given in \thearg. |
| % |
| \def\numericenumerate{% |
| \itemno = \thearg |
| \startenumeration{\the\itemno}% |
| } |
| |
| % The starting (lowercase) letter is in \thearg. |
| \def\lowercaseenumerate{% |
| \itemno = \expandafter`\thearg |
| \startenumeration{% |
| % Be sure we're not beyond the end of the alphabet. |
| \ifnum\itemno=0 |
| \errmessage{No more lowercase letters in @enumerate; get a bigger |
| alphabet}% |
| \fi |
| \char\lccode\itemno |
| }% |
| } |
| |
| % The starting (uppercase) letter is in \thearg. |
| \def\uppercaseenumerate{% |
| \itemno = \expandafter`\thearg |
| \startenumeration{% |
| % Be sure we're not beyond the end of the alphabet. |
| \ifnum\itemno=0 |
| \errmessage{No more uppercase letters in @enumerate; get a bigger |
| alphabet} |
| \fi |
| \char\uccode\itemno |
| }% |
| } |
| |
| % Call \doitemize, adding a period to the first argument and supplying the |
| % common last two arguments. Also subtract one from the initial value in |
| % \itemno, since @item increments \itemno. |
| % |
| \def\startenumeration#1{% |
| \advance\itemno by -1 |
| \doitemize{#1.}\flushcr |
| } |
| |
| % @alphaenumerate and @capsenumerate are abbreviations for giving an arg |
| % to @enumerate. |
| % |
| \def\alphaenumerate{\enumerate{a}} |
| \def\capsenumerate{\enumerate{A}} |
| \def\Ealphaenumerate{\Eenumerate} |
| \def\Ecapsenumerate{\Eenumerate} |
| |
| |
| % @multitable macros |
| % Amy Hendrickson, 8/18/94, 3/6/96 |
| % |
| % @multitable ... @end multitable will make as many columns as desired. |
| % Contents of each column will wrap at width given in preamble. Width |
| % can be specified either with sample text given in a template line, |
| % or in percent of \hsize, the current width of text on page. |
| |
| % Table can continue over pages but will only break between lines. |
| |
| % To make preamble: |
| % |
| % Either define widths of columns in terms of percent of \hsize: |
| % @multitable @columnfractions .25 .3 .45 |
| % @item ... |
| % |
| % Numbers following @columnfractions are the percent of the total |
| % current hsize to be used for each column. You may use as many |
| % columns as desired. |
| |
| |
| % Or use a template: |
| % @multitable {Column 1 template} {Column 2 template} {Column 3 template} |
| % @item ... |
| % using the widest term desired in each column. |
| |
| % Each new table line starts with @item, each subsequent new column |
| % starts with @tab. Empty columns may be produced by supplying @tab's |
| % with nothing between them for as many times as empty columns are needed, |
| % ie, @tab@tab@tab will produce two empty columns. |
| |
| % @item, @tab do not need to be on their own lines, but it will not hurt |
| % if they are. |
| |
| % Sample multitable: |
| |
| % @multitable {Column 1 template} {Column 2 template} {Column 3 template} |
| % @item first col stuff @tab second col stuff @tab third col |
| % @item |
| % first col stuff |
| % @tab |
| % second col stuff |
| % @tab |
| % third col |
| % @item first col stuff @tab second col stuff |
| % @tab Many paragraphs of text may be used in any column. |
| % |
| % They will wrap at the width determined by the template. |
| % @item@tab@tab This will be in third column. |
| % @end multitable |
| |
| % Default dimensions may be reset by user. |
| % @multitableparskip is vertical space between paragraphs in table. |
| % @multitableparindent is paragraph indent in table. |
| % @multitablecolmargin is horizontal space to be left between columns. |
| % @multitablelinespace is space to leave between table items, baseline |
| % to baseline. |
| % 0pt means it depends on current normal line spacing. |
| % |
| \newskip\multitableparskip |
| \newskip\multitableparindent |
| \newdimen\multitablecolspace |
| \newskip\multitablelinespace |
| \multitableparskip=0pt |
| \multitableparindent=6pt |
| \multitablecolspace=12pt |
| \multitablelinespace=0pt |
| |
| % Macros used to set up halign preamble: |
| % |
| \let\endsetuptable\relax |
| \def\xendsetuptable{\endsetuptable} |
| \let\columnfractions\relax |
| \def\xcolumnfractions{\columnfractions} |
| \newif\ifsetpercent |
| |
| % #1 is the @columnfraction, usually a decimal number like .5, but might |
| % be just 1. We just use it, whatever it is. |
| % |
| \def\pickupwholefraction#1 {% |
| \global\advance\colcount by 1 |
| \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% |
| \setuptable |
| } |
| |
| \newcount\colcount |
| \def\setuptable#1{% |
| \def\firstarg{#1}% |
| \ifx\firstarg\xendsetuptable |
| \let\go = \relax |
| \else |
| \ifx\firstarg\xcolumnfractions |
| \global\setpercenttrue |
| \else |
| \ifsetpercent |
| \let\go\pickupwholefraction |
| \else |
| \global\advance\colcount by 1 |
| \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a |
| % separator; typically that is always in the input, anyway. |
| \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% |
| \fi |
| \fi |
| \ifx\go\pickupwholefraction |
| % Put the argument back for the \pickupwholefraction call, so |
| % we'll always have a period there to be parsed. |
| \def\go{\pickupwholefraction#1}% |
| \else |
| \let\go = \setuptable |
| \fi% |
| \fi |
| \go |
| } |
| |
| % multitable-only commands. |
| % |
| % @headitem starts a heading row, which we typeset in bold. |
| % Assignments have to be global since we are inside the implicit group |
| % of an alignment entry. Note that \everycr resets \everytab. |
| \def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% |
| % |
| % A \tab used to include \hskip1sp. But then the space in a template |
| % line is not enough. That is bad. So let's go back to just `&' until |
| % we encounter the problem it was intended to solve again. |
| % --karl, nathan@acm.org, 20apr99. |
| \def\tab{\checkenv\multitable &\the\everytab}% |
| |
| % @multitable ... @end multitable definitions: |
| % |
| \newtoks\everytab % insert after every tab. |
| % |
| \envdef\multitable{% |
| \vskip\parskip |
| \startsavinginserts |
| % |
| % @item within a multitable starts a normal row. |
| % We use \def instead of \let so that if one of the multitable entries |
| % contains an @itemize, we don't choke on the \item (seen as \crcr aka |
| % \endtemplate) expanding \doitemize. |
| \def\item{\crcr}% |
| % |
| \tolerance=9500 |
| \hbadness=9500 |
| \setmultitablespacing |
| \parskip=\multitableparskip |
| \parindent=\multitableparindent |
| \overfullrule=0pt |
| \global\colcount=0 |
| % |
| \everycr = {% |
| \noalign{% |
| \global\everytab={}% |
| \global\colcount=0 % Reset the column counter. |
| % Check for saved footnotes, etc. |
| \checkinserts |
| % Keeps underfull box messages off when table breaks over pages. |
| %\filbreak |
| |